昆仑Ms 8.1地震前青藏块体北、东缘水平运动变形的关联特征

青藏块体东北缘和川滇GPS监测区1991(1993)、1999和2001年高精度GPS观测资料揭示：2001年11月14日昆仑Ms8．1地震前，青藏块体北、东缘构造区域水平运动变形场动态演变具有一定的关联性特征。即：在继承性运动总体背景下，临近大震发生时两区域运动强度同步减弱且变形状态发生变化。结合地质构造分析研究认为，昆仑Ms8．1地震前，青藏块体边界运动变形的关联性变化与大震孕育后期大范围应力应变快速积累所形成的扰动应力场有关；随着块体内部大震的发生、应变能的大量释放和构造应力场的调整，可能会促使块体边界地带具有较高应变积累的相关构造部位(尤其是未被历史强震破裂贯通的地带)的应力应变的进一步积累或破裂释放。     

Preliminary Characterisation of New Glass Reference Materials (GSA-1G, GSC-1G, GSD-1G and GSE-1G) by Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry Using 193 nm, 213 nm and 266 nm Wavelengths

New glass reference materials GSA-1G, GSC-1G, GSD-1G and GSE-1G have been characterised using a prototype solid state laser ablation system capable of producing wavelengths of 193 nm, 213 nm and 266 nm. This system allowed comparison of the effects of different laser wavelengths under nearly identical ablation and ICP operating conditions. The wavelengths 213 nm and 266 nm were also used at higher energy densities to evaluate the influence of energy density on quantitative analysis. In addition, the glass reference materials were analysed using commercially available 266 nm Nd:YAG and 193 nm ArF excimer lasers. Laser ablation analysis was carried out using both single spot and scanning mode ablation. Using laser ablation ICP-MS, concentrations of fifty-eight elements were determined with external calibration to the NIST SRM 610 glass reference material. Instead of applying the more common internal standardisation procedure, the total concentration of all element oxide concentrations was normalised to 100%. Major element concentrations were compared with those determined by electron microprobe. In addition to NIST SRM 610 for external calibration, USGS BCR-2G was used as a more closely matrix-matched reference material in order to compare the effect of matrix-matched and non matrix-matched calibration on quantitative analysis. The results show that the various laser wavelengths and energy densities applied produced similar results, with the exception of scanning mode ablation at 266 nm without matrix-matched calibration where deviations up to 60% from the average were found. However, results acquired using a scanning mode with a matrix-matched calibration agreed with results obtained by spot analysis. The increased abundance of large particles produced when using a scanning ablation mode with NIST SRM 610, is responsible for elemental fractionation effects caused by incomplete vaporisation of large particles in the ICP.     

中国中西部前陆盆地的地质特征及油气聚集

中国中西部前陆盆地具有十分丰富的油气资源,近年来油气勘探也取得了很大的成果,但总体上来说其地质情况复杂、研究程度较低。世界上典型的前陆盆地一般位于造山带和稳定的克拉通之间的狭长槽地,而在中国中西部则主要为与古特提斯造山带在新特提斯阶段再活动有关的陆内会聚形成的“再生”前陆盆地,因此与世界典型前陆盆地相比中国中西部前陆盆地具有一定的“特殊性”。根据两期前陆的叠合程度差异造成的盆地几何形态、挠曲沉降、地层层序、沉积充填、构造变形特征的特点,将中国中西部前陆盆地归纳为改造型、新生型、叠加型和早衰型四种组合类型的前陆盆地。中西部不同组合类型前陆盆地具有不同的结构特征,决定了不同组合类型前陆盆地成藏特征和油气勘探潜力上的差异。     

Three dimensional numerical simulation of residential building on shrink–swell soils in response to climatic conditions

Shrink–swell soils can cause distresses in buildings, and every year, the economic loss associated with this problem is huge. This paper presents a comprehensive system for simulating the soil–foundation–building system and its response to daily weather conditions. Weather data include rainfall, solar radiation, air temperature, relative humidity, and wind speed, all of which are readily available from a local weather station or the Internet. These data are used to determine simulation flux boundary conditions. Different methods are proposed to simulate different boundary conditions: bare soil, trees, and vegetation. A coupled hydro‐mechanical stress analysis is used to simulate the volume change of shrink–swell soils due to both mechanical stress and water content variations. Coupled hydro‐mechanical stress‐jointed elements are used to simulate the interaction between the soil and the slab, and general shell elements are used to simulate structural behavior. All the models are combined into one finite element program to predict the entire system's behavior. This paper first described the theory for the simulations. A site in Arlington, Texas, is then selected to demonstrate the application of the proposed system. Simulation results are shown, and a comparison between measured and predicted movements for four footings in Arlington, Texas, over a 2‐year period is presented. Finally, a three‐dimensional simulation is made for a virtual residential building on shrink–swell soils to identify the influence of various factors. Copyright © 2015 John Wiley & Sons, Ltd.     

Elastic lateral dynamic impedance functions for a rigid cylindrical shell type foundation

Elastic lateral dynamic impedance functions are defined as the ratio of the lateral dynamic force/moment to the corresponding lateral displacement/rotation at the top ending of a foundation at very small strains. Elastic lateral dynamic impedance functions have a defining influence on the natural frequencies of offshore wind turbines supported on cylindrical shell type foundations, such as suction caissons, bucket foundations, and monopiles. This paper considers the coupled horizontal and rocking vibration of a cylindrical shell type foundation embedded in a fully saturated poroelastic seabed in contact with a seawater half‐space. The formulation of the coupled seawater–shell–seabed vibration problem is simplified by treating the shell as a rigid one. The rigid shell vibration problem is approached by the integral equation method using ring‐load Green's functions for a layered seawater‐seabed half‐space. By considering the boundary conditions at the shell–soil interface, the shell vibration problem is reduced to Fredholm integral equations. Through an analysis of the corresponding Cauchy singular equations, the intrinsic singular characteristics of the problem are rendered explicit. With the singularities incorporated into the solution representation, an effective numerical method involving Gauss–Chebyshev method is developed for the governing Fredholm equations. Selected numerical results for the dynamic contact load distributions, displacements of the shell, and lateral dynamic impedance functions are examined for different shell length–radius ratio, poroelastic materials, and frequencies of excitation. Copyright © 2016 John Wiley & Sons, Ltd.     

Modelling landslides in unsaturated slopes subjected to rainfall infiltration using material point method

This paper presents a dynamic fully coupled formulation for saturated and unsaturated soils that undergo large deformations based on material point method. Governing equations are applied to porous material while considering it as a continuum in which the pores of the solid skeleton are filled with water and air. The accuracy of the developed method is tested with available experimental and numerical results. The developed method has been applied to investigate the failure and post‐failure behaviour of rapid landslides in unsaturated slopes subjected to rainfall infiltration using two different bedrock geometries that lie below the top soil. The models show different failure and post‐failure mechanisms depending on the bedrock geometry and highlight the negative effects of continuous rain infiltrations. Copyright © 2016 John Wiley & Sons, Ltd.     

单片卫星影像在航测测图中的利用

在边境测图过程中,经常遇到较大面积云层问题,使航测测图无法顺利进行。能充分利用的影像资源是第一次全国地理国情普查的影像,有国产高分2号、SPOT-6、资源3号等单片卫星影像,无立体像对影像。通过对国情普查的影像分析选取,选取一试验区域进行试验,用国产高分2号卫星影像与SPOT-6卫星影像组成立体像对测制地物地貌,用Worldview卫星立体像对影像测制同一区域的地物地貌,将两种影像源组成立体模型测制的地物地貌进行比较及精度统计,说明单片卫星影像在航测测图中达到的精度。     

Evidence for a shock-metamorphic breccia within a buried impact crater,Lake Raeside,Yilgarn Craton,Western Australia

Mineral exploration drilling 60 km west of Leonora in 2008 intersected >95 m of poorly consolidated granitoid-dominated breccia at the base of a Cenozoic paleochannel beneath Lake Raeside. The breccia, initially interpreted as a kimberlite, is composed of poorly consolidated fragments of granitic gneiss, felsite and metamorphosed mafic rock within a matrix of fine to medium-grained breccia. Microscopic examination revealed quartz grains displaying well-developed planar deformation features (PDFs) dominated by the ω? {1013} planar set, diaplectic silica glass and diaplectic plagioclase glass. These features constitute the diagnostic hallmarks of shock metamorphism owing to high-velocity impact of a large meteorite or asteroid. The PDFs in quartz grains of the breccia are distinctly different from metamorphic deformation lamellae produced tectonically or in diatremes. Airborne total magnetic intensity data suggest an outline of an 11 km-diameter crater, consistent with the significant thickness of the shock-metamorphosed breccia at >95 m, suggestive of the existence of a large impact structure.     

Sources of anthropogenic fire ignitions on the peat-swamp landscape in Kalimantan,Indonesia

Fire disturbance in many tropical forests, including peat swamps, has become more frequent and extensive in recent decades. These fires compromise a variety of ecosystem services, among which mitigating global climate change through carbon storage is particularly important for peat swamps. Indonesia holds the largest amount of tropical peat carbon globally, and mean annual CO₂ emissions from decomposition of deforested and drained peatlands and associated fires in Southeast Asia have been estimated at ∼2000 Mt y-1. A key component to understanding and therefore managing fire in the region is identifying the land use/land cover classes associated with fire ignitions. We assess the oft-asserted claim that escaped fires from oil palm concessions and smallholder farms near settlements are the primary sources of fire in a peat-swamp forest area in Central Kalimantan, Indonesia, equivalent to around a third of Kalimantan's total peat area. We use the MODIS Active Fire product from 2000 to 2010 to evaluate the fire origin and spread on the land use/land cover classes of legal, industrial oil palm concessions (the only type of legal concession in the study area), non-forest, and forest, as well as in relation to settlement proximity. We find that most fires (68–71%) originate in non-forest, compared to oil palm concessions (17%–19%), and relatively few (6–9%) are within 5 km of settlements. Moreover, most fires started within oil palm concessions and in close proximity to settlements stay within those boundaries (90% and 88%, respectively), and fires that do escape constitute only a small proportion of all fires on the landscape (2% and 1%, respectively). Similarly, a small proportion of fire detections in forest originate from oil palm concessions (2%) and within close proximity to settlements (2%). However, fire ignition density in oil palm (0.055 ignitions km⁻²) is comparable to that in non-forest (0.060 km-2 ignitions km-²), which is approximately ten times that in forest (0.006 ignitions km⁻²). Ignition density within 5 km of settlements is the highest at 0.125 ignitions km⁻². Furthermore, increased anthropogenic activity in close proximity to oil palm concessions and settlements produces a detectable pattern of fire activity. The number of ignitions decreases exponentially with distance from concessions; the number of ignitions initially increases with distance from settlements, and, around from 7.2 km, then decreases with distance from settlements. These results refute the claim that most fires originate in oil palm concessions, and that fires escaping from oil palm concessions and settlements constitute a major proportion of fires in this study region. However, there is a potential for these land use types to contribute substantially to the fire landscape if their area expands. Effective fire management in this area should therefore target not just oil palm concessions, but also non-forested, degraded areas where ignitions and fires escaping into forest are most likely to occur.     

改进霍夫变换的枢纽立交桥检测方法

针对传统遥感系统对特定建筑物提取难的问题,该文提出了一种高空摄影系统下基于改进霍夫变换的城市枢纽立交桥检测方法。该方法首先对图像进行预处理和分割,对分割后图像进行形态学处理提取直线和曲线道路,弥补了单一提取直线道路的不足;然后对提取后的道路进行基于改进霍夫变换的近似圆形立交桥匝道的识别;最后依据圆形完整度门限判断可识别的圆形匝道个数,并根据识别数目来判定是否存在立交桥。经过实验比较分析,该方法对于国内外常规的立交桥系统识别效果都较好。