Landsat5图像的增益、偏置取值及其对行星反射率计算分析

在对比不同时相的数据或建立遥感反演模型时,往往需要将图像的灰度值转换为反射率。增益和偏置是计算反射率时使用的两个基本参数。如果这两个参数发生偏差,反射率的计算结果就有问题,大气校正和其他相关工作的结果也是不可靠的。根据USGS文档和1995年以来的Landsat5遥感图像,对图像头文件中的增益和偏置参数的取值进行了分析,并按照标准单位将增益和偏置进行了转换。为了分析不同增益和偏置取值对反射率计算结果的影响,对比计算了植被和水体的行星反射率值。对2004年7月26日的太湖地区的TM图像。取值分为4种方案: (1)使用遥感软件ENV14．0计算;(2)使用图像头文件中的参数;(3)使用USGS提供的同期参数;(4)使用USGS提供的2003年前的参数。结果表明,不同增益和偏置取值导致计算结果变化较大。如果以方案3的USGS参数计算的结果为标准,那么,其他方案的相对误差值可从0．2％到20％以上。从各个波段的误差分布看,以第3波段的相对误差最小。从工作成果的可比性角度出发,建议统一使用USGS的增益和偏置参数计算Landsat5图像的反射率。     

北斗卫星类型间偏差快速改正分析

针对北斗卫星类型间偏差（ISTB）导致载波相位差分高精度定位（RTK）的整周模糊度无法固定问题,本文提出了改进ISTB快速改正方法,在观测量层面仅利用1组不同卫星类型的载波相位差分观测量即可实现ISTB估计与改正,实际应用中较传统方法更具普适性与简易性。该方法的测试结果表明,ISTB值由NH码调制不同引起,不同频点的ISTB值具有不一致性;此外,有无改正ISTB的北斗RTK性能对比反映了ISTB会严重降低整周模糊度固定与RTK定位性能。由此可知,本文方法能够保障现阶段北斗接收机更新换代过程中北斗RTK的高精度与高可靠性能。     

基于核函数NPSSB模型的HY-2A卫星雷达高度计海况偏差研究

利用机器学习的方法,对14个周期HY-2A卫星高度计数据:风速、有效波高和海面高度差值进行训练,探究海况偏差和风速、有效波高之间的关系,创建海况偏差核函数非参数模型(NPSSB),并与参数模型中具有代表性的BM3、BM4模型进行对比。研究表明:(1)核函数NPSSB模型能够很好的反映SSB与U、SWH之间的关系,SSB与U呈二次函数关系,SSB与SWH呈反比例函数关系;(2)核函数NPSSB模型对SSB的模拟能力与训练数据集相关,数据量越多,模拟能力越好;(3)核函数NPSSB模型与BM3、BM4模型都存在0^-0.03 m的差值,随着风速和有效波高的增加,差值的绝对值越大。     

GNSS长度测量不确定性试验分析

针对GNSS定位结果总是存在点位误差,由此导出的长度测量值为点位误差的非线性映射,对于长距离定位量测,其非线性影响较小,线性化近似一般可以满足精度要求,但对于短距离量测,其非线性影响不容忽略的问题。该文探讨了GNSS长度测量不确定性来源,通过单点定位和差分定位试验验证了长度测量不确定性与定位精度、点间距离的关系,测试不同偏差和方差估计公式的适用性。试验表明,对于GNSS高精度、长基线测量,其长度统计偏差可以忽略,且方差为基线向量的方向方差;现有不确定性评估公式在超短基线情形适用性会变差,在这种情形下,试验表明二阶偏差和方差估计更为精确。通过消除长度统计偏差得到无偏估计量,可以有效提高距离量测的可靠性,为提高用户距离量测精度提供有益帮助。     

GNSS接收机DCB短期时变特征分析和估计方法

提出一种使用非差非组合精密单点定位(PPP)估计和分析接收机DCB短时时变特征的方法。首先利用非差非组合PPP得到包含接收机DCB的重构电离层参数估值;然后通过IGS电离层GIMs格网模型内插剥离各历元站星斜向电离层距离延迟;最后通过最小二乘约束得到各历元接收机DCB解。由于格网本身精度(2~8 TECU)和插值精度限制,解算出来的接收机DCB并不能真实反映其短期时变特征。为此,提出利用站间单差或者历元间差分的方法还原其真实的变化态势。实验结果表明,所提出的方法能够正确估计接收机DCB,并能真实还原其短期时变特征,具有良好的适用性。     

Urban planning construction land standard and its revision based on climate and topography in China

Urban planning construction land standard is the technical specification for scientifically allocating various types of urban construction land, and it is the basis for drawing up and revising the overall urban planning scheme. Considering China's current urban planning construction land standard, many problems exist, such as the gap in the land use control threshold, the lack of regional differences in the climate revision, and failing to consider the topographic factors. To resolve these problems, this study proposed a step-by-step process framework and quantitative calculation method for the establishment and revision of standards in accordance with the principle of Total-Structure control. By setting the conditions, a universal basic standard for construction land was established. Quantitative analysis was then conducted on the relationship between the basic standard and the selected key indicators, such as urban population size, sunshine spacing coefficient, the width of river valleys or inter-montane basins, and terrain slope, among others. Finally, revised standards were formed for climate conditions, topography, and geomorphologic conditions, which were matched with the basic standards. The key results are three-fold:(1) The per capita construction land standard of 95 m~2/person can be used as the total indicator of China's urban planning basic standard, and the corresponding per capita single construction land comprises 32.50% of residential land, 7.42% of public management and public service land, 22.50% of industrial land, 17.50% of transportation facilities, 12.50% of green space, and 7.58% of other land-use types. The results of the revision of the urban population size indicate that the difference in population size has little effect on the total amount of per capita construction land.(2) The climate revision results of per capita residential land and per capita construction land in major cities reveal that the revised climate value varies greatly between north and south China. The revised climate values of the per capita area of construction land vary by latitude as follows: the value at 20°N is 93 m~2/person, the value at 30°N is 97 m~2/person, the value at 40°N is 103 m~2/person, and the value at 50°N is 115 m~2/person. The basic standard land value of 95 m~2/person is generally distributed across the Xiamen-Guilin-Kunming line.(3) The cities located in mountainous areas, hilly valleys, or inter-montane basins can reduce the allocation of community parks and comprehensive parks when the average width of an existing river valley or inter-montane basin is less than 2 km. When the average width of the valley or inter-montane basin is between 2 km to 4 km, the allocation of the comprehensive parks can be reduced. The revised results of per capita sloping construction land reveal that the terrain slope greatly affects the revised value of per capita construction land. Specifically, the revised value at 3° is 3.68% higher than the basic standard value, and the increase rates at 8°, 15°, and 25° are 11.25%, 26.49%, and 68.47%, respectively.     

精密单点定位中三种GPS卫星钟差预报模型的精度分析

分析了二次多项式、线性和灰色系统三种预报模型的原理和特点,采用了IGS精密星历和超快星历数据,选取了五颗钟差变化比较典型的卫星,实现了为期一天的卫星钟差预报。     

Impacts of systematic precipitation bias on simulations of water and energy balances in Northwest America

At high latitudes and in mountainous areas, evaluation and validation of water and energy flux simu-lations are greatly affected by systematic precipitation errors. These errors mainly come from topographic effects and undercatch of precipitation gauges. In this study, the Land Dynamics （LAD） land surface model is used to investigate impacts of systematic precipitation bias from topography and wind-blowing on water and energy flux simulation in Northwest America. The results show that topographic and wind adjustment reduced bias of streamflow simulations when compared with observed streamflow at 14 basins. These systematic biases resulted in a -50%-100% bias for runoff simulations, a -20%-20% bias for evapotranspiration, and a -40%-40% bias for sensible heat flux, subject to different locations and adjustments, when compared with the control run. Uncertain gauge adjustment leads to a 25% uncertainty for precipitation, a 20% 100% uncertainty for runoff simulation, a less-than-10% uncertainty for evapotranspiration, and a less-than-20% uncertainty for sensible heat flux.     

Study on the negative bias temperature instability effect under dynamic stress

This paper studies negative bias temperature instability (NBTI) under alternant and alternating current (AC) stress. Under alternant stress, the degradation smaller than that of single negative stress is obtained. The smaller degradation is resulted from the recovery of positive stress. There are two reasons for the recovery. One is the passivation of H dangling bonds, and another is the detrapping of charges trapped in the oxide. Under different frequencies of AC stress, the parameters all show regular degradation, and also smaller than that of the direct current stress. The higher the frequency is, the smaller the degradation becomes. As the negative stress time is too small under higher frequency, the deeper defects are hard to be filled in. Therefore, the detrapping of oxide charges is easy to occur under positive bias and the degradation is smaller with higher frequency.     

NEX-GDDP和CMIP5对青藏高原地区近地面气象场历史和未来模拟的评估与偏差校正

青藏高原是全球变化研究的热点区域,气候模式模拟是研究该区域气候变化的重要数据来源.本文使用基于中国地面台站的插值格点数据集(CN05.1),对国际气候耦合模式第5次比较计划(CMIP5)及其高分辨率统计降尺度数据集(NEX-GDDP)中15个模式1966-2005年间的逐日最高/最低气温、降水和平均风速在青藏高原区域的...