国外有关海气系统年代际变率的机制研究

对近期国外有关年代际变率机制的诊断和模拟研究作了综合评述 ,着重介绍形成年代际变率的 5种主要机制 ,即热带海洋的强迫作用、中纬度的海气相互作用、温盐环流的作用、热带—中纬度的相互作用、海气之间的随机强迫作用机制 ,并简单阐述了作者的有关看法     

中国省际入境旅游客源市场结构与互动格局——基于2-模网络分析

入境旅游市场的整体格局与特征是制定入境旅游发展战略的重要依据。本文基于2-模网络分析建立了中国省际入境旅游客源国市场隶属网络,采用中心度和奇异值分解法进行分析,从O-D互动视角审视各省(市、区)在全国入境旅游客源市场整体结构中的功能和作用,分析省份—客源国、省(市、区)之间的互动格局。结果表明：①从各省(市、区)来看,入境游客规模优势并未带来相应的客源市场互动结构优势,通过与核心客源市场建立普遍的市场联系,使各省(市、区)的中心度得分较为一致;另一方面,韩、日、美等客源大国则成为隶属网络中的结构核心,成为连接不同省(市、区)的关键角色。②入境旅游客源国市场互动结构中存在3个特定的市场组团,即亚欧+多区域均衡组团、俄罗斯+南北联动组团、欧美+口岸—内地中转组团,这成为遴选市场开拓对象和合作省份的重要依据。本文相关结论可为各省(市、区)优化入境旅游客源国市场营销组合、组织旅游产品等提供借鉴。     

Two-phase Material Point Method applied to the study of cone penetration

This paper presents numerical simulations of Cone Penetration Test (CPT) in water-saturated soft soils taking into account pore pressure dissipation during installation. Besides modelling interaction between soil skeleton and pore fluid, the problem involves large soil deformations in the vicinity of the penetrometer, soil–structure interaction, and complex non-linear response of soil. This makes such simulations challenging. Depending on the soil’s permeability and compressibility, undrained, partially drained or drained conditions might occur. Partially drained conditions are commonly encountered in soils such as silts and sand–clay mixtures. However, this is often neglected in CPT interpretation, which may lead to inaccurate estimates of soil properties. This paper aims at improving the understanding of the penetration process in different drainage conditions through advanced numerical analyses. A two-phase Material Point Method is applied to simulate large soil deformations and generation and dissipation of excess pore pressures during penetration. The constitutive behaviour of soil is modelled with the Modified Cam Clay model. Numerical results are compared with experimental data showing good agreement.     

Response of rigid piles during passive dragging

This paper develops a three‐layer model and elastic solutions to capture nonlinear response of rigid, passive piles in sliding soil. Elastic solutions are obtained for an equivalent force per unit length p_s of the soil movement. They are repeated for a series of linearly increasing p_s (with depth) to yield the nonlinear response. The parameters underpinning the model are determined against pertinent numerical solutions and model tests on passive free‐head and capped piles. The solutions are presented in non‐dimensional charts and elaborated through three examples. The study reveals the following:

• On‐pile pressure in rotationally restrained, sliding layer reduces by a factor α, which resembles the p‐multiplier for a laterally loaded, capped pile, but for its increase with vertical loading (embankment surcharge), and stiffness of underlying stiff layer: α = 0.25 and 0.6 for a shallow, translating and rotating piles, respectively; α = 0.33–0.5 and 0.8–1.3 for a slide overlying a stiff layer concerning a uniform and a linearly increasing pressure, respectively; and α = 0.5–0.72 for moving clay under embankment loading.
• Ultimate state is well defined using the ratio of passive earth pressure coefficient over that of active earth pressure. The subgrade modulus for a large soil movement may be scaled from model tests.
• The normalised rotational stiffness is equal to 0.1–0.15 for the capped piles, which increases the pile displacement with depth.

The three‐layer model solutions well predict nonlinear response of capped piles subjected to passive loading, which may be used for pertinent design. Copyright © 2016 John Wiley & Sons, Ltd.     

Microstructures and their implications for faulting processes –Insights from DGLab core samples from the Gulf of Corinth

We have examined microstructures, mineralogical composition, geochemical alteration, and texture of four selected fault rock samples from the Deep Geodynamical Laboratory (DGLab) Gulf of Corinth project using optical microscopy, cathodoluminescence microscopy (CL), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and synchrotron X-ray diffraction measurements. The fault core is composed of red and gray clayey gouge material and surrounded by a damage zone of brecciated limestones. Pressure solution features, calcite veins and calcite clasts in the breccia and gouge material attest the presence of paleo-fluids and fluid-driven mass transfer during deformation. Differences in CL-colors between the matrix and calcite vein cement and inside the vein cement suggest repeated infiltration of fluids with different composition from various sources (formation water and meteoric water). Twin lamellae densities estimated in calcite veins are used as paleo-piezometer. The deduced differential stress is ∼140 ± 70 MPa for the older vein generation and appears to be higher than stress for the youngest veins (45 ± 23 MPa). In spite of the relatively small clay content in both samples, newly formed clay minerals have been observed in gray as well as red clayey gouge material. Differences between gray and red clay gouge material are found in fault rock composition, porosity and clay fabric. The proportion of chlorite in the red gouge is significantly less than that in the gray gouge whereas the initial porosity is significantly higher than in the gray gouge material. The detection of a well-oriented clay fabric in red clay gouge samples is unique in comparison to other major fault zones.     

How does shear zone nucleate? An example from the Suretta nappe (Swiss Eastern Alps)

In order to address the question of the processes involved during shear zone nucleation, we present a petro-structural analysis of millimetre-scale shear zones within the Roffna rhyolite (Suretta nappe, Eastern central Alps). Field and microscopic evidences show that ductile deformation is localized along discrete fractures that represent the initial stage of shear zone nucleation. During incipient brittle deformation, a syn-kinematic metamorphic assemblage of white mica + biotite + epidote + quartz precipitated at ca. 8.5 ± 1 kbar and 480 ± 50 °C that represent the metamorphic peak conditions of the nappe stacking in the continental accretionary wedge during Tertiary Alpine subduction. The brittle to ductile transition is characterized by the formation of two types of small quartz grains. The Qtz-IIa type is produced by sub-grain rotation. The Qtz-IIb type has a distinct CPO such that the orientation of c-axis is perpendicular to the shear fracture and basal and rhombhoedric slip systems are activated. These Qtz-IIb grains can either be formed by recrystallization of Qtz-IIa or by precipitation from a fluid phase. The shear zone widening stage is characterized by a switch to diffusion creep and grain boundary sliding deformation mechanisms. During the progressive evolution from brittle nucleation to ductile widening of the shear zone, fluid–rock interactions play a critical role, through chemical mass-transfer, metasomatic reactions and switch in deformation mechanisms.     

滇西石鼓杂岩南部早白垩世以来剥露隆升的锆石和磷灰石裂变径迹证据

石鼓杂岩位于青藏高原东南缘经历了多期变质变形作用叠加。为了揭示杂岩体的低温热演化与浅部剥露历史,采集了石鼓杂岩南段石鼓镇-拉巴支村剖面变质岩中的锆石和磷灰石,开展裂变径迹分析。结果表明,石鼓杂岩从早白垩世(133~145Ma)到渐新世(31Ma)经历了一次缓慢的剥露(1.08℃/Ma),而从渐新世开始,其南部经历了较快速的剥露过程(3.23℃/Ma)。磷灰石热史模拟也反映出第二阶段较为快速的冷却过程。结合区域构造分析认为,拉萨与羌塘板块碰撞的远程效应影响早白垩世以来藏东地区地壳结构的调整,导致石鼓杂岩南部出现了第一阶段的剥露作用;而印度与欧亚板块碰撞与后碰撞过程对于石鼓杂岩的新生代剥露具有重要影响。     

Review of Development and Application of High Resolution Global Climate System Model

Climate models have been used as an important tool to quantitatively study climate variability and to predict or project climate change in the future. One of the most important pathways for development and improvement of climate system model is to increase the spatial resolution and improve the corresponding physical parameterization schemes, which is very important for understanding climate change and improving climate prediction skill. Based on a brief introduction of the importance of developing high-resolution global climate system model, a review of recent progresses in the development and application of high-resolution models was summarized. The paper also introduced the current situation and problems for the development and evaluation of high-resolution models and focused on the key scientific and technical bottlenecks which restrict the development of high-resolution models, including the development of dynamic framework of the high-resolution ocean and atmospheric models and massive high performance parallel computing, the improvement of the sub-grid physical parameterization scheme, and mesoscale air-sea interaction. Meanwhile, the scientific objects and experiments design of the international high resolution climate model intercomparison project (HiResMIP) of the coupled model intercomparison project phase 6 (CMIP6) was introduced. Finally, we prospect the future developments and evaluations of high-resolution climate models in China was proposed.     

对虾传染性皮下及造血组织坏死病毒编码蛋白的相互作用研究

采用Matchmaker酵母双杂交系统,将对虾传染性皮下及造血组织坏死病毒(Infection hypodermal and hematopoietic necrosis virus,IHHNV)编码蛋白NS1、NS2和CP序列分别构建到酵母猎物载体p GADT7和诱饵载体p GBKT7上,分别转化至酵母AH109以检测重组猎物载体和诱饵载体的自激活作用及对宿主的毒性作用,发现无自激活作用和毒性作用,随后将重组猎物载体和诱饵载体两两共转至酵母AH109中,涂布于SD/-Leu/-Trp固体培养基上,再点种至SD/-Ade/-His/-Leu/-Trp/X-α-gal固体培养基以鉴定编码蛋白间的相互作用。表型鉴定结果显示,只有共转化有p GADT7-CP/p GBKT7-CP的酵母重组子能够在SD/-Ade/-His/-Leu/-Trp/X-α-gal上生长并显蓝,而其它重组子均不能在其上生长,表明病毒的CP能够自身互作,而其他编码蛋白间无相互作用。为了进一步研究病毒CP自身互作的作用位点,分别从CP的N端和C端截短若干个氨基酸序列,结果发现CP的自身互作是高度敏感的,任何较少氨基酸序列的缺失都将导致其自身互作的丧失。本研究为深入探讨病毒的组装机制和致病机理奠定了理论基础。     

数据稀缺生态系统中多种类质量谱模型的构建

多种类生态模型已经被广泛应用于渔业活动影响应预测和管理措施效果评估。质量谱模型是一种基于生理过程构建的生态模型,该模型为描述鱼类群落在个体摄食变异和随个体发生的生态位迁移提供了一个可行的方法。尽管生态模型在增进生态系统认识上具有重要意义,其应用在数据稀缺的渔业中受到很大限制。作为实践基于生态系统渔业管理(EBFM)的第一步,本研究构建了海州湾鱼类群落的质量谱模型。本研究详述了数据收集和模型参数化的过程,以促进该模型在数据稀缺的生态系统中未来的应用。作为一个范例,研究展示了不同捕捞努力量对生态系统的影响,并采用一套生态指标监测其动态。群落生物量、多样性指数、W指数,大鱼指数(LFI),平均体重和群落质量谱斜率对捕捞压力的响应呈非线性,最大的捕捞强度并非总是对鱼类群落产生最强的影响。本文强调了构建谱模型在生态研究中的的价值和可行性,并讨论了模型的局限性和改进的可能。本研究旨在促进质量谱模型的广泛应用以更好地支持基于生态系统的渔业管理。