黄土滑坡临滑预报的应变控制方法

我国西北部地区黄土沉积巨厚，地质构造复杂，土体强度低，水敏感性强，各种类型的黄土滑坡广泛分布。黄土滑坡具有滑动规模大、滑动速度快、灾害损失严重等特点。黄土滑坡滑动时间预报，特别是临滑预报在地质灾害防治领域具重要意义。根据黄土力学性质试验与典型黄土滑坡变形分析研究结果，在对比分析黄土剪切应变特性与滑坡滑动破坏机制的基础上，论文提出了一种黄土滑坡临滑预报的应变控制方法。建立了中、浅层与厚层黄土滑坡的应变破坏标准。经多处滑坡实例验证，结果基本合理，可应用于黄土滑坡临滑预报。     

新疆东天山沙泉子地区化探遥感综合找矿信息与金矿成矿预测

沙泉子测区是东天山地区觉罗塔格成矿带中很有前景的成矿远景区，具有形成与酸性侵入岩有关的金矿床的前景。在对区域成矿地质条件的综合研究基础上，通过对化探和遥感找矿信息的综合分析，圈定了4片具有金矿成矿地质异常的找矿靶区，其中沙泉子北东14km处为一最佳找矿靶区。     

论油气化探精查技术及其应用

油气化探精查技术是在盆地有利聚集区(带)进行化探和石油地质详查的基础上,对圈闭进行含油气性评价并优选钻探目标的化探精细调查技术.它是包含样品采集、实验测试、信息提取和解释评价等为一体的系列技术.简述精查技术产生的背景,在论述化探精查技术及其在中国中东部地区的应用效果的基础上,展望该项新技术在西部油气勘探中的应用前景.     

地震荷载作用下温度和围压对冻土强度影响的试验研究

通过对重塑冻结兰州黄土的动三轴试验，较系统研究了地震荷载作用下冻土的动强度特性，并且定量研究了其在不同温度(-2℃、-5℃、-7℃)和围压(1MPa、3MPa、5MPa)条件下的变化规律．结果发现：冻结黄土的动抗剪强度随围压的增大、温度的降低、振次的减少而增大；动粘聚力Cd随振次的减小和温度的降低而增大；动内摩擦角吼随振次的增大和温度的降低而增大。     

ADV measurements of velocity distributions in a gravel‐bed flume

Velocity measurements carried out by an acoustic doppler velocimeter (ADV) in a rectangular laboratory ?ume having a gravel bed are presented. The velocity pro?les are measured in six verticals of the channel cross‐section having an increasing distance (from 4 to 38·5 cm) from the ?ume wall. The experimental runs are carried out for ?ve different bed arrangements, characterized by different concentrations of coarser elements, and for the two conditions of small‐ and large‐scale roughness. For both hydraulic conditions, the velocity measurements are ?rst used to test the applicability of the Dean pro?le and of the logarithmic pro?le corrected by a divergence function proposed in this paper. Then, for each value of the depth sediment ratio h/d₈₄, the non‐dimensional friction factor parameter is calculated by integration of the measured velocity distributions in the different verticals of the cross‐section. Finally a semi‐logarithmic ?ow resistance equation is empirically deduced. Copyright © 2003 John Wiley & Sons, Ltd.     

三角钢标对GPS测量影响的试验分析

GPS测量控制网为了与地面国家控制网进行联合的平差，必须与国家坐标系进行联测，GPS接收机有时也必须安置在有三角钢标的旧有控制点上。通过对此分析研究了三角钢标对GPS测量的影响，对设计和实施GPS测量的用户具有一定的参考价值。     

On Rhythmical Layering of Rocks Formed from Basaltic Magma

Formation of rhythmical layering in intrusive basic and ultrabasic rock bodies is explained in different ways, in particular, by the movement of microparticles (mineral clusters) of plagioclase and pyroxene within the basalt melt under the influence of thermal and gravitational forces. A model of cluster movement is proposed as a consequence of the forces appearing when ultrasonic elastic fluctuations pass through the melt. The model is based on fundamental dynamic equations. Depending on cluster density, wave parameters, and magmatic chamber size, in the melt there can form different combinations of rhythmically alternating layers of different composition.     

Geomechanical Properties of Shear Zones in the Eastern Aar Massif,Switzerland and their Implication on Tunnelling

Summary ¶Rock zones containing a high fracture density and/or soft, low cohesion materials can be highly problematic when encountered during tunnel excavation. For example in the eastern Aar massif of central Switzerland, experiences during the construction of the Gotthard highway tunnel showed that heavily fractured areas within shear zones were responsible for overbreaks in the form of chimneys several metres in height. To understand and estimate the impact of the shear zones on rock mass behaviour, knowledge concerning the rock mass strength and deformation characteristics is fundamental. A series of laboratory triaxial tests, performed on samples from granite- and gneiss-hosted shear zones revealed that with increasing degree of tectonic overprint, sample strength decreases and rock behaviour shows a transition from brittle to ductile deformation. These trends may be explained by increasing fracture densities, increasing foliation intensity, increasing thickness of fine-grained, low cohesion fracture infill, and increasing mica content associated with the increasing degree of tectonic overprint. As fracture density increases and the influence of discrete, persistent discontinuities on rock mass strength decreases, behaviour of the test samples becomes more and more representative of rock mass behaviour, i.e. that of a densely fractured continuum. For the purpose of numerical modeling calculations, the shear zones may be subdivided with respect to an increasing fracture density, foliation intensity and mica content into a strongly foliated zone, a fractured zone and a cohesionless zone, which in turn exhibit brittle, brittle-ductile and ductile rock mass constitutive behaviour, respectively.Received December 17, 2001; accepted January 9, 2003 Published online April 29, 2003     

闪长岩强风化带做高层建筑天然地基的可行性研究

借助于中国工商银行山东省分行营业办公楼的工程实践,将常规勘察与原位测试相结合,运用野外钻探、室内试验、原位测试多种手段,对闪长岩强风化带的物理力学性质进行了测试分析和深入地研究,并通过对承载力、沉降变形的验算,得出其作为高层建筑的天然地基是可行的。实践证明,与桩基础处理方案相比,节省资金近200万元,大大加快了施工进度,减少了基础施工难度,取得了巨大的经济效益与社会效益;同时,也提出了研究岩石风化带所遇到的问题:由于采取原状试样及制样难,导致对其物理力学性质了解不够。     

新疆某水利枢纽工程软弱结构面抗剪强度参数的试验研究

某水利枢纽工程位于伊犁地区,影响工程的主要问题为坝基岩体软弱结构面和断层的抗滑稳定问题。根据工程实际条件和软弱夹层特性,采取现场断层软弱结构面试验和室内模拟试验相结合,获得软弱夹层的抗剪参数。实践证明,把两种方法结合起来的试验成果可靠,尤其对一些不具备进行现场大型岩体软弱夹层抗剪试验的工程,采用室内中型直剪仪进 行剪切试验具有实用意义。