注水煤体应力能 V-f 转化与释放机理研究

文章分析了在煤层注水湿润后煤体弹性能的转化与消耗过程，给出在湿润状态下能量由体变弹性能向形变弹性能转化进而自耗释放的理论模型。指出在坚硬干燥煤体中，注水后在水压力和毛细力的切割作用下，裂隙大量扩展，丰富了自由裂隙，产生更多的裂隙启发(裂隙切口)，使原来近似的刚性煤体变成由裂隙分割的块体组成的组合体或半组合体。裂隙中水的粘滞作用及水分子吸附力使块体问粘性结合、刚度降低、形变增大。煤体形变弹性能自身消耗释放的形式有3种：产生剪应力导致自由裂隙问错动摩擦；强度降低，使裂隙启发被劈裂成自由裂隙；湿润煤体蠕变性增强，产生整体性移动作功。初步给出能量消耗的量化表达式。通过这一理论，能建立煤层注水湿润度与冲击地压灾害发生的更直接的关系，使进一步量化该关系成为可能。从更深层次解释煤层注水防治冲击地压的机理。     

应用PIV系统研究横流中近壁水平圆柱绕流旋涡特性

应用粒子图像测速(PIV)系统对横流中近壁水平圆柱绕流进行了试验研究。介绍了试验原理及装置,讨论了试验参数的选取和粒子的跟随性问题。分析了上游来流的流动特性,显示了亚临界雷诺数下间隙比为0.5时圆柱后尾流区旋涡产生、发展和消亡的动态过程,比较了时均流场和瞬时流场旋涡结构。对圆柱尾迹的旋涡脱落特性进行了分析,得出在试验条件下斯特劳哈尔数保持为常数0.2的结论。     

车牌识别仪在车辆管理系统中的应用

本文通过对用户需求的分析，提出了一套具有车牌识别功能的小区车辆管理解决方案。其中对车牌识别仪在小区车辆管理系统中的应用、车牌识别技术及该设计方案中应用系统的功能做了较详细的介绍。     

滑坡治理中格构锚固结构的解析解分析

在分析格构锚固结构受力的基础上 ,将格构梁简化为受集中力作用的弹性地基上的梁 ,提出了格构锚固结构的力学模型 ,利用 Winkler弹性地基上梁的解析解对格构梁进行了内力和变形的分析 ,发现格构梁的受力状况受弹性特征λ、梁格间距 ls以及悬臂长度影响 ;建议梁长 l与λ宜满足 lλ≥ 2π;采用较小间距的格构梁以及小吨位锚索 ,间距宜满足 lsλ<π/ 2 ,悬臂长度取 (0 .3～ 0 .5 ) ls,并将分析结论应用于三峡库区巴东太矶头东滑坡治理工程的设计中     

大别造山带地壳泊松比结构与超高压变质带—来自宽角反射与近垂直反射剖面的启示

综合宽角反射、近垂直反射的探测结果和有关地质资料，对大别造山带地壳结构和超高压变质带研究显示：大别造山带地壳具有层块结构特征。沿安义－庄墓剖面，上地壳有7个弹性块体，中地壳有5个，下地壳有4个。扬子与华北地块的主缝合带是超高压变质带，扬子地块与大别造山带的现今分界线是与郯庐断裂相交的太湖－马庙断裂，磨子潭－晓天断裂是大别造山带的北界，北淮阳构造带呈楔状向下插入，它与华北地块的分界是肥中断裂。郯庐断裂在中、上地壳近于直立，下地壳向西倾斜。超高压变质带的厚度为5－7km，产状向北插入到北大别块体之下，折返过程是构造就位，不是大别山的均匀抬升，折返的主运动面是水吼－五河高温剪切带。     

西南某电站右岸倾坡内夹泥裂隙成因探讨

西南某拟建大型水电站的右岸岩体中存在倾向坡内的夹泥裂隙，通过对其的发育情况以及所处的地质环境进行系统的研究和认真剖析，认为该区内的倾坡内夹泥裂隙的成因并非正常卸荷引起，而是在构造的基础上，穹隆挽近期隆起的结果，为右岸坝肩稳定性评价提供了可靠的依据。     

新疆东天山斑岩型铜矿带及其大地构造格局

新疆哈密南部发现的土屋、延东大型斑岩铜(钼)矿床,构成了东天山斑岩铜矿带。其中成矿的斜长花岗斑岩同位素年龄为369～356 Ma(Rb-Sr等时线法和单颗粒锆石U-Pb法),辉钼矿的同位素年龄为320 Ma(Re-Os等时线法),蚀变岩的同位素年龄为341～310Ma,含矿围岩由粗面质玄武岩到粗安岩,可能属于泥盆纪(416Ma,Sm-Nd法;>356 Ma、390 Ma、440 Ma,单颗粒锆石U-Pb法)。矿床成因归属为岛弧火山—深成作用产物。斑岩铜矿带的南部为著名的康古尔塔格金矿带,再往南为星星峡银矿带。这些造山带矿床组合由北而南构成斑岩型铜(钽)矿带→韧性剪切带型和浅成热液型金矿带→浅成热液型(构造蚀变带型)钼矿带,显示了构造岩浆是由北而南下插的,岩浆侵位时间北老南新,花岗质岩浆源区的部分熔融深度由北而南加深。反映壳幔演化的东天山构造岩浆作用从370 Ma到240 Ma、从北部的哈尔里克和康古尔塔格到南部的中天山,似乎存在一个连续的花岗质岩浆演化带,丝毫看不到深部作用过程由于古生代东天山数度拉张沦为海槽而被中断的迹象。基于以上主要证据,本文综合讨论了东天山斑岩型铜矿、韧性剪切带型金矿和构造蚀变带型银矿的形成机制及其大地构造格局,建立了东天山造山带的成矿模型,为今后找矿开辟了新方向。     

Numerical evaluation of the damping‐solvent extraction method in the frequency domain

The damping‐solvent extraction method for the analysis of unbounded visco‐elastic media is evaluated numerically in the frequency domain in order to investigate the influence of the computational parameters—domain size, amount of artificial damping, and mesh density—on the accuracy of results. An analytical estimate of this influence is presented, and specific questions regarding the influence of the parameters on the results are answered using the analytical estimate and numerical results for two classical problems: the rigid strip and rigid disc footings on a visco‐elastic half‐space with constant hysteretic material damping. As the domain size is increased, the results become more accurate only at lower frequencies, but are essentially unaffected at higher frequencies. Choosing the domain size to ensure that the static stiffness is computed accurately leads to an unnecessarily large domain for analysis at higher frequencies. The results improve by increasing artificial damping but at a slower rate as the total (material plus artificial) damping ratio ζ_t gets closer to 0.866. However, the results do not deteriorate significantly for the larger amounts of artificial damping, suggesting that ζ_t≈0.6 is appropriate; a larger value is not likely to influence the accuracy of results. Presented results do not support the earlier suggestion that similar accuracy can be achieved by a large bounded domain with small damping or by a small domain with larger damping. Copyright © 2002 John Wiley & Sons, Ltd.     

裂隙型单斜介质中弹性系数的计算及波的传播特性研究

根据Hudson等关于裂隙介质弹性系数计算的扰动理论及Bond变换矩阵原理，给出了各向同性介质中含多组垂直裂隙时等效弹性系数的计算方法。计算了含两组斜交的垂直裂隙形成的单斜各向异性介质中的等效弹性系数，并根据Christoffel方程推导、得出水平面内平面波传播的相速度和群速度随方位变化的特性。     

A non-linear stress-stiffness model for geomaterials at small to intermediate strains

A double exponential fitting model (DEFM) capable of expressing the non-linear stress-stiffness relationship of geomaterials has been proposed by Shibuya et al. (1997). The model comprises two material constants; the elastic stiffness at very small strains and the strength, together with other free parameters to determine the complete stress-stiffness relationship. In this paper, the capability of the original function used for DEFM in simulating the tangent stiffness-stress relationship of geomaterials is first discussed. Second, the methods for determining the free model parameters, as well as its conversion to obtain a stress-strain relationship are proposed. The applicability of DEFM to predicting non-linear stress-stiffness relationship is examined in detail in a total of forty-nine fitting cases of compression test data on sedimentary rock, artificial soft rock and soft clay. It is found that the DEFM is effective in expressing the non-linear stress-stiffness relationship of various kinds of geomaterials at small to intermediate strains, say less than 0.5%. The superiority of this model compared to other fitting models currently in use is also demonstrated in some of the fitting cases.