水面菲涅尔反射对~761 nm叶绿素荧光估算的影响

叶绿素荧光是光合作用的有效探针,可用于海洋浮游植物的监测与定量评估。太阳诱导叶绿素荧光覆盖可见光—近红外650—800 nm,在～685 nm与～740 nm表现出两个形态不同的荧光峰特征。基于～685 nm荧光峰的叶绿素浓度反演算法较为成熟,但在高悬浮物和高叶绿素浓度的水体中,算法的有效性不足。基于叶绿素荧光在氧气吸收谱段(O2-A)的填充作用,水体遥感反射率光谱～761 nm峰值中包含有太阳诱导叶绿素荧光信号,能用于水体叶绿素浓度的估算,但该反射峰形态特征还取决于传感器的光谱分辨率。本研究基于不同光谱分辨率的大气吸收谱线特征,模拟了水体遥感反射率光谱(750—775 nm)上太阳诱导叶绿素荧光的信号响应特征;分析了利用遥感反射率(～761 nm)计算叶绿素荧光的原理,阐明了不同光谱分辨率条件下水体叶绿素荧光信号在反射光谱上的形态变化规律。采用水面以上测量法获取的离水光谱辐亮度,包含了水面的菲涅尔反射信号,由于真实的菲涅尔系数难以准确测量,这给基于～761 nm处遥感反射率峰值的荧光信号估算带来不确定性影响。研究表明,假定菲涅尔系数为0时,虽然～761 nm叶绿素荧光信号与其浓度具有较好的线性统计关系,但却带来较大的不确定性;这种不确定的影响,在低浓度叶绿素水体中表现明显,在高浓度叶绿素水体中,影响相对较小;准确估算菲涅尔系数,有助于减少这种不确定性影响。对基于遥感反射率～761 nm叶绿素荧光信号的深入探讨,将能推动未来水体叶绿素荧光的识别与利用。     

Struts+EJB构架在B/S开发中的应用与改进

讲述了Struts＋EJB构架在B/S开发中的集成使用,介绍了EJB技术、Struts原理及其使用技巧;并总结技术优势.最后通过一个实例,讲述了使用EJB和Struts的方法并对其进行改进.     

Cotton Fiber/ZrO2, A New Material for Adsorption of Cr(VI) Ions in Water

The natural cotton fiber was used to synthesize an anion exchange, containing ZrO₂ film on its surface, NCFZC (natural cotton fiber/ZrO₂ composite). This anion exchanger was produced by the reaction of the zirconium oxychloride and hydroxyl groups on surface of the natural cotton fiber. The material was used for Cr(VI) ions adsorption studies. Adsorption equilibrium time and optimum pH for Cr(VI) adsorption were found to be 6 h and 4.0, respectively. The Langmuir and Temkin isotherms were used to models adsorption equilibrium data. The adsorption capacity of NCFZC was found to be 1.33 mmol/g. Kinetic studies showed that the rate of adsorption of Cr(VI) on NCFZC obeyed a pseudo‐second‐order kinetic model.     

Numerical studies of methane production from Class 1 gas hydrate accumulations enhanced with carbon dioxide injection

Class 1 gas hydrate accumulations are characterized by a permeable hydrate-bearing interval overlying a permeable interval with mobile gas, sandwiched between two impermeable intervals. Depressurization-induced dissociation is currently the favored technology for producing gas from Class 1 gas hydrate accumulations. The depressurization production technology requires heat transfer from the surrounding environment to sustain dissociation as the temperature drops toward the hydrate equilibrium point and leaves the reservoir void of gas hydrate. Production of gas hydrate accumulations by exchanging carbon dioxide with methane in the clathrate structure has been demonstrated in laboratory experiments and proposed as a field-scale technology. The carbon dioxide exchange technology has the potential for yielding higher production rates and mechanically stabilizing the reservoir by maintaining hydrate saturations. We used numerical simulation to investigate the advantages and disadvantages of using carbon dioxide injection to enhance the production of methane from Class 1 gas hydrate accumulations. Numerical simulations in this study were primarily concerned with the mechanisms and approaches of carbon dioxide injection to investigate whether methane production could be enhanced through this approach. To avoid excessive simulation execution times, a five-spot well pattern with a 500-m well spacing was approximated using a two-dimensional domain having well boundaries on the vertical sides and impermeable boundaries on the horizontal sides. Impermeable over- and under burden were included to account for heat transfer into the production interval. Simulation results indicate that low injection pressures can be used to reduce secondary hydrate formation and that direct contact of injected carbon dioxide with the methane hydrate present in the formation is limited due to bypass through the higher permeability gas zone.     

基于核函数NPSSB模型的HY-2A卫星雷达高度计海况偏差研究

利用机器学习的方法,对14个周期HY-2A卫星高度计数据:风速、有效波高和海面高度差值进行训练,探究海况偏差和风速、有效波高之间的关系,创建海况偏差核函数非参数模型(NPSSB),并与参数模型中具有代表性的BM3、BM4模型进行对比。研究表明:(1)核函数NPSSB模型能够很好的反映SSB与U、SWH之间的关系,SSB与U呈二次函数关系,SSB与SWH呈反比例函数关系;(2)核函数NPSSB模型对SSB的模拟能力与训练数据集相关,数据量越多,模拟能力越好;(3)核函数NPSSB模型与BM3、BM4模型都存在0～-0.03 m的差值,随着风速和有效波高的增加,差值的绝对值越大。     

2D Self-Potential tomographies for studying groundwater flows in the Varco d''Izzo landslide (Basilicata, southern Italy)

A geoelectrical monitoring activity has been carried out to improve the geological and hydrogeological knowledge about the Varco d'Izzo landslide (Potenza, Basilicata, Southern Apennine, Italy), an active rotational–translational slide evolved in earth-flow. In this work we have focused on the Self-Potential (SP) method by applying three different SP measuring techniques and combining modern technologies for data acquisition and new methods for tomographic inversion. A SP map and three static SP tomographies have been carried out to better analyse the groundwater circulation system and to better reconstruct the geometry of the landslide body. In the accumulation zone, which is the area more exposed to the geomorphological activity, a new SP measuring strategy has been applied. This strategy, based on time-continuous 2D SP tomographies, helps identify water flow changes in subsurface by studying the time series of SP tomographic images. The analysis of time-dependent changes of water infiltration in near surface is the key to better understand the hydrogeological processes underlying the ground instability phenomena. The time-lapse analysis of tomographic images has allowed us not only to investigate the correlation between the temporal changes of SP signals and rainfall events, but also to quantify the range of these changes. The modification of the distribution of the SP source accumulation zones is associated with the dynamics of the groundwater flows. These preliminary results allow us to consider the SP tomographic method as a tool for geophysical monitoring of landslide areas and encourage to develop new measuring systems for near-real time applications.     

Reducing global GHG emissions by replicating successful sector examples: the ‘good practice policies’ scenario

This article shows the potential impact on global GHG emissions in 2030, if all countries were to implement sectoral climate policies similar to successful examples already implemented elsewhere. This assessment was represented in the IMAGE and GLOBIOM/G4M models by replicating the impact of successful national policies at the sector level in all world regions. The first step was to select successful policies in nine policy areas. In the second step, the impact on the energy and land-use systems or GHG emissions was identified and translated into model parameters, assuming that it would be possible to translate the impacts of the policies to other countries. As a result, projected annual GHG emission levels would be about 50 GtCO₂e by 2030 (2% above 2010 levels), compared to the 60 GtCO₂e in the ‘current policies’ scenario. Most reductions are achieved in the electricity sector through expanding renewable energy, followed by the reduction of fluorinated gases, reducing venting and flaring in oil and gas production, and improving industry efficiency. Materializing the calculated mitigation potential might not be as straightforward given different country priorities, policy preferences and circumstances.

Key policy insights

• Considerable emissions reductions globally would be possible, if a selection of successful policies were replicated and implemented in all countries worldwide.

• This would significantly reduce, but not close, the emissions gap with a 2°C pathway.

• From the selection of successful policies evaluated in this study, those implemented in the sector ‘electricity supply’ have the highest impact on global emissions compared to the ‘current policies’ scenario.

• Replicating the impact of these policies worldwide could lead to emission and energy trends in the renewable electricity, passenger transport, industry (including fluorinated gases) and buildings sector, that are close to those in a 2°C scenario.

• Using successful policies and translating these to policy impact per sector is a more reality-based alternative to most mitigation pathways, which need to make theoretical assumptions on policy cost-effectiveness.

     

1991-2010年中国大陆化石能源消费的CO2排放研究（英文）

本文采用IPCC推荐的表观消费量法计算了中国大陆30省区1991到2010年化石能源消费产生的CO2排放,发现:(1)排放总量由 2293.01Mt 增长到 7467.77Mt;(2)煤炭消费的排放比重最高达到79.98%;(3)人均排放量由 1.98t 增长至 5.57t;(4)CO2排放强度显著降低,由6.66 kg USD-1降至1.07kg USD-1,近年来趋于稳定;(5)区域发展不平衡始终存在,根据省际数据,在一些落后地区经济增长过度依赖于化石能源消费。关于CO2高排放,中国已经做出承诺并采取了行动。基于对可持续发展和全球气候变化不确定性的综合考虑,健康的产业结构、化石能源集约利用,以及区域发展平衡应更加受到重视。