Estimation of Uplift Capacity of Rapidly Loaded Plate Anchors in Soft Clay

Plate anchors are extensively used in civil engineering constructions as they provide an economical alternative to gravity and other embedded anchors. The rate of loading is one of the important factors that affects the magnitude of soil resistance as well as soil suction force. This article outlines the effect of pullout rate on uplift behavior of plate anchors (70 mm diameter) buried in soft saturated clay by varying the pullout rate from 1.4 mm/min to 21.0 mm/min. The variation of breakout force and suction force with embedment depth and rate of pull are presented. A correlation between the rate of increase of undrained strength of clay and anchor capacity with rate of strain has been established. Finally an empirical equation has been proposed that includes the rate of pull in the estimation of breakout capacity of anchors.     

Discussion: A review on the behaviour of helical piles as a potential offshore foundation system

Abstract

Helical piles have emerged as an attractive foundation system for offshore applications with renewed interest from the offshore community. Significant research gap currently exists in transferring this technology offshore and this paper discusses how existing and emerging knowledge can be successfully used to bridge some of the gaps. We focus on the Coupled Eulerian Lagrangian (CEL) large deformation finite element (LDFE) modelling technique that is commercially available and can be used to model the three-dimensional installation process with consideration of strain rate and softening effects in soft offshore clays. A helical pile of L?=?7.5?m long is modelled with one or two large-diameter helices (D?=?2?m) attached to a central shaft of d?=?0.5?m in diameter.The net effect of strain rate and softening is to increase the installation torque. The measured torque is within the range of 200–400?kN.m for the offshore clay and the pile geometry studied. Additional helices increase the uplift force but to a lesser degree than that of the measured torque. Remoulding induced strength reduction is found to be within the range of 25–33% of the intact clay strength. Issues of extracting and reusing offshore helical pile foundations are discussed.     

Sustainable shellfish aquaculture in Saldanha Bay,South Africa

The carrying capacity for bivalve shellfish culture in Saldanha Bay, South Africa, was analysed through the application of the well-tested EcoWin ecological model, in order to simulate key ecosystem variables. The model was set up using: (i) oceanographic and water-quality data collected from Saldanha Bay, and (ii) culture-practice information provided by local shellfish farmers. EcoWin successfully reproduced key ecological processes, simulating an annual mean phytoplankton biomass of 7.5 µg Chl a l^–1 and an annual harvested shellfish biomass of about 3 000 tonnes (t) y^–1, in good agreement with reported yield. The maximum annual carrying capacity of Small Bay was estimated as 20 000 t live weight (LW) of oysters Crassostrea gigas, or alternatively 5 100 t LW of mussels Mytilus galloprovincialis, and for Big Bay as 100 000 t LW of oysters. Two production scenarios were investigated for Small Bay: a production of 4 000 t LW y^–1 of mussels, and the most profitable scenario for oysters of 19 700 t LW y^–1. The main conclusions of this work are: (i) in 2015–2016, both Small Bay and Big Bay were below their maximum production capacity; (ii) the current production of shellfish potentially removes 85% of the human nitrogen inputs; (iii) a maximum-production scenario in both Big Bay and Small Bay would result in phytoplankton depletion in the farmed area; (iv) increasing the production intensity in Big Bay would probably impact the existing cultures in Small Bay; and (v) the production in Small Bay could be increased, resulting in higher income for farmers.     

基于荧光原理的叶绿素a传感器校准方法研究

利用传感器对水体叶绿素a 浓度进行原位测量是获取实时、连续、长时间序列数据的重要手段。本文在对RBR 传感器和ECO（Environmental Characterization Optics）传感器进行原理分析和线性度、稳定性、重复性等基本性能测试的基础上，利用单一藻种培养液和2020年南海北部海域现场数据校准传感器，并对新的传感器校准系数进行验证。结果表明：两台传感器使用新系数比原出厂系数的叶绿素a 浓度测量准确度有明显提高。RBR 传感器现场数据校准系数的计算结果与叶绿素a 标准值误差最小，平均绝对误差从1.93 μg/L 减小到0.35 μg/L，平均相对误差从55.1%减小到10.9%；ECO 传感器藻液系数明显优于出厂系数和现场数据校准系数的计算结果，平均绝对误差从1.76 μg/L 减小到0.59 μg/L，平均相对误差从50.3%减小到15.1%。传感器测量准确度的提高，可为海洋环境监测、海洋生态灾害预警等工作获取真实可靠数据提供支撑。     

三角褐指藻体分泌物质对汞的络合作用

本文测定了一次培养实验和连续培养实验中三角褐指藻胞外产物的变化及其与汞的络合性能。28天的培养过程中测得胞外产物与汞的络合容量C_L为2.6×10~(-5)mol/dm~3;表观稳定常数K′为6.1×10~(10)。该结果解释了细胞培养过程中胞外有机物的释放对汞的解毒机理及对介质中汞形态的转化。     

Prediction of Load Carrying Capacity of Corroded Reinforced Concrete Beam

A novel method for prediction of the load carrying capacity of a corroded reinforced concrete beam (CRCB) is presented in the paper. Nine reinforced concrete beams, which had been working in an aggressive environment for more than 10 years, were tested in the laboratory. Comprehensive tests, including flexural test, strength test for corroded concrete and rusty rebar, and pullout test for bond strength between concrete and rebar, were condueted. The flexural test results of CRCBs reveal that the distribution of surface cracks on the beams shows a fractal behavior. The relationship between the fractal dimensions and mechanical properties of CRCBs is then studied. A prediction model based on artificial neural network (ANN) is established by the use of the fractal dimension as the corrosion index, together with the basic intbrmation of the beam. The validity of the prediction model is demonstrated through the experimental data, and satisfactory resuits are achieved.     

半封闭海湾潮间带部分围垦后纳潮量计算的商榷——以胶州湾为例

传统的海湾(泻湖)纳潮量计算方法不能精确地反映潮间带被部分围垦后纳潮量的实际情况,本考虑围堤的影响,将纳潮量分解为堤基以下的“梯形”区和堤基以上的“矩形”区两部分之和,在理论上更加严密。根据改进后方法算出的胶州湾近期纳潮量比传统方法算出的纳潮量大15％左右。可见,半个多世纪以来胶州湾的纳潮量只减少了约15％．而不是传统方法得出的约25％。     

极谱法测定海水介质的铜络合容量

采用新极谱技术(1.5次微分)的阳极溶出伏安滴定方法测定天然海水的铜络合容量和条件稳定常数。对测试条件、EDTA回收率和有关问题进行了探讨。青岛近岸水样的九次平行测定表明,铜的表现络合容量为3.01×10~(-7)mol/dm~3,条件稳定常数为7.34×10~7,相对标准偏差分别为9.2％和13.8％。     

Microphytobenthos vertical migratory photoresponse as characterised by light-response curves of surface biomass

The migratory response of intertidal microphytobenthos to changes in irradiance was studied on undisturbed estuarine sediments. Two non-destructive optical techniques were used to trace variations in vivo of surface biomass: PAM fluorometry, for measuring the minimum fluorescence level (F_o); and spectral reflectance analysis, for quantifying the normalized difference vegetation index (NDVI). Following the formation of a dense biofilm at the surface, replicated sediment samples were simultaneously exposed to six different irradiance levels, ranging from 50 to 1500 μmol m⁻² s⁻¹, during a period of 120 min. The migratory photoresponse of the biofilms was characterised by constructing biomass vs. light curves (BLC), relating the accumulation of microalgal biomass after that period (estimated by F_o or NDVI) to the irradiance level incident on the surface. BLCs allow characterising the main features of the migratory photoresponse of intact biofilms. Typical BLC showed a clear biphasic pattern, with an increase in microalgal accumulation under irradiances below 100 μmol m⁻² s⁻¹, maximum values under 100–250 μmol m⁻² s⁻¹, and a gradual decrease of surface biomass under higher irradiances, indicating a strong photophobic downward migratory response. Similar BLC patterns were obtained when measuring F_o or NDVI. The construction of BLCs for biofilms from intertidal sites with distinctive sediment characteristics and diatom taxonomic composition allowed to detected significant differences in the migratory photoresponse. Biofilms from a muddy sediment exhibited considerably larger amplitude in the migratory photoresponse than the biofilms from a sandy mud site, especially under high irradiances. The photophobic migratory response to high light was found to vary among diatom species, particularly in the case of the biofilms from the muddy sediments.