Dynamic riverine landscapes: the role of ecosystem engineers

An important and highly active research agenda has developed at the interface of fluvial geomorphology and ecology that addresses the capacity for vegetation and animals to act as ecosystem engineers within fluvial systems. This paper briefly introduces this research domain and describes the 15 papers that contribute to the special issue on 'Dynamic riverine landscapes: the role of ecosystem engineers'. The papers illustrate the breadth of research activity at this interface, investigating the influence of a range of ecosystem engineering organisms through a combination of field study, laboratory experiments, numerical simulation and analysis of remotely sensed data. Together, the papers address a series of key themes: conceptual frameworks for feedbacks between aquatic biota, hydraulics, sediment dynamics and nutrient dynamics and their quantification through experimental and field research; the potential contribution of ecosystem engineering species to assist river recovery and restoration; and the contribution of riparian vegetation to bank stability and morphodynamics across a range of spatio‐temporal scales. Copyright © 2015 John Wiley & Sons, Ltd.     

A seismic monitoring approach to detect and quantify river sediment mobilization by steelhead redd-building activity

The role of spawning salmonids in altering river bed morphology and sediment transport is significant, yet poorly understood. This is due, in large part, to limitations in monitoring the redd-building process in a continuous and spatially extended way. A complementary approach may be provided through the use of a small seismic sensor network analysing the ground motion signals generated by the agitation of sediment during the redd-building process. We successfully tested the viability of this approach by detecting and locating artificially generated redd signals in a reach of the Mashel River, Washington State, USA. We then utilize records of 17 seismic stations, in which we automatically detected seismic events that were subsequently manually checked, yielding a catalogue of 45 potential redd-building events. Such redd-building events typically lasted between 1 and 20 min and consisted of a series of clusters of 50–100 short energetic pulses in the 20–60 Hz frequency range. The majority (>90%) of these redd-building events occurred within 11 days, predominantly during the early morning and late afternoon. The seismically derived locations of the signals were in agreement with independently mapped redds. Improved network geometry and installation conditions are required for more efficient detection, robust location and improved energetic insights into redd-building processes in larger reaches. The passive and continuous nature of the seismic approach in detecting redds and describing fish behaviour provides a novel tool for fish biologists and fisheries managers, but also for fluvial geomorphologists, interested in quantifying the amount of sediment mobilized by this ecosystem engineer. When complemented with classic approaches, it could allow for a more holistic picture of the kinetics and temporal patterns (at scales from seconds to multiple seasons) of a key phase of salmonid life cycles. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd     

Understanding processes of island development on an island braided river over timescales from days to decades

Bar colonization by vegetation and subsequent island formation is a key bio-geomorphological process in fluvial landscape evolution. Here we investigate morphological and ecological evolution of river islands over timescales from single floods to decades, focusing on islands initiated by deposited trees that sprout to form vegetated patches. On a braided reach of the high-energy Tagliamento River, Italy, we monitored 30 pioneer islands of 1 to 17 years age in comparison with unvegetated bar surfaces, open areas between islands, and established island surfaces. We integrated morphological, surface sediment and vegetation properties of islands initiated by different flood events, combining evidence from remotely-sensed and ground observations, flow and climate time series. At a decadal timescale, pioneer islands aggrade rapidly to the elevation of the mean annual flood, showing a steady increase in vegetation canopy height, fining of surface sediments from predominantly gravel to silty-sand with a notable clay and organic fraction. The standing vegetation included over 130 species, with the largest number on island surfaces of intermediate elevation and flood disturbance. As islands age, standing vegetation becomes comprised mainly of competitor species with transient seed banks and typical of woodland, scrub, pasture and wetland habitats, whereas the winter seedbank is dominated on all surfaces by ruderal species with persistent seedbanks, mainly associated with aquatic, wetland, pasture, arable and wasteland habitats. At shorter timescales, the biogeomorphological trajectory of pioneer islands is initiated by large flood events that control the elevation of deposited trees, and subsequent flows that control tree survival and establishment. Island morphological evolution depends on the frequency-magnitude of sediment and seed delivery and redistribution by flood and possibly wind events, whereas island ability to retain sediments reflects the degree of vegetation establishment, which in the short-term may vary with seasonal to annual moisture supply, substrate characteristics and climatic growth conditions. © 2018 John Wiley & Sons, Ltd.     

Colonization and weathering of engineering materials by marine microorganisms: an SEM study

Microorganisms are a ubiquitous feature of most hard substrata on Earth and their role in the geomorphological alteration of rock and stone is widely recognized. The role of microorganisms in the modification of engineering materials introduced into the intertidal zone through the construction of hard coastal defences is less well understood. Here we use scanning electron microscopy (SEM) to examine microbial colonization and micro‐scale geomorphological features on experimental blocks of limestone, granite and marine concrete after eight months' exposure in the intertidal zone in Cornwall, UK. Significant differences in the occurrence of microbial growth features, and micro‐scale weathering and erosion features were observed between material types (ANOVA p < 0·000). Exposed limestone blocks were characterized by euendolithic borehole erosion (99% occurrence) within the upper 34·0 ± 12·3 µm of the surface. Beneath the zone of boring, inorganic weathering (chemical dissolution and salt action) had occurred to a depth of 125·0 ± 39·0 µm. Boring at the surface of concrete was less common (27% occurrence), while bio‐chemical crusting was abundant (94% occurrence, mean thickness 45·1 ± 27·7 µm). Crusts consisted of biological cells, salts and other chemical precipitates. Evidence of cryptoendolithic growth was also observed in limestone and concrete, beneath the upper zone of weathering. On granite, biological activity was restricted to thin epilithic films (<10 µm thickness) with some limited evidence of mechanical breakdown. Results presented here demonstrate the influence of substratum lithology, hardness and texture on the nature of early micro‐scale colonization, and the susceptibility of different engineering materials to organic weathering and erosion processes in the intertidal zone. The implications of differences in initial biogeomorphic responses of materials for long‐term rock weathering, ecology and engineering durability are discussed. Copyright © 2010 John Wiley & Sons, Ltd.     

THERMAL BEHAVIOR OF URBAN LANDSCAPES AND THE URBAN HEAT ISLAND

The cause or causes of urban heat islands have puzzled scientists for more than a century. Investigators have observed a close relation between urban land cover and urban temperature patterns. A proposed explanation of this relation is that the thermal inertia of urban surfaces is larger than rural interface thermal inertia. However, recent METROMEX and remote sensor satellite observations do not appear to support this view. The thermal inertia model of the urban interface ignores urban canopy structure and composition. Specifically the hollow structure of buildings reduces the thermal mass and thus the apparent thermal inertia of these structures compared with pavements. Numerical modeling results of the thermal behavior of a two-layer interface and aircraft far-infrared remote sensor observations of urban landscapes demonstrate the differential thermal behavior of buildings versus pavements. Accounting for the structure and configuration of urban canopies explains observed urban landscape thermal behavior and should assist in explaining the urban heat island phenomenon.     

Riparian vegetation life stages control the impact of flood sequencing on braided river morphodynamics

With riverine flooding set to be more frequent in many parts of the world as a result of climate change, the interactions between fluvial morphodynamics and riparian vegetation may depend in part on the sequence of flood events. This paper describes a laboratory study of the geomorphic adjustment of a braided river to sequences of floods across five different strengths of braidplain vegetation. By using alfalfa as a proxy for braidplain vegetation, the differing plant life stages were used to represent the varying strengths of biogeomorphic feedbacks across the floods. Boundary conditions were constrained by sets of experimental runs with both equilibrium sediment loads and deficit loads. Changes in bed topography were monitored and assessed using a detailed digital elevation model, digital imagery and continuous monitoring of the transported sediment. Results demonstrate that in absence of plant colonization, vegetation placed the rivers in a non-equilibrium condition, in which riparian vegetation encouraged the development of new channels, increased the system channel width and enhanced topographic irregularity, these effects being more noticeable during the low-flow periods. The morphodynamics was found to be less sensitive to variations in flood discharges as the vegetation influence (strength) increased from minimum to maximum, until vegetation began to die back and the impacts of flood sequences became yet again evident. Although the overall sediment transport rate was reduced under full-grown vegetation conditions, the presence of the mature plants across the braid bars resulted in the greatest channel scour depths. Results are considered in light of expected changes in flood frequency with climate and likely morphodynamic responses of river systems as a result.     

Geomorphic Controls of Spatial Pattern and Process at Alpine Treeline*

This study examines the role of surface geomorphic features in tree establishment at the alpine treeline in Glacier National Park, Montana, through the presentation of a multiscale, conceptual model of biogeomorphic relationships at alpine treeline. Empirical observations gathered through a multiscale field methodology over three summers serve as a base for the model. The model highlights the importance of surface geomorphic features, specifically boulders and terrace risers, in creating favorable local site conditions, largely by protecting seedlings from wind. The sheltering effect of surface features enables initial seedling establishment, and in some cases survival, above current treeline locations, thereby initiating a positive feedback effect that encourages subsequent tree establishment. Geomorphic features are therefore important in linking scales of pattern and process at the alpine treeline ecotone.     

Channel and vegetation recovery from dredging of a large river in the Gulf coastal plain,USA

Anthropogenic impacts in large rivers are widely studied, but studies of recovery once a disturbance has stopped are uncommon. This study examines the biogeomorphic recovery of a 40-km river corridor on the mid-Apalachicola River, Florida following the cessation of dredging, disposal, and snag removal in 2002. This failed navigation project resulted in vegetation losses (~166 ha between 1941 and 2004), river widening, and increased point bar areas. We used paired sets of imagery for a 10-year period during the recovery process at two different flow levels to assess sand bar change, land cover change, and their spatial variations. Most large sand bars decreased significantly in area due to growth of pioneer species, typically from the bankside of the bar. Mean bar area shrank 0.17 and 0.20 ha for the 30th and 1st percentile flows, respectively. For the entire study area, both water-level comparisons showed gains in vegetation (23.36 and 15.83 ha), compensated by losses in the extent of water (16.83 and 8.55 ha) and sand bar losses (6.53 and 7.28 ha). Overall, these gains during the 10-year passive recovery period are equivalent to ~15% of the vegetation losses that resulted from the navigational dredging. As found in other studies, most of the pioneer vegetation grew approximately 2 m relative elevation above the low-water surface. The initial length of the tree line and the area of herbaceous growth both had a significant and positive relationship with the area of new vegetation growth over the study interval. As parts of the river are healing, reduced channel capacity from narrowing and tree growth will benefit the floodplain. As elsewhere, understanding of a river's biogeomorphology, hydrology, and disturbance history can help in selecting appropriate recovery metrics to further advance the understanding and management of disturbed floodplains. © 2020 John Wiley & Sons, Ltd.     

Formation and dynamics of vegetated fluvial landforms follow the biogeomorphological succession model in a channelized river

Feedback between hydrogeomorphological processes and riparian plants drives landscape dynamics and vegetation succession in river corridors. We describe the consequences of biogeomorphological feedback on the formation and dynamics of vegetated fluvial landforms based on observations from the channelized Isère River in France. The channel was laterally confined with embankments and mostly straightened. From the beginning of the 1970s to the end of the 1990s, alternate bars were progressively but heavily colonized by vegetation. This context presented an exceptional opportunity to analyse temporal adjustments between fluvial landforms and vegetation succession from bare gravel bars to mature upland forest as the consequence of biogeomorphological interactions. Based on a GIS analysis of aerial photographs (between 1948 and 1996), we show that the spatiotemporal organization of vegetated bars within the river channel observed in 1996 resulted from a bioconstruction and biostabilization effect of vegetation and interactions between bars of varying age, size and mobility. Field measurements in 1996 reflected how a strong positive feedback between sedimentary dynamics and riparian vegetation succession resulted in the construction of the vegetated bars. A highly significant statistical association of geomorphological and vegetation variables (RV of co-inertia analysis = 0.41, p < 0.001) explained 95% of the variability in just one axis, supporting the existence of very strong feedback between geomorphological changes (i.e. the transformation of small bare alternate bars to fluvial landforms covered by mature upland forest, and vegetation succession). Such dynamics reflect the fluvial biogeomorphological successions model, as described by the authors earlier. © 2020 John Wiley & Sons, Ltd.     

Biogeomorphology in the marine landscape: Modelling the feedbacks between patches of the polychaete worm Lanice conchilega and tidal sand waves

Tidal sand waves are dynamic bedforms found in coastal shelf seas. Moreover, these areas are inhabited by numerous benthic species, of which the spatial distribution is linked to the morphological structure of sand waves. In particular, the tube-building worm Lanice conchilegais of interest as this organism forms small mounds on the seabed, which provide shelter to other organisms. We investigate how the interactions between small-scale mounds (height ∼dm) and large-scale sand waves (height ∼m) shape the bed of the marine environment. To this end, we present a two-way coupled process-based model of sand waves and tube-building worm patches in Delft3D. The population density evolves according to a general law of logistic growth, with the bed shear stress controlling the carrying capacity. Worm patches are randomly seeded and the tubes are mimicked by small cylinders that influence flow and turbulence, thereby altering sediment dynamics. Model results relate the patches with the highest worm densities to the sand wave troughs, which qualitatively agrees with field observations. Furthermore, the L. conchilegatubes trigger the formation of sandy mounds on the seabed. Because of the population density distribution, the mounds in the troughs can be several centimetres higher than on the crests. Regarding sand wave morphology, the combination of patches and mounds are found to shorten the time-to-equilibrium. Also, if the initial bed comprised small sinusoidal sand waves, the equilibrium wave height decreased with a few decimetres compared to the situation without worm patches. As the timescale of mound formation (years) is shorter than that of sand wave evolution (decades), the mounds induce (and accelerate) sand wave growth on a similar spatial scale to the mounds. Initially, this leads to shorter sand waves than they would be in an abiotic environment. However, near equilibrium the wavelengths tend towards their abiotic counterparts again. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd