Numerical modelling of soil nails in loose fill slope under surcharge loading

A plane–strain numerical model has been developed to mimic a nailed loose fill slope under surcharge loading. The model has been used to back-analyse a field test that was conducted to examine the behaviour of soil nails in loose fill slopes under surcharge loading. Incremental elasto-plastic analyses coupled with pore water diffusion have been performed to study the internal deformation, water content redistribution in the soil, and the performance of the soil nails during and after the application of surcharge loading. The model parameters describing the mechanical and hydraulic properties of the nailed slope were obtained from field or laboratory tests. Different modelling techniques and boundary conditions for mimicking soil–nail interaction in loose fill material have been examined. Comparisons between numerical predictions and field measurements demonstrate that a new interfacial model, denoted as the embedded bond–slip interface model, is more suitable for mimicking the interfacial behaviour. Despite the simplicity of the numerical model, the predicted responses are in close agreement with the field test results, in particular the mobilisation and distribution of nail forces in response to surcharge loading. Both the numerical and the field test results suggest that soil nails are capable of increasing the overall stability of a loose fill slope for the loading conditions considered in this study. The increase in confining stress along the soil nails near the surcharge area is central to the overall stabilising mechanism. On the contrary, the nail forces mobilised near the nail heads are much smaller, indicating that the beneficial effect of having a structural grillage system at the slope face is limited for the range of surcharge pressures considered in this study.     

A field evaluation of enhanced reductive dechlorination of chlorinated solvents in groundwater,New York Metropolitan Area

An initial assessment of an old manufacturing site with groundwater impacted by trichloroethene (TCE) contamination in the metropolitan New York area showed that the TCE was being removed naturally by reductive dechlorination. However, complete dechlorination was not expected at the site because the process was progressing too slowly under transitional to aerobic conditions at a degradation constant of –0.0013 and a TCE half life of 533 days. A pilot test was conducted at the site in which a carbohydrate substrate (molasses) was injected into the groundwater to create an In-Situ Reactive Zone (IRZ). Post-pilot test groundwater sampling and analysis indicated that an IRZ was created successfully as the total organic carbon (TOC) content and conductivity increased significantly while oxidation-reduction (REDOX) potential and dissolved oxygen (DO) decreased. The created IRZ caused enhanced reductive dechlorination of TCE at the site, found to proceed with a degradation constant of –0.0158 and a TCE half life of 44 days.     

ISIS IR: The first infrared fibre-fed spectrograph

ISIS IR is the first attempt to use fibre optics for near infrared spectroscopy (1.8m). It is a field spectrograph (2D spectroscopy), and can work at various resolving powers (up to 25000). It can be transported anywhere, and soon it will be used at CFHT with one NICMOS 3-based camera.Département d'Astrophysique Extragalactique et de Cosmologie     

Coupling winds to ocean surface currents over the global ocean

A Wind stress–Current Coupled System (WCCS) consisting of the HYbrid Coordinate Ocean Model (HYCOM) and an improved wind stress algorithm based on Donelan et al. [Donelan, W.M., Drennan, Katsaros, K.B., 1997. The air–sea momentum flux in mixed wind sea and swell conditions. J. Phys. Oceanogr. 27, 2087–2099] is developed by using the Earth System Modeling Framework (ESMF). The WCCS is applied to the global ocean to study the interactions between the wind stress and the ocean surface currents. In this study, the ocean surface current velocity is taken into consideration in the wind stress calculation and air–sea heat flux calculation. The wind stress that contains the effect of ocean surface current velocity will be used to force the HYCOM. The results indicate that the ocean surface velocity exerts an important influence on the wind stress, which, in turn, significantly affects the global ocean surface currents, air–sea heat fluxes, and the thickness of ocean surface boundary layer. Comparison with the TOGA TAO buoy data, the sea surface temperature from the wind–current coupled simulation showed noticeable improvement over the stand-alone HYCOM simulation.     

Characteristics of developing waves as a function of atmospheric conditions,water properties,fetch and duration

For any specific wind speed, waves grow in period, height and length as a function of the wind duration and fetch until maximum values are reached, at which point the waves are considered to be fully developed. Although equations and nomograms exist to predict the parameters of developing waves for shorter fetch or duration conditions at different wind speeds, these either do not incorporate important variables such as the air and water temperature, or do not consider the combined effect of fetch and duration. Here, the wind conditions required for a fully developed sea are calculated from maximum wave heights as determined from the wind speed, together with a published growth law based on the friction velocity. This allows the parameters of developing waves to be estimated for any combination of wind velocity, fetch and duration, while also taking account of atmospheric conditions and water properties.     

Lacustrine basin unconventional resource plays: Key differences

There has been a revival in hydrocarbon source rock characterization and development associated with growing interest in unconventional resources, where these fine-grained organic-rich rocks act as both source and reservoir. To-date, the exploration focus on shale reservoirs has been largely on marine systems. Lacustrine source rocks for conventional resources are geographically important, dominating regions such as China, Indonesia, and Brazil's resource-base. However, they have been generally untested for unconventional resources.There are a number of key differences in the nature of these hydrocarbon systems that should be considered when assessing whether lacustrine systems may represent future unconventional opportunities in areas where the conventional resource-base is dominated by lacustrine-sourced oil. Among the key differences between these depositional systems is the greater sensitivity to high frequency climatic variability within lacustrine systems. Lacustrine systems are highly sensitive to changes in the balance between precipitation and evaporation, which may lead to rapid changes in lake level, potentially exceeding 600 m. These changes in depositional conditions are geologically rapid and may occur over periods of thousands of years. Such changes can reduce the areal extent of potentially thick source rock intervals to only those portions of a basin where a permanent deep lake was present. Thus the core unconventional target area may be geographically limited compared with their marine counterpart. Although potentially areally limited, a review of many lacustrine source rocks suggests that their thicknesses are often significantly greater than marine source rocks. An examination of the more distal portions of lacustrine systems, where better source rock potential is present reveals that there is generally limited connectivity between source and conventional reservoir. In these settings, such as the Wind River basin (Waltman Shale), the hydrocarbons remain trapped within the shales, potentially leading to over-pressured hydrocarbon charged systems. Such conditions suggest that although areally limited, viable unconventional targets may exist, if suitable reservoir conditions are present. Finally, the character of the oils produced is different in these settings, with lacustrine oils being waxy and displaying different hydrocarbon generation and cracking kinetics. High wax oils display distinct flow characteristics, being more viscous, and may offer different production challenges than their non-waxy marine equivalents. Additionally, differences in their cracking kinetics may indicate that the timing of gas generation for shale gas plays may differ significantly from marine systems.     

Effects of CO2 on benthic biota: An in situ benthic chamber experiment in Storfjorden (Norway)

Carbon capture and storage (CCS) methods, either sub-seabed or in ocean depths, introduces risk of CO₂ leakage and subsequent interaction with the ecosystem. It is therefore important to obtain information on possible effects of CO₂. In situ CO₂ exposure experiments were carried out twice for 10 days during 2005 using a Benthic Chamber system at 400 m depth in Storfjorden, Norway. pCO₂ in the water above the sediment in the chambers was controlled at approximately 500, 5000 and 20,000 μatm, respectively. This article describes the experiment and the results from measured the biological responses within the chamber sediments. The results show effects of elevated CO₂ concentrations on biological processes such as increased nanobenthos density. Methane production and sulphate reduction was enhanced in the approximately 5000 μatm chamber.     

青藏高原蒸散年际变化及其对西风和季风环流的响应

在评估4种蒸散格点资料（GLDAS,GLEAM,MERRA-2,CRET）在青藏高原适用性的基础上,以精度最高的CRET（R²为0.83,RMSE为14.76 mm）及同期气象环境数据,在年际尺度上分析了青藏高原蒸散变化特征及其受大尺度西风和季风环流的影响.结果表明,青藏高原年平均蒸散为414.2±18.32 mm,具有明显的年际变率和变化趋势,且区域（西风区、季风区和过渡区）间差异明显.蒸散年际变化与西风和季风环流强弱的年际变化密切相关,且季风和西风对蒸散的影响存在显著的区域差异.西风和季风通过调节局地气候环境因子影响蒸散：土壤湿度、归一化植被指数（NDVI）和风速三个局地气候环境要素是青藏高原蒸散主要调控因子,蒸散与土壤湿度和NDVI呈显著正相关,与风速在高原西部呈显著负相关、在高原东部呈显著正相关;研究WYI（Webster-Yang Index）和WI（Westerly Index）与影响蒸散的主导气候环境因子的关系发现,WYI与土壤湿度和NDVI呈显著正相关,且WYI与NDVI的相关系数在高原中部和南部较大,使得WYI对蒸散影响在中部分过渡区和南部季风区较大,WI也与土壤湿度和NDVI呈显著正相关,但WI与NDVI的相关系数在中部和北部较大,WI对蒸散影响在中部过渡区和北部西风区较大,同时,WI与风速在大部分高原显著相关,WI在高原东部通过风速对蒸散变化具有正贡献,使得季风区东部蒸散年际变化也受WI影响,最终使得WI对蒸散的影响在除季风区西部以外的区域较大.该研究结果可加深认识青藏高原水循环变化及其机理,为区域水资源和生态系统管理提供科学依据.

     

Wind-driven interannual variability over the northeast Pacific Ocean

Interannual variability of the sea surface height (SSH) over the northeast Pacific Ocean is hindcast with a reduced-gravity, quasi-geostrophic model that includes linear damping. The model is forced with monthly Ekman pumping fields derived from the NCEP reanalysis wind stresses. The numerical solution is compared with SSH observations derived from satellite altimeter data and gridded at a lateral resolution of 1 degree. Provided that the reduced gravity parameter is chosen appropriately, the results demonstrate that the model has significant hindcast skill over interior regions of the basin, away from continental boundaries. A damping time scale of 2 to 3 years is close to optimal, although the hindcast skill is not strongly dependent on this parameter.A simplification of the quasi-geostrophic model is considered in which Rossby waves are eliminated, yielding a Markov model driven by local Ekman pumping. The results approximately reproduce the hindcast skill of the more complete quasi-geostrophic model and indicate that the interannual SSH variability is dominated by the local response to wind forcing. There is a close correspondence the two leading empirical orthogonal modes of the local model and those of the observed SSH anomalies. The latter account for over half of the variance of the interannual signal over the region.     

The form of the asymptotic depth-limited wind-wave spectrum: Part III — Directional spreading

The directional spreading of both the wavenumber and frequency spectra of finite-depth wind generated waves at the asymptotic depth limit are examined. The analysis uses the Wavelet Directional Method, removing the need to assume a form for the dispersion relationship. The paper shows that both the wavenumber and frequency forms are narrowest at the spectral peak and broaden at wavenumbers (frequencies) both above and below the peak. The directional spreading of the wavenumber spectrum is bi-modal above the spectral peak. In contrast, the frequency spectrum is uni-modal. This difference is shown to be the result of energy in the wind direction being displaced from the linear dispersion shell. A full parametric relationship for the directional spreading of the wavenumber spectrum is developed. The analysis clearly shows that typical dispersion relationships are questionable at high frequencies and that such effects can be significant. This result supports greater attention being focussed on the routine recording of wavenumber spectra, rather than frequency spectra.