Simulating coseismic deformation of quartz in the middle crust and fabric evolution during postseismic stress relaxation — An experimental study

Non-steady state deformation and annealing experiments on vein quartz are designed to simulate earthquake-driven episodic deformation in the middle crust. Three types of experiments were carried out using a modified Griggs-type solid medium deformation apparatus. All three start with high stress deformation at a temperature of 400 °C and a constant strain rate of 10^− 4 s^− 1 (type A), some are followed by annealing in the stability field of α-quartz for 14–15 h at zero nominal differential stress and temperatures of 800–1000 °C (type A + B), or by annealing for 15 h at 900 °C and at a residual stress (type A + C).The quartz samples reveal a very high strength > 2 GPa at a few percent of permanent strain. The microstructures after short-term high stress deformation (type A) record localized brittle and plastic deformation. Statisc annealing (type A + B) results in recrystallisation restricted to the highly damaged zones. The new grains aligned in strings and without crystallographic preferred orientation, indicate nucleation and growth. Annealing at non-hydrostatic conditions (type A + C) results in shear zones that also develop from deformation bands or cracks that formed during the preceding high stress deformation. In this case, however, the recrystallised zone is several grain diameters wide, the grains are elongate, and a marked crystallographic preferred orientation indicates flow by dislocation creep with dynamic recrystallisation. Quartz microstructures identical to those produced in type A + B experiments are observed in cores recovered from Long Valley Exploratory Well in the Quaternary Long Valley Caldera, California, with considerable seismic activity.The experiments demonstrate the behaviour of quartz at coseismic loading (type A) and subsequent static annealing (type A + B) or creep at decaying stress (type A + C) in the middle crust. The experimentally produced microfabrics allow to identify similar processes and conditions in exhumed rocks.     

Nonlinear influences on ocean waves observed by X-band radar

The purpose of this study is to discuss the influence of signal nonlinearity upon X-band radar observations. A method for estimating the degree of nonlinearity by bispectral analysis was applied and discussed. We found that bispectral analyses from spatial radar backscatter series are similar to results obtained from water level time series. In addition, the average nonlinear degree from radar backscatter is related to wind speed. The accuracy of wave observations derived by consideration of the nonlinear effect from radar backscatter was also investigated. The estimated error in wave height from the radar data is also related to the degree of nonlinearity. In order to improve accuracy, the modulation transfer function method was applied in order to eliminate the influence of nonlinearity.     

多波束声参数在海底热液区底质分类中的应用——以东太平洋海隆“宝石山”热液区为例

多波束声纳底质分类可以高效且全覆盖地认识海底底质类型及其分布特征。应用Simrad EM120多波束声纳对东太平洋海隆附近的"宝石山"热液区进行底质分类,一方面可以研究多波束声参数在深水热液区进行底质分类的效果,挖掘多波束声纳在海底底质分类方面的应用潜力;另一方面,通过研究热液区的底质取样、摄像以及多波束声纳资料,建立综合分析热液区底质的模式,获得热液区的底质类型及其分布特征。通过提取与底质属性相关的声纳回波反向散射强度数据,形成"宝石山"热液区的声纳图像,并结合该区域的取样与海底摄像资料,综合分析该热液区的底质类型及其分布特征,结果表明,沉积物在该热液区的喷口西侧广泛分布,在喷口周围主要是基岩与砾石的混杂底质。     

1987年9月23日日环食的电离层波动现象

本文给出了利用高频天波返回散射雷达对1987年9月23日日环食电离层效应的观测结果.分析表明,日食期间在日环食带电离层存在明显的不均匀结构和小尺度的波动,而日食过后在见食电离层区域出现大尺度的波动现象.     

Crystallographic orientations of high-angle grain boundaries in dynamically recrystallized quartz: First results

The crystallography and geometry of high-angle grain boundaries from dynamically recrystallized quartz have been studied. On the basis of combined electron backscatter diffraction and universal stage measurements, the complete crystallographic orientation of the grain boundaries could be calculated. The u-stage rotation of the grain boundaries to a vertical position reveals that they are never curved but always consist of straight segments. Our results show that these segments preferentially occupy rhombohedral, trapezohedral and bipyramidal orientations, i.e., orientations in a  25–50° girdle to the c-axis. A specific, albeit low, number of segments with special crystallographic orientation, with respect to a neighbouring quartz grain, often shows another special orientation with respect to the other neighbouring grain. Preferred combinations of grain boundary orientations related to both neighbouring grains are (i) low-index rhombohedral and high index trapezohedral, (ii) low-index bipyramidal and low-index trapezohedral or high-index rhombohedral, and (iii) low-index trapezohedral and low or high index trapezohedral. In certain cases, such as at triple junctions, the boundaries occupy specific trapezohedral orientations with a constant angle to the c-axis. This argues for energy isotropy of trapezohedral planes with the same angle to the quartz c-axis. In general, good match coincidence site lattice (CSL) orientations are not preferentially occupied so that most of the studied grain boundaries represent general boundaries. The formation of straight segments in special crystallographic orientations indicates the crystallographic control and implies an energy reduction of certain general boundaries.     

Microstructural, chemical and textural records during growth of snowball garnet

The growth history of two populations of snowball garnet from the Lukmanier Pass area (central Swiss Alps) was examined through a detailed analysis of three-dimensional geometry, chemical zoning and crystallographic orientation. The first population, collected in the hinge of a chevron-type fold, shows an apparent rotation of 360°. The first 270° are characterized by spiral-shaped inclusion trails, gradual and concentric Mn zoning and a single crystallographic orientation, whereas in the last 90°, crenulated inclusion trails and secondary Mn maxima centred on distinct crystallographic garnet domains are observed. Microstructural, geochemical and textural data indicate a radical change in growth regime between the two growth sequences. In the first 270°, growth occurred under rotational non-coaxial flow, whereas in the last 90°, garnet grew under a non-rotational shortening regime. The second population, collected in the limb of the same chevron-type fold structure, is characterized by a spiral geometry that does not exceed 270° of apparent rotation. These garnet microstructures do not record any evidence for a modification of the stress field during garnet growth. Concentric Mn zoning as well as a single crystallographic orientation are observed for the entire spiral. Electron backscatter diffraction data indicate that nearly all central domains in the snowball garnet are characterized by one [001] axis oriented (sub-)parallel to the symmetry axis and by another [001] axis oriented (sub-)parallel to the orientation of the internal foliation. These features suggest that the crystallographic orientation across the garnet spiral is not random and that a relation exists among the symmetry axis, the internal foliation and the crystallographic orientation.     

The effect of bedform dynamics on computing suspended sediment fluxes using optical backscatter sensors and current meters

The sensitivity of the suspended sediment flux is tested with respect to rapid changes in bed-level across the surf zone of a sandy beach. The suspended flux was computed using a fixed instrument array, but bed-level changes due to ripple migration caused the instrument elevations to be significantly changed during the course of the experiment. The nominal elevations of the instruments were adjusted during data processing (using the MOBS array) to maintain a fixed elevation with respect to bed-level changes. The resultant suspended sediment concentrations and fluxes were significantly different from the unadjusted data, and for the present data set O(35%) less when averaged over the tide. The maximum difference between adjusted and unadjusted fluxes may be O(260%). The results indicate that changes in bed-level, particularly those due to bedform migration, must be accounted for when processing OBS data if reliable estimates of suspended sediment transport are to be obtained in the field.     

Seafloor Classification of Multibeam Sonar Data Using Neural Network Approach

In this study, the self-organizing map (SOM), which is an unsupervised clustering algorithm, and a supervised proportional learning vector quantization (PLVQ), are employed to develop a combined method of seafloor classification using multibeam sonar backscatter data. The PLVQ is a generalized learning vector quantization based on the proportional learning law (PLL). The proposed method was evaluated in an area where there are four types of sediments. The results show that the performance of the proposed method is better than the SOM and a statistical classification method.     

水稻时域散射特征分析及其应用研究

通过对肇庆试验区1996年和1997年获取的多时相、多模式雷达卫星（RADARSAT）数据分析,从图像上直接提取地物的后向散射系数,结合实地测量水稻的生长结构参数,建立了水稻生长模型,分析了不同生长周期（从80天到120－125天）4种类型水稻的时域散射特性。利用1997年4月至7月获取的7景标准模式雷达卫星数据,对试验区内三个县和两个行政区共5000km^2面积范围内的作物进行分类和水稻产量预估算,水稻类型分类及面积量算精度达91％。结果表明：利用雷达遥感数据进行水稻种植面积量算和估产需要水稻生长期间三个时相的数据,即插秧期、抽穗期、收割前期。若能够获得多参数雷达图像,可以用插秧期和收割前期的两个时相图像来代替上述的三个时相图像同样可以达到种植面积量算和估产的效果。这一结果充分说明多时相雷达卫星数据对我国南方水稻长势监测及估产具有明显优势和潜力。     

Dynamic recrystallization near the brittle-plastic transition in naturally and experimentally deformed quartz aggregates

The electron backscattering diffraction technique (EBSD) was used to analyze bulging recrystallization microstructures from naturally and experimentally deformed quartz aggregates, both of which are characterized by porphyroclasts with finely serrated grain boundaries and grain boundary bulges set in a matrix of very fine recrystallized grains. For the Tonale mylonites we investigated, a temperature range of 300–380 °C, 0.25 GPa confining pressure, a flow stress range of ~ 0.1–0.2 GPa, and a strain rate of ~ 10^− 13 s^− 1 were estimated. Experimental samples of Black Hills quartzite were analyzed, which had been deformed in axial compression at 700 °C, 1.2–1.5 GPa confining pressure, a flow stress of ~ 0.3–0.4 GPa, a strain rate of ~ 10^− 6 s^− 1, and to 44% to 73% axial shortening. Using orientation imaging we investigated the dynamic recrystallization microstructures and discuss which processes may contribute to their development. Our results suggest that several deformation processes are important for the dismantling of the porphyroclasts and the formation of recrystallized grains. Grain boundary bulges are not only formed by local grain boundary migration, but they also display a lattice misorientation indicative of subgrain rotation. Dynamic recrystallization affects especially the rims of host porphyroclasts with a hard orientation, i.e. with an orientation unsuitable for easy basal slip. In addition, Dauphiné twins within porphyroclasts are preferred sites for recrystallization. We interpret large misorientation angles in the experimental samples, which increase with increasing strain, as formed by the activity of fluid-assisted grain boundary sliding.