桩长及水泥掺入量对柔性桩承载力等的影响

采用弹性无限半空间体内的Mindlin应力解和分层总和法，计算分析了柔性桩的荷载传递规律，较详细地讨论了桩长、固化剂（水泥）掺入量对柔性桩复合地基承载力、变形的影响。计算值与实测值比较吻合。     

端头扩大型土层锚杆技术

锚固力是土锚重要的工作性指标，端头扩大型土层锚杆技术作为提高锚固力的一种有效手段虎来越得到人们的重视，为此，在这着重介绍国内外土层锚杆端头扩大技术的原理及应用发展情况。     

静力弹塑性分析(Pushover Analysis)的基本原理和计算实例

阐述了美国两本手册FEMA273／274和ATC-40中关于静力弹塑性分析的基本原理和方法，给出了利用ETABS程序进行适合我国地震烈度分析的计算步骤，并用一框剪结构示例予以说明，表明Pushover方法是目前对结构进行在罕遇地震作用下弹塑性分析的有效方法。     

Parameters of Land-Surface Processes for Gobi in North-West China

Using data from the intensive observation period (May–June 2000) of the NWC-ALIEX (The Field Experiment on Interaction between Land and Atmosphere in Arid Region of North-west China), the characteristics and mechanisms of some key land-surface process over Gobi in a typical arid region of north-west China are analyzed and several parameters of land-surface processes are calculated. The weighted mean of the surface albedo over a typical arid region of the Dunhuang Gobi is calculated using the relative reflection as a weighting factor, and its value is 0.255 ± 0.021. After removing the influence of precipitation, the mean soil heat capacity over a typical arid region of the Dunhuang Gobi is 1.12 × 10⁶ J m^-3 K^-1,which is smaller than that observed in the Heihe (China) River basin Field Experiment (HEIFE). The mean soil heat diffusivity and conductivity are about half of those observed in HEIFE.     

关于地基承载力的探讨

以土质地基为研究对象 ,结合载荷试验 p s曲线 ,应用土体的极限平衡理论 ,对地基土的变形性状、地基土承载力以及承载力修正等问题进行了分析。分析结果显示 :地基土承载力不单是地基土抗剪强度指标的函数 ,同时还与作用其上的基础埋深及基础宽度等因素密切相关。进行地基基础设计时 ,应根据实际的基础埋深与宽度对勘察资料中的地基土承载力进行修正 ,并提出了有关承载力修正的建议     

A new method for testing pile by sin- gle-impact energy and P-S curve

Introduction Through many year's practices by vast numbers of scientific and technological workers andefforts from all aspects, the dynamic testing method of high-low strain has formally entered intothe technical code of foundation pile test of construction at last (The Industry Standards of thePeople's Republic of China, 2003). The striking mode of the dynamic testing method of high strainis stipulated as hammer in the code, the striking of rocket can also be used. The latter is widely…     

Bearing capacity of rock over mined cavities in Nottingham

A significant geohazard is created in Nottingham, UK, by hundreds of man-made caves cut in the weak sandstone beneath the city centre. Stability of the caves has been assessed by a single full-scale loading test, by numerical modelling with FLAC and by physical modelling in plaster. For typical caves 4 m wide, bearing capacity of the rock roof rises from 2 MPa where it is 1 m thick to 8 MPa where 3 m thick. Stability decreases over wider caves and where the loading pad edge is over the edge of the cave. Numerical modelling of a very wide cave revealed the failure mechanisms and also showed that an internal support wall increased roof bearing capacity by 50%. Local building regulations that require 3-5 m of rock cover over the sandstone caves appear to be conservative. In stronger rocks, including karstic limestone, a guideline that cover thickness exceeds 70% of the cave width appears to be appropriate.     

The structural role of Ti in aluminosilicate liquids in the glass transition range: insights from heat capacity and shear viscosity measurements

The shear viscosities and 1 bar heat capacities of glasses and melts along the 67mol% silica isopleth in the system SiO₂-Al₂O₃-Na₂O-TiO₂ have been determined in the temperature ranges 780-1140 K and 305-1090 K respectively. Anomalous behaviour of both these properties is observed for compositions rich in TiO₂ and/or Al₂O₃, an observation attributed to liquid-liquid phase separation followed by anatase crystallization. For samples which do not show anomalous behaviour, it is found that the partial molar heat capacity of the TiO₂ component previously determined in Al-free compositions reproduces our heat capacities to within 1.3%. Viscosity data show that addition of TiO₂ tends to increase viscosity and melt fragility at constant temperature. Furthermore, heat capacity and viscosity data may be combined within the framework of the Adam-Gibbs theory to extract values of the configurational entropy of the liquids and qualitative estimates of the variation of the average energy barrier to viscous flow. Configurational entropy at 900K is inferred to decrease upon addition of TiO₂, in contrast to previous results from Al-free systems. The compositional limit separating normal from anomalous behaviour, as well as the data for homogenous melts have been used to constrain the structural role of Ti in these samples. Our data are consistent with a majority of Ti in five-fold coordination associated with a titanyl bond, in agreement with previous spectroscopic studies. Furthermore, we find no evidence for a Ti-Al interaction in our samples, and we are led to the conclusion that Al and Ti are incompletely mixed, a hypothesis consistent with the observed reduction of configurational entropy upon addition of TiO₂, suggesting an important role of medium range order in controlling the variations in thermodynamic properties.     

视电阻率观察中一种抗介质干扰的尝试

埋地金属管线对视电阻率的观测危害甚大。造成观测值大幅改变，跳动，无规律可循。严重时，甚至台站报废，被迫搬迁。通过一些突发事件的启发，结合现场实验，并引证了一些理论计算，笔者摸索出了只须对金属管道作局部微小的改造，就能基本克服其对观测的干扰的方法。该方法在红格台试验半年多来，取得了明显的效果。观测值恢复到安装的水管以前的水平，再无大幅度的跳动。该方法节约经费，简单易行，大大提高了台站在复杂环境中的生存能力。     

Dynamic theory of rigid-plasticity

This paper deals with an analysis method for the response and motion of soil-like rigid-plastic bodies under seismic loading conditions. A continuity condition to determine the acceleration distribution within the rigid-plastic body when the failure occurs during seismic motions is proposed. Combining this continuity condition of acceleration and the ‘Generalized Limit Equilibrium Method (GLEM)’, the responses of the earth structure during seismic motions as well as the permanent displacements can be obtained, where GLEM is one of the limit equilibrium methods proposed by the authors for static problems and providing the approximate solution for Kötter's equation. The theoretical formulation of the method, the illustrative examples, and some comparisons between the analytical and experimental results are demonstrated.