Performance of a base isolator with shape memory alloy bars

A new and innovative base isolation device is introduced in this paper based on extensive research carried out by the authors and their co-workers. A prototype of the device was built and experimentally tested on the shaking table. The new base isolation device consists of two disks, one vertical cylinder with an upper enlargement sustained by three horizontal cantilevers, and at least three inclined shape memory alloy (SMA) bars. The role of the SMA bars is to limit the relative motion between the base and the superstructure, to dissipate energy by their super-elastic constitutive law and to guarantee the re-centring of the device. To verify the expected performance, a prototype was built and tested under sinusoidal waves of displacement of increasing frequency with different amplitudes. It is shown that the main feature of the proposed base isolation device is that for cyclic loading, the super-elastic behavior of the alloy results in wide load-displacement loops, where a large amount of energy is dissipated.     

地幔滞弹性对Chandler摆动的影响

基于简正模扰动理论和勒夫数扰动方法,采用Zschau 的地幔流变模型,在假设Chandler摆动的能量全部耗散于地幔滞弹性摩擦的条件下,导出Chandler 摆动Q(Q_w)的理论值.还考虑了滞弹地球的平衡极潮对摆动的影响,所得结果与绝大部分天文实测值非常一致.分析表明.平衡部分的影响大,地幔滞弹性很可能是Chandler 摆动最主要的能量耗散源,Q_w 的理论值约为71.还推算了吸收带模型参数α,研究了该模型的适用性,并讨论了Q_w 与地幔Q(Q_m)的关系.     

强迫耗散非线性系统的局域阻塞流型

本文将正压涡度方程约化为强迫耗散的KdV方程,求得了该方程的一个定常解.这个定常解描述了非绝热加热、耗散、非线性平流和线性频散共同作用所形成的阻塞流型.在确定性初条件、随机性初条件和随机热源扰动的情况下,积分时间大于60天的三组试验表明:该阻塞流型闭合高压中心位置维持定常,而阻高中心强度的演变显示出清晰的准两周或一个月左右的低频振荡现象.     

耗能-隔震柔性底层钢管混凝土-钢筋混凝土组合框架的实验研究

本文用钢管混凝土柱作为结构底层耗能柱、用承重墙和隔震器控制结构底层倒塌破坏,从而提出了一种新的耗能-隔震柔性底层结构体系。通过本文12根钢管混凝土柱和文献[7]中7根钢管混凝土柱的低周疲劳实验,初步确定了钢管混凝土柱地震损伤模型的参数;通过两个钢管混凝土-钢筋混凝土三层框架模型和一个纯钢筋混凝土三层框架模型的拟动力实验,研究和比较了两类结构体系的地震损伤。     

Further Studies Of Atmospheric Turbulence In Layers Near The Surface: Scaling The Tke Budget Above The Roughness Sublayer

The second of two experimental studies of the TKE budget conducted on sites of different roughness is described, and results are compared. The first took place within a shallow layer above a small field of mostly bare, cultivated soil; the second was carried out above a roughness sublayer of significant depth on an extensive plain of tall dry grass. Budget terms observed in the second study were scaled with a modified u which compensated for effects of an unusually large stress gradient and ensured that the _m functions would be collinear. By showing that the modification becomes negligible in smaller gradients, it is demonstrated that in normal conditions, budgets observed above significant roughness sublayers should be normalized by scaling in terms of the unreduced Reynolds stress at the sublayer's upper surface. This procedure is shown to be consistent with the expectation that TKE budgets in layers near the surface all scale in fundamentally the same way.Other findings include: (1) the fact that most _m functions previously reported are not quite collinear is attributed to a type of overspeeding known to affect three-cup anemometers; (2) revised _m functions, collinear and largely free of the effects of overspeeding, are determined from a well-established characteristic of the linear _m relation for the stable case; (3) data that define collinear _m functions can also be represented with single hyperbolic curves; (4) dissipation is found to be 10 to 15% too small to balance total TKE production in unstable and neutral conditions and to decrease with increasing z/L in thestable regime; and (5) new relations for based on the observed behaviour of the dissipation deficit provide an improved closure for the set of equations that express the budget terms as functions of _m and z/L.     

斜拉桥纵向设置粘滞阻尼器参数分析

采用Maxwell阻尼模型模拟了粘滞阻尼器的滞回耗能特性。通过对设置粘滞阻尼器斜拉桥纵向非线性地震反应的分析，讨论了粘滞阻尼器各参数对结构地震响应的影响，并通过计算证实了粘滞阻尼器具有良好的消能减振效果。     

Pure aluminium shear panels as dissipative devices in moment‐resisting steel frames

The use of energy dissipation systems for the seismic control of steel structures represents a valid alternative to conventional seismic design methods. The seismic devices currently employed are mostly based on the metallic yielding technology due to the large feasibility and efficiency they can provide. Within this context, in the current paper an innovative solution based on the adoption of low‐yield‐strength pure aluminium shear panels (SPs) for seismic protection of steel moment‐resisting frames is proposed and investigated. In order to prove the effectiveness of the system, a wide numerical study based on both static and dynamic non‐linear analyses has been carried out, considering a number of different frame‐to‐shear panel combinations, aiming at assessing the effect of the main influential parameters on the seismic response of the structure. The obtained results show that the contribution provided by aluminium SPs is rather significant, allowing a remarkable improvement of the seismic performance of the structure in terms of stiffness, strength and ductility, with the possibility to strongly limit the damage occurring in the members of moment‐resisting frames. In particular, it is clearly emphasized that the stiffening effect provided by SPs allows a more rational design procedure to be adopted, since the serviceability limit state check does not lead to unavoidable and uneconomical increase of the size of main structural members. Copyright © 2007 John Wiley & Sons, Ltd.     

事件层的保存潜力探讨

影响事件层保存潜力的主要因素有 :纯粹的沉积速率、生物成因的混合速率以及机械改造的规模,可以从时间规模 (过渡时间和消除时间 )的角度来考虑事件层保存潜力。基底的机械改造同样对于事件层和正常天气下的沉积物的保存具有重要影响。综合分析影响事件层保存潜力的各种因素表明,在近基的临滨带中、上部及滨外带下部,事件层具有较高的保存潜力,而在近基及远基两端之间的临滨带下部及滨外带上部,事件层保存潜力较低.     

发展“三高”果业需重视大生态系统的耗散协调性──剖析龙泉花果山的大生态环境

发展高产优质高效果业，常会涉及到大生态系统的各类环境因子群。龙泉花果山的大生态系统主要是以风化岩体→紫色土容库→蜜桃等构成的向量大系统的综合反映，并呈现非均衡耗散结构的复杂协调性，这些因素直接制约“三高”果业的发展。