Modélisation de propagation d’écoulement entre lits mineur et majeur sur les fleuves Sénégal et Niger

In the Senegal River valley and Niger Inner Delta, the annual floods inundate a wide floodplain consisting of a complex network of lakes and channels, where topographic information needed by standard hydraulic models is difficult to obtain. To represent the flood propagation between mainstream and floodplain, we use a model designed for flood propagation in river mainstreams with flat bed and large overflow and without topographic data. Depending on the water level in the riverbed, the model calibrated on the levels observed at two stations gives the level in the floodplains and propagation time between stations. Several cases are tested for various types of hydraulic connections between mainstream and floodplain. The model could correctly reproduce the flood rise and fall in the floodplain, even for a lake connected by a single channel to the riverbed or in the case of a strong attenuation of the flood between very distant stations.     

衰减干涉假象的海洋一次波与多次波同时成像方法

海水与空气间的强波阻抗差使得海洋地震资料普遍发育自由表面相关多次波,如何利用好多次波所携带的有效信息已成为提高海洋地震资料成像品质的新突破点.基于面炮偏移的一次波与多次波同时成像方法能够避免多次波预测精度的影响,但是,正向传播的震源子波与反向延拓的自由表面相关多次波所产生的干涉假象严重制约了该技术的应用,本文提出了一种基于单程波偏移算子,可在成像域压制干涉假象的一次波与多次波同时成像方法.其中包含了三个步骤:第一,传统单程波偏移成像方法中的震源子波替换为一次波、多次波与震源子波,初始上行延拓波场为一次波与多次波,基于单程波算子的波场延拓与互相关成像条件的应用得到包含干涉假象的一次波与多次波同时成像;第二,以子波为震源,自由表面相关多次波为记录,按照传统单程波偏移成像方法得到干涉假象;第三,基于最小二乘匹配滤波算法,将第一步的成像结果与第二步的干涉假象进行匹配相减,得到干涉假象衰减后的一次波与多次波同时成像,避开了由于实际资料子波无法准确提取而造成一次波与多次波对成像能量级的不一致性.Sigsbee2B模型测试验证了本方法的有效性,并在我国某探区深海实际资料处理中得到了成功应用,深层基底得到了清晰刻画,并且照明均衡度明显改善.     

Interaction of multiple courses of wave‐induced fluid flow in layered porous media

Different theoretical and laboratory studies on the propagation of elastic waves in layered hydrocarbon reservoir have shown characteristic velocity dispersion and attenuation of seismic waves. The wave‐induced fluid flow between mesoscopic‐scale heterogeneities (larger than the pore size but smaller than the predominant wavelengths) is the most important cause of attenuation for frequencies below 1 kHz. Most studies on mesoscopic wave‐induced fluid flow in the seismic frequency band are based on the representative elementary volume, which does not consider interaction of fluid flow due to the symmetrical structure of representative elementary volume. However, in strongly heterogeneous media with unsymmetrical structures, different courses of wave‐induced fluid flow may lead to the interaction of the fluid flux in the seismic band; this has not yet been explored. This paper analyses the interaction of different courses of wave‐induced fluid flow in layered porous media. We apply a one‐dimensional finite‐element numerical creep test based on Biot's theory of consolidation to obtain the fluid flux in the frequency domain. The characteristic frequency of the fluid flux and the strain rate tensor are introduced to characterise the interaction of different courses of fluid flux. We also compare the behaviours of characteristic frequencies and the strain rate tensor on two scales: the local scale and the global scale. It is shown that, at the local scale, the interaction between different courses of fluid flux is a dynamic process, and the weak fluid flux and corresponding characteristic frequencies contain detailed information about the interaction of the fluid flux. At the global scale, the averaged strain rate tensor can facilitate the identification of the interaction degree of the fluid flux for the porous medium with a random distribution of mesoscopic heterogeneities, and the characteristic frequency of the fluid flux is potentially related to that of the peak attenuation. The results are helpful for the prediction of the distribution of oil–gas patches based on the statistical properties of phase velocities and attenuation in layered porous media with random disorder.     

Directional interpolation of multicomponent data

A method for interpolation of multicomponent streamer data based on using the local directionality structure is presented. The derivative components are used to estimate a vector field that locally describes the direction with the least variability. Given this vector field, the interpolation can be phrased in terms of the solution of a partial differential equation that describes how energy is transported between regions of missing data. The approach can be efficiently implemented using readily available routines for computer graphics. The method is robust to noise in the measurements and particularly towards high levels of low‐frequent noise that is present in the derivative components of the multicomponent streamer data.     

Elastic wave‐vector decomposition in heterogeneous anisotropic media

The goal of wave‐mode separation and wave‐vector decomposition is to separate a full elastic wavefield into three wavefields with each corresponding to a different wave mode. This allows elastic reverse‐time migration to handle each wave mode independently. Several of the previously proposed methods to accomplish this task require the knowledge of the polarisation vectors of all three wave modes in a given anisotropic medium. We propose a wave‐vector decomposition method where the wavefield is decomposed in the wavenumber domain via the analytical decomposition operator with improved computational efficiency using low‐rank approximations. The method is applicable for general heterogeneous anisotropic media. To apply the proposed method in low‐symmetry anisotropic media such as orthorhombic, monoclinic, and triclinic, we define the two S modes by sorting them based on their phase velocities (S1 and S2), which are defined everywhere except at the singularities. The singularities can be located using an analytical condition derived from the exact phase‐velocity expressions for S waves. This condition defines a weight function, which can be applied to attenuate the planar artefacts caused by the local discontinuity of polarisation vectors at the singularities. The amplitude information lost because of weighting can be recovered using the technique of local signal–noise orthogonalisation. Numerical examples show that the proposed approach provides an effective decomposition method for all wave modes in heterogeneous, strongly anisotropic media.     

工具种轮叶黑藻的组织培养与快速繁殖

利用组织培养技术对工具种轮叶黑藻进行快繁研究,建立无菌体系后,在0.5和l倍MS培养液中添加0.5-2mg/L BA及O.1-0.2mg/L IAA进行芽诱导;在0.25、0.5和l倍MS培养液中添加0.1-0.2mg/L LAA进行根诱导.结果发现,1倍MS lmg/LBA 0.1mg/LIAA培养基获得最大芽数及芽生物量,最适合芽诱导;0.5倍Ms O.1mg,LIAA或l倍MS 0.2mg,LIAA培养基最能促进根的发展.芽增殖使轮叶黑藻繁殖效率达每季度1800倍以上;再经根诱导,快速形成完整植株,提高定居能力.在室外水体中以两种密度(100株/m2,320株/m2),三种底质(沙,泥,泥 沙(1:1V/V))上进行移栽,成活率100%.21d后,高密度群落覆盖度大于70%.表明该技术不仅可在短期内获得大量种苗,且种质优,为沉水植被恢复工程奠定关键的基础.     

Variations in the dynamic response of structures founded on piles induced by obliquely incident SV waves

Although the seismic actions generally consist of a combination of waves, which propagates with an angle of incidence not necessarily vertical, the common practice when analyzing the dynamic behavior of pile groups is based on the assumption of vertically incident wave fields. The aim of this paper is to analyze how the angle of incidence of SV waves affects the dynamic response of pile foundations and piled structures. A three-dimensional boundary element-finite element coupling formulation is used to compute impedances and kinematic interaction factors corresponding to several configurations of vertical pile groups embedded in an isotropic homogeneous linear viscoelastic half-space. These results, which are provided in ready-to-use dimensionless graphs, are used to determine the effective dynamic properties of an equivalent single-degree-of-freedom oscillator that reproduces, within the range where the peak response occurs, the response of slender and nonslender superstructures through a procedure based on a substructuring model. Results are expressed in terms of effective flexible-base period and damping as well as maximum shear force at the base of the structure. The relevance and main trends observed in the influence of the wavefront angle of incidence on the dynamic behavior of the superstructure are inferred from the presented results. It is found that effective damping is significantly affected by the variations of the wave angle of incidence. Furthermore, it comes out that the vertical incidence is not always the worst-case scenario.     

Experimental hydrodynamic investigation of a fixed offshore Oscillating Water Column device

Oscillating Water Column (OWC) is one of the pioneer devices in harnessing wave energy; however, it is not fully commercialized perhaps due to the complicated hydrodynamic behavior. Previous studies are significantly devoted to OWC devices located in nearshore and coastal regions where incident wave energy would experience dissipation more than offshore. In this paper, a 1:15 scaled fixed offshore OWC model is tested in a large towing tank of National Iranian Marine Laboratory. Wave spectrum shape effect on the efficiency of the OWC model is addressed. Moreover, the paper investigates the effects of the geometric and hydrodynamic factors on OWC device efficiency and uncovers new points in nonlinear interaction occurring inside the chamber; i.e. sloshing. The results indicate that shape of the spectrum inside the chamber is affected by the type of incident wave spectrum, especially for long waves. Pierson–Moskowitz spectrum leaded to higher efficiency rather than JONSWAP spectrum at longer incident wave periods. According to efficiency analysis, increasing wave height may lead to air leakage from the chamber followed by vortex generation, which is a reason for decreasing the efficiency of the OWC device. Furthermore, no shift in the resonant period of the OWC model, due to wave height increase, was observed at the opening ratios equal or smaller than 1.28%. Spectral analysis of water fluctuation inside the OWC chamber illustrates two modes of sloshing. The first mode can be seen at short period waves while the second mode is visible at long period waves. The sloshing modes approximately vanish by increasing draft value.     

Numerical models for evolution of extreme wave groups

The paper considers the application of two numerical models to simulate the evolution of steep breaking waves. The first one is a Lagrangian wave model based on equations of motion of an inviscid fluid in Lagrangian coordinates. A method for treating spilling breaking is introduced and includes dissipative suppression of the breaker and correction of crest shape to improve the post breaking behaviour. The model is used to create a Lagrangian numerical wave tank, to reproduce experimental results of wave group evolution. The same set of experiments is modelled using a novel VoF numerical wave tank created using OpenFOAM. Lagrangian numerical results are validated against experiments and VoF computations and good agreement is demonstrated. Differences are observed only for a small region around the breaking crest.     

短生命周期海洋涡旋的时空分布特征

中尺度涡旋在海洋中分布广泛,是海洋动力、营养物质等混合和输运的重要途径。统计发现海洋中超过80%的涡旋生命周期不超过1个月,属于本文定义的短生命周期涡旋。本研究采用统计、对比等方法,对全球尺度,较短生命周期涡旋的时空分布特征进行了分析。研究表明,短生命周期涡旋与大洋中环流系统密切相关,其最易发生在暖流和寒流的交汇处以及运动方向相反的两种环流的交汇处,且在除30°S～30°N的热带地区外均表现为气旋式略多于反气旋式。低纬地区,短生命周期涡旋在每年的冷季数量较多,而高纬地区与之相反。除存在大规模东向环流的海域,短生命周期涡旋一般向西迁移,同时气旋式涡旋略倾向于赤道偏转,反气旋式略倾向于极地偏转。短生命周期涡旋的平均位移和平均迁移速率呈相似的赤道对称分布规律。