海底剖面声阻抗分布声遥测模拟实验研究

本文介绍一种声遥测海底平面层系声阻抗分布的模拟实验结果。实验在油漆厂冷却水池中进行,采用取样平均迭代的反演方法,对三介质层系的遥测结果与实测值较好地接近。     

黄河断流对河口空间场后效反馈的遥感复合信息研究

就黄河断流对河口空间场后效所涉及的地理要素的演变,以所建河口演变概念-遥感信息系统,分析研究了黄河口近期演变的互关联信息基础,并依据研究目标的信息需求分析(IRA)与水下地貌趋势面分析的结果,阐述了河口空间场诸种反馈信息、变异中直观信息及隐伏信息.     

基于二次散射的水污染遥感模型及其在珠江口水域的应用

根据水中悬浮物、污染物和水分子等的散射和吸收物理机制建模是实现水污染定量遥感的有效途径.基于一次散射的水污染遥感模型简单易行,但在浑浊度较大时其精度不高.在基于一次散射模型的基础上分析了多次散射的能量组成特点,提出再考虑二次散射可使模型的精度显著提高且不至于使模型过于复杂;导出了二次散射的补偿因子,同时给出了考虑二次散射因子的简单计算方法.将该模型应用于珠江口水域的水污染遥感的结果表明,较之基于一次散射的模型,考虑二次散射的水污染遥感模型在精度上有明显改进.遥感提取结果显示,珠江口水域重污染区主要分布在伶仃洋东北部,香港维多利亚港和深圳湾.     

SAS测量水体表观光学参数的方法

SeaWiFS航空模拟器（SAS）是专门为在水面之上测量水体表观光学参数的现场设备。文章在介绍SAS现场测量以及数据处理基本方法的基础上，分析了2002年黄海试验SAS的应用效果，并与剖面法测量数据进行了比对。     

A Sensitivity Analysis of the Waterline Method of Constructing a Digital Elevation Model for Intertidal Areas in ERS SAR scene of Eastern England

A sensitivity analysis of the waterline method of constructing a Digital Elevation Model (DEM) of an intertidal zone using remote sensing and hydrodynamic modelling is described. Variation in vertical height accuracy as a function of beach slope is investigated using a set of nine ERS Synthetic Aperture Radar (SAR) images of the Humber/Wash area on the English east coast acquired between 1992 and 1994. Waterlines from these images are heighted using a hydrodynamic tide-surge model and interpolated using block kriging. On 1:500 slope beaches, an average block height estimation standard deviation of 18–22 cm is achieved. This rises to 27 cm on 1:100 slope beaches, and 32 cm on 1:30 slope beaches. The average heighting error at different slopes is decomposed into components due to waterline heighting error, inadequate sensor resolution and interpolation inaccuracy. It is shown that, at 1:500 slope, waterline heighting error and interpolation inaccuracy are the main error sources, whilst at 1:30 slope, errors due to inadequate sensor resolution become dominant. The ability of the technique to generate intertidal DEMs for almost the entire coastal zone in a complete ERS SAR scene covering 100×100 km is demonstrated.     

走航测深数据的自动采集

本文介绍应用IBM微机实现走航实时水深及定位数据的自动采集系统。给出了联机系统方框图及采集、传送数据的程序流程图。并对IBM-PC/XT微机与测深仪之间的接口、数码转换和数据处理作了简要的叙述。     

Automatic Registration of TOBI Side-Scan Sonar and Multi-Beam Bathymetry Images for Improved Data Fusion

Deep towed side-scan sonar vehicles such as TOBI acquire high quality imagery of the seafloor with very high spatial resolution but poor locational accuracy. Fusion of the side-scan sonar data with bathymetry data from an independent source is often desirable to reduce ambiguity in geological interpretations, to aid in slant-range correction and to enhance seafloor representation. The main obstacle to fusion is accurate registration of the two datasets.The application of hierarchical chamfer matching to the registration of TOBI side-scan sonar images and multi-beam swath bathymetry is described. This matches low level features such as edges in the TOBI image, with corresponding features in a synthetic TOBI image created by simulating the flight of the TOBI vehicle through the bathymetry. The method is completely automatic, relatively fast and robust, and much easier than manual registration. It allows accurate positioning of the TOBI vehicle, enhancing its usefulness as a research tool. The method is illustrated by automatic registration of TOBI and multi-beam bathymetry data from the Mid-Atlantic Ridge.