Mica Inclusions inside Host Mica Grains from the Sutlej Section of the Higher Himalayan Crystallines, India—Morphology and Constrains in Genesis

Abstract: Biotite and muscovite inclusions inside mica host minerals from the Sutlej section of the Higher Himalayan Crystalline were studied under an optical microscope. These inclusions formed possibly by local recrystallization of mica grains during regional prograde metamorphism, with some affected by top-to-SW shear leading to parallelogram shapes. Recrystallization may have been assisted by solution transfer along the cleavage planes of the host grains. The relative competency of deformed phyllosilicate inclusions with the same or different composition to the host depends on the size and orientation of (001) cleavage planes of the inclusions relative to the host. Shearing of mica inclusions led to their parallelogram geometries within the contained mica inclusions. Some of the sheared inclusions deflect cleavage planes in the host minerals and define flanking microstructures. Trapezoid-shaped inclusions are a new finding that deserves more attention for their genesis. These structurally anisotropic inclusions did not originate from sub-grains, secondary infillings or retrogression. These inclusions are also not related to pseudomorphism, isomorphism, folding of the bulk rock etc. Some of the inclusions formed by recrystallization of the host mineral during top-to-SW ductile shear.     

青海省都兰县阿拉克湖地区水系沉积物地球化学特征及找矿方向

分析了区内的水系沉积物地球化学参数特征及其元素的相关性,认为元素(地球化学)异常(高值区)严格受东昆中断裂带、东昆南断裂带、布青山南坡乌断裂带,以及阿尼玛卿蛇绿岩带和东昆中蛇绿岩带,古-中元古代地层、岩体接触带、热液活动、脉岩等因素联合控制。根据异常特征与成矿地质条件,圈定了找矿远景区5个,且为该区下一步的找矿工作指明了方向。     

С��Ⱥ���봨�����ʼ���ѵ�˺�ѵ�����ͼ��

??????M8.0????????????????????С???????????????????о???????????λ????????????????????ν???ие???????????????????1??M8.0??????????????????????????????????????С????????????????????????????????????????????????42°????????????????????????????20 km??2?????????????????????????????????????10 km?????????????????С??????????????????????????????????????????????????????λ?????????7 km??3??2??14??
ML3.7?????????????????93°?????????????????????С??????????????????????????????????2???????￡????????????????????????????????????????????????????????????????4??2??28??ML3.8?????????λ?????????????????????????????????????????????????????????￡????????????     

Groundwater dating with 3H and SF6 in relation to mixing patterns,transport modelling and hydrochemistry

A comprehensive study of a sandy aquifer of deltaic origin in southern Poland included water chemistry, isotopes, dissolved trace gases and transport modelling. Tritium, sulphur hexafluoride (SF₆) and freons (F‐11, F‐12 and F‐113) showed the presence of modern waters in the recharge areas and shallow confined parts of the aquifer. The presence of older Holocene waters farther from the recharge areas was indicated by lack of ³H, SF₆ contents ≤0·02 fmol l⁻¹ and relatively low ¹⁴C values. The discharge from the system is by upward seepage in the valley of a major river. Pre‐Holocene waters of a cooler climate, identified on the basis of δ¹⁸O, δ²H, ¹⁴C, Ne and Ar data, were found in some distant wells. Concentrations of N₂, Ne and Ar determined by gas chromatography were used for calculating the noble gas temperatures, air excess needed for correction of SF₆, and nitrogen content released by denitrification process. The time series of ³H content available for some wells supplied quantitative information on age distributions and the total mean ages of flow through the unsaturated and saturated zones. The derived ³H age distributions turned out to be very wide, with mean values in the range of about 30 to 160 years. For each well with determined ³H age, the SF₆ data showed either a lower age range or the possibility of a lower age as expected due to shorter travel times of SF₆ through the unsaturated zone, which most probably also resulted in different types of age distributions of these tracers. Freons appeared to be of little use for individual age determinations. A quantitative estimation of two‐component mixing from SF₆ ³H relations is not possible unless the travel time of ³H through the unsaturated zone is comparable to that of SF₆. The ratio of integrals of the response function over the age range with tracer and the whole response function yields the ratio of water with tracer to total flow of water. That ratio is a tracer‐dependent function of time. Transport modelling of SF₆ tracer done with MT3D code yielded initially large discrepancies between calculated and measured tracer concentrations. Some discrepancies remained even after calibration of the transport model with SF₆. Simulation of tritium contents with a calibrated transport model yielded reasonable agreement with measured contents in some wells and indicated a need for further investigations, particularly in the eastern part of the aquifer. The existence of distinct hydrochemical zones is consistent with the tracer data; young waters with measurable ³H and SF₆ contents are aerobic and of HCO₃ Ca or HCO₃ SO₄ Ca types. Slightly elevated Na and Cl contents, as well as the highest concentrations of SO₄ and NO₃ within this zone are due to anthropogenic influences. Anaerobic conditions prevail in the far field, under the confining cover, where pre‐bomb era Holocene waters dominate. In that zone, dissolved oxygen, NO₃ and U contents are reduced, and Fe, Mn and NH₄ contents increase. In the third zone, early Holocene and glacial waters occur. They are of HCO₃ Ca Na or HCO₃ Na types, with TDS values higher than 1 g l⁻¹ and Na content higher than 200 mg l⁻¹, due to either small admixtures of ascending or diffusing older water or freshening of marine sediments, a process that is probably occurring till the present time. Copyright © 2005 John Wiley & Sons, Ltd.     

Petrology, geochronology, and tectonics of shear zones in the Zermatt–Saas and Combin zones of the Western Alps

Metre to tens‐of‐metre wide, steeply dipping, greenschist facies shear zones that cut blueschists and eclogites of the Combin and Zermatt–Saas Zones at Täschalp and in adjacent areas of the western Alps were sites of extensive recrystallization driven by fluid flow and deformation. Rb–Sr data imply that these shear zones formed at 42–37 Ma with a systematic younging of structures northward toward, and into, the hangingwall of the Mischabel Structure. Shearing commenced at 400–475 °C and 400–500 MPa and continued as pressures and temperatures fell to 300–350 °C and 300–350 MPa. Individual shear zones were active for 2–3 Myr with later lower grade stages of shearing concentrated into narrow zones. Fluids that infiltrated the shear zones were water rich (X_H2O > 0.9). Alteration zones around albite veins and at the margins of serpentinite bodies are penecontemporaneous with these shear zones and formed at approximately the same conditions. The eclogites were exhumed from c. 64 km at 44 Ma to 14–16 km at 42–41 Ma implying exhumation rates of 2–5 cm yr^?1. Rapid exhumation was probably achieved by extension aided by buoyancy, following subduction of continental crust, and rapid erosion. The shear zones form part of a regional‐scale extensional system responsible for a significant portion of the exhumation of the subducted oceanic crust.     

灞源韧性剪切带特征及其地质意义

本文对灞源地区不同时代的韧性剪切带的运动学、动力学特征进行了研究。笔者认为,前人所称的部分太华群(Arth_3b)是太古宙末期太华群韧性变形的产物;张家坪花岗岩以左旋螺旋式上升侵位;燕山期,多期活动韧性剪切带是本区金矿形成富集的主要原因之一。     

南海神狐海域水合物一维速度结构研究： 基于中—低饱和度水合物区的约束

高精度OBS探测作为目前研究水合物的常用技术手段,可以获取水合物矿体精细速度结构,在研究天然气水合物饱和度、水合物资源的预测与开发等方面具有重要指导意义。然而正演模拟OBS速度结构是繁琐漫长的过程,构建合理的初始模型是后续精细结构快速成像的重要前提。本研究基于全球18个已探明地震波速度的水合物区,分析了水合物矿体内纵波速度的共性特征和影响因素,拟合了水合物矿体带纵波速度与海水深度、沉积物厚度的经验公式。综合经验公式、OBS数据与多道地震剖面,建立了神狐水合物区横向均匀初始模型,并通过射线追踪与走时拟合模拟了神狐海域的一维纵波速度结构。结果表明,神狐水合物矿体带具有高纵波速度(1.83~1.92 km/s）,游离气层具有低P波速度（1.60~1.70 km/s）,此外,基于全球的水合物速度经验公式对神狐海域速度结构模拟具有重要参考意义,有望为获取神狐海域二维/三维精确速度结构提供可靠的初始模型,进而指导水合物精细勘察与资源评估。     

俯冲带地震诱发机制:研究进展综述

俯冲带作为地球循环体系的关键部位,具有构造活跃、地震多发以及地质条件复杂等特征。基于震源位置,俯冲带地震既可划分为板间和板内地震,也可分为浅源、中源和深源地震。俯冲带内的浅源地震包括板间地震和浅源板内地震,而中源和深源地震皆属于板内地震。在地球浅部,温度与压力低,浅源地震是由岩石发生脆性破裂或沿着先存断层发生不稳定摩擦滑移造成的。随着深度增加,温度和压力的增加使得流行于浅部的脆性和摩擦行为在无水条件下被强烈抑制,岩石从而表现为可抑制地震的韧性行为,使得中-深源地震的诱发机制有别于常规的脆性行为。随着研究的逐渐深入,人们了解到中源地震的诱发机制主要是脱水或与流体相关的致脆以及塑性剪切失稳,而深源地震的成因主要是相变致裂。然而,中-深源地震很可能是两种或两种以上机制共同作用的结果。例如,在中源深度既可能是流体相关的致脆导致脱水源区的脆性围岩产生地震,亦可能是脱水的蛇纹岩本身可能在流体孔隙压的作用下作粘滑滑移,而前者比后者更为重要。孕震带宽度大于"反裂隙模型"预测的亚稳态橄榄石冷核宽度的深源地震可能是由第一阶段的相变致裂和第二阶段的塑性剪切失稳诱发,而孕震带的实际宽度与预测宽度相当的深源地震则可能仅由相变致裂引起。只要过渡带内名义无水矿物中的结构水能释放出来,脱水致脆同样可能触发一些深源地震;而塑性剪切失稳不仅能在中-深源地震触发后的扩展阶段起着主导作用,而且还能单独触发一些中-深源地震,因此能够解释大多数反复发生的中-深源地震活动。     

一种模拟韧性剪切带中椭球状标志体运动、变形的新方法

韧性剪切带中赋存的椭球状应变标志体(砾石、碎斑等)是研究剪切带运动学、动力学的重要应变标志体。传统研究中椭球状标志体通过对野外露头的观测或与实验岩石学结合,判断剪切带运动方向、探讨运动学和流变学特征。随着数值模拟技术在韧性剪切带中的引入和推广,国内外许多学者试图恢复椭球状标志体的运动轨迹和变形特征,并取得了显著的成果。然而,国内文献对于模拟韧性剪切带椭球状标志体的定量及模拟研究甚少,研究方法也鲜为介绍。基于此,针对韧性剪切带中椭球状标志体变形的最新研究进展,详细介绍建立在Jeffery理论和Eshelby理论之上的数值模拟思路和方法,并利用Mathcad软件模拟了给定条件下的椭球状标志体的运动轨迹、变形特征。     

A GIS-based method for defining snow zones: application to the western United States

This study maps the geographic extent of intermittent and seasonal snow cover in the western United States using thresholds of 2000–2010 average snow persistence derived from moderate resolution imaging spectroradiometer snow cover area data from 1 January to 3 July. Results show seasonal snow covers 13% of the region, and intermittent snow covers 25%. The lower elevation boundaries of intermittent and seasonal snow zones increase from north-west to south-east. Intermittent snow is primarily found where average winter land surface temperatures are above freezing, whereas seasonal snow is primarily where winter temperatures are below freezing. However, temperatures at the boundary between intermittent and seasonal snow exhibit high regional variability, with average winter seasonal snow zone temperatures above freezing in west coast mountain ranges. Snow cover extent at peak accumulation is most variable at the upper elevations of the intermittent snow zone, highlighting the sensitivity of this snow zone boundary to climate conditions.