软土地基上静压预制桩承载力的工后增大效应

分析了软土地基上预制桩承载力的时效性机理，介绍了几种研究承载力时效性的经验回归公式，结合工程说明应充分认识承载力时效性的科学性和利用这种规律潜在的巨大经济效益。     

抗拔桩设计方法

当地下水位较高时,地下车库等附属建筑物不得不对抗浮问题进行考虑,抗拔桩被越来越多的应用于工程中。依据工程实例对抗拔桩设计荷载条件、抗浮桩单桩承载力设计、抗浮桩桩身结构设计、群桩地基整体稳定性、单位面积抗浮力、抗拔桩抗裂分别进行了阐述,以及抗拔桩设计中应考虑的问题进行了论述。     

桩承载力时效对桩土相互作用及沉降的影响分析

对软土中两根47 m长灌注桩分别在成桩28 d和1 750 d后进行了承载力试验，其极限承载力提高幅度达到30％左右。分析了单桩承载力随时间提高(称为时效)的机理，提出了单桩承载力时效对桩筏基础桩土相互作用影响的分析方法，并结合工程实例进行了分析。     

振动沉模大直径现浇薄壁管桩技术及其应用 (Ⅰ):开发研制与设计

振动沉模现浇混凝土薄壁管桩（PCC桩）技术是河海大学自主开发研制的用于地基加固处理的专利技术，是一种适合于软土地区的新型高效优质桩型，可有效地提高地基承载力和减小地基沉降。笔者介绍了振动沉模现浇混凝土薄壁管桩的技术原理、加固机理、施工设备、施工工艺及其设计与质量检测方法。该桩型具有承载力高、质量可靠和工程造价低等优点，具有较大的推广应用价值。     

A STUDY ON THE FLOOD STORAGE CAPACITY IN DONGTING LAKE

1 INTRODUCTION Dongting Lake lies south of the middle reach of the Yangtze River in Hunan and Hubei provinces (Fig. 1). On the north side of Dongting Lake, there are the three diversion openings of the Yangtze River named Songzi, Taiping, and Ouchi, and, on the south and west sides, there are the four tributary streams named Xiang, Zi, Yuan, and Li Rivers. The flow of the three diversion openings and the four tributary streams runs into Dongting Lake, and runs out at Chenglingji a…     

Synthesis of zeolites using fly ash and their application in removing heavy metals from waters

Fly ash is the solid waste of thermal power plants where coal is used as fuel, and its management and utilization have been of environmental concern for decades. Since the technique of synthesizing zeolite from coal fly ash was introduced by Holler[1] (19…     

岩体变形模量的尺寸效应

岩土工程中,现场岩体的承压板试验和变形试验可看作是不同尺寸岩体的变形试验。在某工程的现场岩石力学试验中,对同一组试点的岩体先后进行了承压板变形试验和承载力试验,研究了岩体变形模量的尺寸效应,结果表明,岩体变形模量主要受岩体中的裂隙发育状况控制,当岩体质量较好时,可以由承载力试验曲线来确定岩体的变形特性,这一做法具有一举两得的效果。     

往复荷载作用下矩形钢管混凝土压弯构件承载力计算

本文基于往复荷载作用下矩形钢管混凝土压弯构件的实验结果，比较了国内外比较典型的设计规范(程)，包括英国BS5400(1979)、美国ACI318—99(1999)和AISC-LRFD(1999)、日本AIJ(1997)、欧洲EC4(1994)、中国GJB4142-2000(2001)和福建省地方标准(送审稿)，及本文数值方法在计算往复荷载作用下矩形钢管混凝土压弯构件承载力的差异。结果表明，在进行往复荷载作用下矩形钢管混凝土压弯构件承载力计算时，各种计算方法获得的承载力都偏于安全，其中，数值计算结果与实验结果最接近，GJB4142—2000(2001)的计算结果与实验结果吻合程度稍差，ACI318—99(1999)，EC4(1994)和福建省地方标准(送审稿)的计算结果比实验结果约低20％，而BS5400(1979)、AISC—LRFD(1999)和AIJ(1997)的计算结果比实验结果总体上低30％以上。本文结果可供进行矩形钢管混凝土结构设计时参考。     

Mechanisms of physico-chemical interaction of mercury with river sediments from a gold mining region in Brazil: Relative mobility of mercury species

Mercury accumulation in the food chain, as a consequence of gold recovery in Brazil, has been an issue of concern. Reactions of Hg in the environment are quite complex, and can involve various Hg chemical species. Laboratory experiments were carried out on Hg⁰ solubility, Hg complexation and sorption on river sediments from a gold mining region in Brazil. The reactivity and the mobility of Hg species were considered. Results indicate that methyl mercury is more mobile than ionic mercury, and that the presence of humic acid enhances drastically the solubility of Hg⁰. The soluble complex formed has a relatively lower interaction at the sediment/water interface and is more prone to spread through the aquatic environment.     

Transport in a 2-D saturated porous medium: A new method for particle tracking

A new method for solving the transport equation based on the management of a large numbe of particles in a discretized 2-D domain is presented. The method uses numerical variables to represent the number of particles in a given mesh and is more complex than the 1-D problem. The first part of the paper focuses on the specific management of particles in a 2-D problem. The method also would be valid for three dimensions as long as the medium can be modeled similar to a layered system. As the particles are no longer tracked individually, the algorithm is fast and does not depend on the number of particles present. The numerical tests show that the method is nearly numerical dispersion free and permits accurate calculations even for simulations of low-concentration transport. Because each mesh is considered as a closed system between two successive time steps, it is easy to add adsorption phenomenon without any problem of numerical stability. The model is tested under conditions that are extremely demanding for its operating mode and gives a good fit to analytical solutions. The conditions in which it can be used to best advantage are discussed.