Physical mechanisms of man-made influences on the magnetosphere

Since the discovery of the Luxembourg effect in the 1930s, it is clear that man-made activities can perturb the ionosphere and the magnetosphere. The anthropogenic effects are mainly due to different kinds of waves coming from the Earth's surface. Acoustic-gravity waves are generated by large explosions, spacecraft launches, or flight of supersonic planes. Electromagnetic waves are active in different frequency ranges. Power line harmonic radiation which is radiated in the ELF range by electrical power systems can be observed over industrial areas. At VLF and HF, the ground-based transmitters used for communications or radio-navigation heat the ionosphere and change the natural parameters. A large variety of phenomena is observed: wave-particle interaction, precipitation of radiation belt electrons, parametric coupling of EM whistler waves, triggered emissions, frequency shift, and whistler spectrum broadening. This paper will review the different physical mechanisms which are relevant to such perturbations. The possibility of direct chemical pollution in the ionosphere due to gas releases is also discussed.     

气候变化对京津唐地区水资源及供需平衡的影响

根据大气环流模型(GCMs)输出的未来气候变化情景,结合历史资料的诊断分析,应用建立的流域水文模型及水资源利用综合评价模型,研究了气候变化对京津唐地区水资源数量和时空变化的影响。在地区未来经济发展及部门用水量预测的基础上,分析了气候变化对供水、需水和部门缺水的影响以及经济损失。     

THE IMPACT OF NOAA SATELLITE SOUNDING DATA ON THE SYSTEMATIC FORECAST ERROR OF B-MODEL

This paper is to examine the impact of satellite data on the systematic error of operational B-model in China.Em-phasis is put on the study of the impact of satellite sounding data on forecasts of the sea level pressure field and 500 hPaheight.The major findings are as follows.(1)The B-model usually underforecasts the strength of features in the sea level pressure(SLP)field,i.e.pressuresare too low near high pressure systems and too high near low pressure systems.(2)The nature of the systematic errors found in the 500 hPa height forecasts is not as clear cut as that of the SLPforecasts,but most often the same type of pattern is seen,i.e.,the heights in troughs are not low enough and those inridges are not high enough.(3)The use of satellite data in the B-model analysis/forecast system is found to have an impact upon the model'sforecast of SLP and 500 hPa height.Systematic errors in the vicinity of surface lows/500 hPa troughs over the oceansare usually found to be significantly reduced.A less conclusive mix of positive and negative impacts was found for allother types of features.     

环境影响评价中的效益—费用分析方法

效益-费用分析方法是环境影响评价中一种重要的方法。本文介绍了环境影响评价中的效益-费用分析方法的理论、程序及定量评价技术,概述了环境影响评价中效益-费用分析方法的理论及应用进展,并针对其存在问题,进行了探讨。     

Implementation of configuration dependent stiffness proportional damping for the dynamics of rigid multi-block systems

The distinct element method (DEM) has been used successfully for the dynamic analysis of rigid block systems. One of many difficulties associated with DEM is modeling of damping. In this paper, new procedures are proposed for the damping modeling and its numerical implementation in distinct element analysis of rigid multi-block systems. The stiffness proportional damping is constructed for the prescribed damping ratio, based on the non-zero fundamental frequency effective during the time interval while the boundary conditions remain essentially constant. At this time interval, the fundamental frequency can be estimated without complete eigenvalue analysis. The damping coefficients will vary while the damping ratio remains the same throughout the entire analysis. A new numerical procedure is developed to prevent unnecessary energy loss that can occur during the separation phases. These procedures were implemented in the development of the distinct element method for the dynamic analyses of piled multi-block systems. The analysis results for the single-block and two-block systems were in a good agreement with the analytic predictions. Applications to the seismic analyses of piled fourblock systems revealed that the new procedures can make a significant difference and may lead to much-improved results.     

Natural and artificial connections between atoll islets in the pacific,their process and environmental impact

Three types of natural connection between atoll islets are described. Causeway, as an artificial way of connecting islets, makes a connection to be completed in a few months. In this case shore adjustment becomes more vigorous than that in natural conditions, resulting in lagoon shore erosion. A causeway without short bridges or culverts should be built close to the lagoon shore to reduce lagoon shore erosion. A causeway-crossing channel assemblage is the worst type among all of the connection engineering constructions because the crossing channel traps sediment and further transports it out of the channel, resulting in long period coastal erosion. Reforming Nippon Causeway in Tarawa Atoll, Kiribati by simple means will stop sand loss, reduce shore erosion and greatly upgrade its stability.     

EROD activity, serum SDH and PAH biliary metabolites in sand flathead (Platycephalus bassensis) collected in Port Phillip Bay, Australia

In order to evaluate the health status of fish inhabiting Port Phillip Bay, Australia, southern sand flathead (Platycephalus hassensis, N = 133) were collected at six stations throughout the Bay. Fish had a similar serum sorbitol dehydrogenase (SDH) activity level (p = 0.12), indicating that they were not experiencing hepatocellular injuries. Ethoxyresorufin-O-deethylase (EROD) activity was generally lower in the non-urbanized and non-industrialized southern part of the Bay. The highest EROD activity was observed in Hobson Bay, the closest station from Melbourne city. Naphthalene-type biliary metabolites were also highest in Hobson Bay with intermediate levels found in Corio Bay where refineries are present. An opposite trend was observed with the pyrene-type bile metabolites, the highest levels being observed in Corio Bay while intermediate levels were found in Hobson Bay. The ratio of naphthalene-type to benzo(a)pyrene (B(a)P)-type metabolites indicate that relatively to other sites sampled in Port Phillip Bay, Corio Bay is subjected to enriched petroleum hydrocarbons of pyrolytic origin. Temporal trends indicate that the availability of xenobiotics to fish remained unchanged over the 1990s.     

Measurement of Impact Ejecta from Regolith Targets in Oblique Impacts

This paper reports the results of experiments on projectile impact into regolith targets at various impact angles. Copper projectiles of 240 mg are accelerated to 197 to 272 m s⁻¹ using an electromagnetic gun. The ejecta are detected by thin Al foil targets as secondary targets, and the resulting holes on the foil are measured to derive the spatial distribution of the ejecta. The ejecta that penetrated the foil are concentrated toward the downrange azimuths of impacting projectiles in oblique impacts. In order to investigate the ejecta velocity distribution, the nondimensional volume of ejecta with velocities higher than a given value is calculated from the spatial distribution. In the case of the vertical impact of the projectile, most ejecta have velocities lower than 24% of the projectile speed (∼50 m s⁻¹), and there are only several ejecta with velocities higher than 72 m s⁻¹. This result confirms the existence of an upper limit to the ejection velocity in the ejecta velocity distribution (Hartmann cutoff velocity) (W. K. Hartmann, 1985, Icarus63, 69-98). On the other hand, it is found that, in the oblique impacts, there are a large number of ejecta with velocities higher than the Hartmann cutoff velocity. The relative quantity of ejecta above the Hartmann cutoff velocity increases as the projectile impact angle decreases. Taking these results with the results of S. Yamamoto and A. M. Nakamura (1997, Icarus128, 160-170) from impact experiments using an impact angle of 30°, it can be concluded that the ejecta from these regolith targets exhibit a bimodal velocity distribution. Below a few tens of m s⁻¹, we see the expected velocity distribution of ejecta, but above this velocity we see a separate group of high-velocity ejecta.     

Model study of the relationship between sediment yield and river basin area

The SHETRAN physically based, spatially distributed model is used to investigate the scaling relationship linking specific sediment yield to river basin area, for two contrasting topographies of upland and more homogeneous terrain and as a function of sediment source, land use and rainfall distribution. Modelling enables the effects of the controls to be examined on a systematic basis, while avoiding the difficulties associated with the use of field data (which include limited data, lack of measurements for nested basins and inability to isolate the effects of individual controls). Conventionally sediment yield is held to decrease as basin area increases, as the river network becomes more remote from the headwater sediment sources (an inverse relationship). However, recent studies have reported the opposite variation, depending on the river basin characteristics. The simulation results are consistent with these studies. If the sediment is supplied solely from hillslope erosion (no channel bank erosion) then, with uniform land use, sediment yield either decreases or is constant as area increases. The downstream decrease is accentuated if rainfall (and thence erosion) is higher in the headwaters than at lower elevations. Introducing a non‐uniform land use (e.g. forest at higher elevations, wheat at lower elevations) can reverse the trend, so that sediment yield increases downstream. If the sediment is supplied solely from bank erosion (no hillslope erosion), the sediment yield increases downstream for all conditions. The sediment yield/basin area relationship can thus be inverse or direct, depending on basin characteristics. There still remains, therefore, considerable scope for defining a universal scaling law for sediment yield. Copyright © 2006 John Wiley & Sons, Ltd.     

挤密法处理湿陷性黄土效果影响因素分析与控制

本文就影响挤密处理效果的因素如场地含水量、桩体材料含水量、击实功、施工工艺等进行综合分析与研究,提出施工质量控制建议,以保证处理效果的有效性和处理方案的合理性与经济性。