Weathering: Toward a Fractal Quantifying

Weathering occurs over a wide range of scales. To link features through these scales is a major challenge for interdisciplinary weathering studies. Fractal approach seems to be specially useful for this purpose. We introduce a multistep fractal weathering assessment scheme devoted to extract fractal weathering classifiers from texture analysis of the mineral's image. Our scheme enables to quantitatively estimate the global and local information about the geometry of the weathering pattern. This information is basic to develop geometrical indices of weathering, which can significantly enrich the common qualitative and semiquantitative weathering assessment schemes. To justify the fractal approach, a strong statistical self-similarity has been documented for both the weathering and fresh features of two common silica minerals: quartz and biogenic A-opal (phytolith) over four orders of length scales. The procedure is fast, drastically reduces thresholding bias, promises to be universal, it is valid for genetically different minerals and rock types, scale independent, and specially useful for monitoring the changes in the mineral's roughness during the alteration. Two of the proposed classifiers seem to be potentially useful for direct application in the field and be used by nonspecialist.     

A study of microearthquake seismicity and focal mechanisms within the Sea of Marmara (NW Turkey) using ocean bottom seismometers (OBSs)

We have carried out seismological observations within the Sea of Marmara (NW Turkey) in order to investigate the seismicity induced after Gölcük–İzmit (Kocaeli) earthquake (M_w 7.4) of August 17, 1999, using ocean bottom seismometers (OBSs). High-resolution hypocenters and focal mechanisms of microearthquakes have been investigated during this Marmara Sea OBS project involving deployment of 10 OBSs within the Çınarcık (eastern Marmara Sea) and Central-Tekirdağ (western Marmara Sea) basins during April–July 2000. Little was known about microearthquake activity and their source mechanisms in the Marmara Sea. We have detected numerous microearthquakes within the main basins of the Sea of Marmara along the imaged strands of the North Anatolian Fault (NAF). We obtained more than 350 well-constrained hypocenters and nine composite focal mechanisms during 70 days of observation. Microseismicity mainly occurred along the Main Marmara Fault (MMF) in the Marmara Sea. There are a few events along the Southern Shelf. Seismic activity along the Main Marmara Fault is quite high, and focal depth distribution was shallower than 20 km along the western part of this fault, and shallower than 15 km along its eastern part. From high-resolution relative relocation studies of some of the microearthquake clusters, we suggest that the western Main Marmara Fault is subvertical and the eastern Main Marmara Fault dips to south at 45°. Composite focal mechanisms show a strike-slip regime on the western Main Marmara Fault and complex faulting (strike-slip and normal faulting) on the eastern Main Marmara Fault.     

描述黄河中下游河道横断面形态的新指标

描述河流横断面的窄深程度,无非是用来衡量它对过流能力和输沙能力的影响大小,及其在河流地貌方面的时空上的调整变化。回顾总结了以往描述横断面形态的常用指标,包括河相系数、宽深比,或湿周与平均水深的比值,指出这几种指标在描述黄河中下游河道时所存在的共同缺点:(1)缺乏物理意义;(2)不能真正代表断面的窄深程度;(3)明显的夸大了宽浅和窄深断面的差别。从表称流量的概念出发,作者认为,应该使用具有明确物理意义的等面积的表称流速来描述断面形态。如果用表称流速来衡量黄河下游河南和山东河道的断面形态的差别,就会发现,断面形态的不同,其对过流能力的影响不过1:2,远不象河相系数和宽深比所描述的达到1:6甚至1:11那样的悬殊程度;黄河下游河道主槽“多来多排”的主要影响因素是表称流速。     

合理设计岩屑规程保证正常钻进条件——金刚石钻进技术专题之一

论述了正常钻进的条件，提出了合理岩屑规程是保证正常钻进的关键和设计钻头的主要依据之一，讨论了岩屑规程与金刚石钻头唇面工作状态、孔底表面粗糙度和岩屑粒度的关系，提出了相应的建议。     

SEDIMENT TRANSPORT, DELTA GROWTH AND SEDIMENTATION IN LAKE NIGARDSVATN, NORWAY

ABSTRACT. The retreat of Nigardsbreen, an outlet glacier from the ice-cap Jostedalsbreen in south-central Norway, from its largest extent during the Little Ice Age, uncovered a proglacial lake during 1936–1967. This lake, Nigardsvatn, has been studied since 1968 in order to obtain data on solid material carried by the meltwater stream from the glacier, both in suspension and as bottom load. Between 70 and 85% of the suspended sediment has been deposited on the lake bottom, forming annual varves. The coarse material has been deposited in a delta, the formation of which started in 1968. Its growth, and hence the volume of total annual bottom load, has been surveyed annually for the past 36 years. In 1969 the entire bottom load was collected by building a fence-like net across the river. Material >3 cm was caught by this net, and formed approximately half the amount of suspended sediment transport during the same three-week period. Annual average deposition on the delta was 11800×10³ kg for the period 1968–2003. This is almost the same amount as carried in suspension from the glacier on an annual mean basis for the 36-year period. If conditions remain constant, the lake will be completely filled in about 500 years. The glacier erosion is calculated to be 0.3 mm/a.     

Exploring the interaction of surface roughness and slope gradient in controlling rates of soil loss from sloping farmland on the Loess Plateau of China

Surface roughness and slope gradient are two important factors influencing soil erosion. The objective of this study was to investigate the interaction of surface roughness and slope gradient in controlling soil loss from sloping farmland due to water erosion on the Loess Plateau, China. Following the surface features of sloping farmland in the plateau region, we manually prepared rough surfaces using four tillage practices (contour drilling, artificial digging, manual hoeing, and contour plowing), with a smooth surface as the control measure. Five slope gradients (3°, 5°, 10°, 15°, and 20°) and two rainfall intensities (60 and 90 mm/hr) were considered in the artificial rainfall simulation experiment. The results showed that the runoff volume and sediment yield increased with increasing slope gradient under the same tillage treatment. At gentle slope gradients (e.g., 3° and 5°), the increase in surface roughness prevented the runoff and sediment production, that is, the surface roughness reduced the positive effect of slope gradient on the runoff volume and sediment yield to a certain extent. At steep slope gradients, however, the enhancing effect of slope gradient on soil erosion gradually increased and surpassed the reduction effect of surface roughness. This study reveals the existence of a critical slope gradient that influences the interaction of surface roughness and slope gradient in controlling soil erosion on sloping farmland. If the slope gradient is equal to or less than the critical value, an increase in surface roughness would decrease soil erosion. Otherwise, the increase in surface roughness would be ineffective for preventing soil erosion. The critical slope gradient would be smaller under higher rainfall intensity. These findings are helpful for us to understand the process of soil erosion and relevant for supporting soil and water conservation in the Loess Plateau region of China.     

Effect of bed surface roughness on longitudinal dispersion in artificial open channels

In several empirical and modelling studies on river hydraulics, dispersion was negatively correlated to surface roughness. In this study, it was aimed to investigate the influence of surface roughness on longitudinal dispersion under controlled conditions. In artificial flow channels with a length of 104 m, tracer experiments with variations in channel bed material were performed. By use of measured tracer breakthrough curves, average flow velocity, mean longitudinal dispersion, and mean longitudinal dispersivity were calculated. Longitudinal dispersion coefficients ranged from 0·018 m² s^?1 in channels with smooth bed surface up to 0·209 m² s^?1 in channels with coarse gravel as bed material. Longitudinal dispersion was linearly related to mean flow velocity. Accordingly, longitudinal dispersivities ranged between 0·152 ± 0·017 m in channels with smooth bed surface and 0·584 ± 0·015 m in identical channels with a coarse gravel substrate. Grain size and surface roughness of the channel bed were found to correlate positively to longitudinal dispersion. This finding contradicts several existing relations between surface roughness and dispersion. Future studies should include further variation in surface roughness to derive a better‐founded empirical equation forecasting longitudinal dispersion from surface roughness. Copyright © 2011 John Wiley & Sons, Ltd.     

Flow processes and sedimentation in unidirectionally migrating deep‐water channels: From a three‐dimensional seismic perspective

Three‐dimensional seismic data were used to infer how bottom currents control unidirectional channel migration. Bottom currents flowing towards the steep bank would deflect the upper part of sediment gravity flows at an orientation of 1° to 11° to the steep bank, yielding a helical flow circulation consisting of a faster near‐surface flow towards the steep bank and a slower basal return flow towards the gentle bank. This helical flow model is evidenced by the occurrence of bigger, muddier (suggested by low‐amplitude seismic reflections) lateral accretion deposits and gentle channel wall with downlap terminations on the gentle bank and by smaller, sandier (indicated by high‐amplitude seismic reflectors) channel fills and steep channel walls with truncation terminations on the steep bank. This helical flow circulation promotes asymmetrical depositional patterns with dipping accretion sets restricted to the gentle bank, which restricts the development of sinuosity and yields unidirectional channel migration. These results aid in obtaining a complete picture of flow processes and sedimentation in submarine channels.