Observed and modelled tidal currents in the New Zealand region

Tidal currents derived from current meter measurements are compared with the output from a barotropic tidal model of the New Zealand region. For the semi‐diurnal constituents there was very good agreement for the M₂ tide and good agreement for the S₂ tide. For the diurnal constituents (K_l, O_l) it was found that as the amplitude of the constituents decreased so did both the model/observation agreement and the accuracy of the observed tidal ellipse parameters. Consequently it was not possible to decide whether differences arose through shortcomings in the model or in the data. However, the overall performance of the model as a prognostic tool for ocean tidal current simulation appears to be good.     

A Note on Tsunami Bore Front

A note is presented on tsunami bore front. This tsunami bore front is an old dynamical problem but also a new problem to be understood. The tsunami event on 2004 December 26 has raised this is an urgent problem. The author introduces here a model in order to see a hydrodynamical specific property of the tsunami bore front. This modeling gives us a new understanding about what mechanics is for the interested tsunami bore front, especially, around a coastal zone. This work adds a new understanding about mechanics of water motions as the tsunamis generated by the earthquake undersea at a distant area from the coast. The model in this work points out a specific transitional pattern as a function of time and space of tsunami bore front. This modeling gives what is essential at considering tsunami bore front.     

Vulnerability Assessment at Village Level Due to Tides,Surges and Wave Setup

An assessment of cyclone risk and vulnerability at the village level has evolved, which is an important component of the information system for local level development action plans for preparedness and mitigation. Here, a case study for the Nellore district along the east coast of India is considered. Using maximum probable surges along the coast, total water level (TWL) due to the combined effect of surge, tide, and wind wave is computed for the most vulnerable coastal villages of the Nellore district due to any tropical cyclones. The computations suggest that the TWL along the Nellore coast varies from 2 m in the south to 4 m in the north.     

Estimation of Land Subsidence Based on Groundwater Flow Model

This article presents an approach for estimating land subsidence due to withdrawal of groundwater. The proposed method calculates the groundwater seepage in 3-D-condition and calculates the land subsidence one-dimensionally. The governing equation on groundwater seepage is based on the three-dimensional mass conservation law and the principle of effective stress. The land subsidence calculation method is derived based on the following assumptions: (1) displacements occur only in the vertical direction, and (2) in vertical direction the total stresses do not change. The governing equation is solved by numerical method, i.e., finite element method (FEM) in spatial discretization and finite difference method (FDM) in time series discretization. In FEM Galerkin method is adopted and in FDM, lumped matrix method is employed. The proposed method is calibrated via analyzing 1-D consolidation problem and the results are compared with those from Terzaghi's one-dimensional consolidation theory and oedometer test. The proposed method is employed to analyze the consolidation of a soft layer due to withdrawal of groundwater from an aquifer under it. Moreover, this method is also applied to a field case of land subsidence due to groundwater pumping in a gas production field in Japan. The analytical results are compared with the field observed data. The results show that this approach simulates the field case well.     

Time-Dependent Deformation Behavior of Jiangsu Marine Clay

In this article, the mechanical behavior of a Jiangsu marine clay was investigated by drained triaxial tests, traixial rheological tests, and one-dimensional compression and swelling tests. A visco-plastic model, the Bingham model combining two yield surfaces model, was proposed to describe the time-dependent deformation behaviors of the marine clay. The governing equation of Biot's consolidation theory for the visco-plastic soil is solved using a finite element code which incorporates the visco-plastic model. Using the finite element method, settlements of a typical embankment on the Lianxu expressway in China are calculated. Settlement calculations using the visco-plastic model are in agreement with the measured settlements in the field. The results demonstrate that the visco-plastic model is appropriate for calculating the visco-plastic deformations of Jiangsu marine clay. Theoretical and experimental studies show that the visco-plastic deformation of Jiangsu marine clay is substantial.     

利用卫星遥感资料估算海面太阳辐照度的初步结果

本文在分析了若干由卫星信息提取地表的太阳辐照度物理模式的基础上,将１９９５年５月２６日的ＮＯＡＡ卫星ＡＶＨＲＲ资料经适当变换后,选用Ｈａｙ和Ｈａｎｓｏｎ模式估算并分析了黄渤海３５°～４０°Ｎ、１２０°～１２５°Ｅ海区的海面太阳辐照度值。文中指出,卫星测量可成为海面太阳辐照度观测的有效手段。建议：１）尽快在国内开展这方面的研究;２）应进行海洋实况测量（最好是卫星过境时同步进行）;３）建立从卫星资料提取我国海区海面辐照度的适用算法。     

细粒酒精模型冰的弯曲强度试验研究

基于不同制冰条件和工的细粒酒精模型冰层原位悬臂弯曲强度试验,给出细料酒精模型冰弯曲强度;分析了考虑和不考虑不浮力效应对弯曲强度的差异;利用向睡向下弯曲强度结果给出该模型冰各向同性的证据;得到该冰弯曲强度与其密度、冰内未冻液含量和制冷过程可控制因子的关系,并作为定量控制模型冰质量的基础。     

Boussinesq方程波浪数学模型的应用

介绍了Ｂｏｕｓｓｉｎｅｓｑ 方程的推导过程和发展过程,基于深水和缓变地形的色散关系,建立了Ｂｏｕｓｓｉｎｅｓｑ方程的波浪数学模型。该模型可以产生波浪,模拟吸收边界和不同反射率的反射边界。该模型可用于研究深水和浅水地区波浪的浅水变形、折射、绕射和反射     

FY-3A/MERSI, ocean color algorithm, products and demonstrative applications

A medium resolution spectral imager (MERSI) on-board the first spacecraft of the second generation of China’s polar-orbit meteorological satellites FY-3A, is a MODIS-like sensor with 20 bands covering visible to thermal infrared spectral region. FY-3A/MERSI is capable of making continuous global observations, and ocean color application is one of its main targets. The objective is to provide information about the ocean color products of FY-3A/MERSI, including sensor calibration, ocean color algorithms, ocean color products validation and applications. Although there is a visible on-board calibration device, it cannot realize the on-board absolute radiometric calibration in the reflective solar bands. A multisite vicarious calibration method is developed, and used for monitoring the in-flight response change and providing post-launch calibration coefficients updating. FY-3A/MERSI ocean color products consist of the water-leaving reflectance retrieved from an atmospheric correction algorithm, a chlorophyll a concentration (CHL1) and a pigment concentration (PIG1) from global empirical models, the chlorophyll a concentration (CHL2), a total suspended mater concentration (TSM) and the absorption coefficient of CDOM and NAP (YS443) from China’s regional empirical models. The atmospheric correction algorithm based on lookup tables and ocean color components concentration estimation models are described. By comparison with in situ data, the FY-3A/MERSI ocean color products have been validated and preliminary results are presented. Some successful ocean color applications such as algae bloom monitoring and coastal suspended sediment variation have demonstrated the usefulness of FY-3A/MERSI ocean color products.     

利用Argo 浮标资料研究西北太平洋三维声速分布特征

利用西北太平洋海区2002～2009年的Argo浮标剖面温度、盐度资料构建成0.5°×0.5°水平分辨率的三维声速网格化资料,并据此分析该海区声速的空间分布及季节变化特征。研究表明：该海区10 m层等声速线分布的季节变化较为明显,春、冬季的等声速线几乎与纬线平行,黑潮流经区域等声速线呈现一定的弯曲。100 m层等声速线分布的季节变化较小：北赤道流区,等声速线从外海向近岸延伸;吕宋岛东南部沿海,等声速线向南弯曲;吕宋岛、台湾岛东部等声速线呈现偏北方向的弯曲;琉球群岛附近,等声速线朝北偏东方向弯曲。此外,研究海区存在深海声道,声道轴最深的区域主要在吕宋海峡和日本东南部海区,其中吕宋海峡处的声道轴有显著的季节变化特征。可见,利用Argo浮标资料可以初步得到西北太平洋声速的空间分布及其季节变化特征,随着Argo剖面资料的增多,对该海区的声速场认识将会愈加清晰。