Gravity field and tectonic features of Block L2 in the Lamu basin,Kenya

A gravity survey on the scale of 1: 250 000 was carried out in Block L2 located in the Lamu basin of south‐east Kenya in order to study tectonic features and find out favourable petroleum prospects in the block. This paper, through data processing and synthetic interpretation of the measured gravity data in the block, discusses characteristics of the gravity field and their geological implications, determines the fault system and the basement depth, analyses features of the main strata, divides structure units and predicts favourable petroleum zones. In the block, the regional gravity anomaly is mainly caused by the inclined Moho surface that rises in the east and subsides in the west topographically and the Bouguer gravity anomaly primarily reflects the superimposition of the gravity effect derived from the Moho surface and the basement relief. Two groups of faults extending NW (NWW) and NE (NEE) respectively are dominant in the block and their activities resulted in the framework of east‐west zoning and south‐north blocking. The basement depth greatly changes in an alternative high and low pattern. The Permian‐Triassic, Jurassic and Tertiary strata are extensively developed, while the Cretaceous is only developed in the east of the block. Structurally, the block can be divided into five units, of which the Tana sag shows excellent source‐reservoir‐seal associations and is a favourable target for future petroleum exploration.     

基于逆算子估计的AVO反演方法研究

传统反演算法以优化算法为主,而基于逆算子估计的AVO反演算法则利用了直接求逆的思路.算法的关键在于寻找存在逆函数的子域,进而可以在子域内直接求逆,这种解决反问题的思路不同于一般的优化类算法所采用的直接搜索解的方式,具有更高的效率.AVO反演利用了振幅随着偏移距的变化特征,反演的精度受到地震资料质量的影响,通过加入L1范数约束以及合理的初始模型有助于提高反演的稳定性以及准确度.模型测算和实际应用表明,基于逆算子估计的AVO反演方法具有较高的精确程度和可靠性.     

Response Surface Optimization for Removal of Cadmium from Aqueous Solution by Waste Agricultural Biosorbent Psidium guvajava L. Leaf Powder

Response surface methodology (RSM) was applied to study the combined effects of the various parameters namely, pH, biosorbent dosage, cadmium concentration and temperature, and to optimize the process conditions for the maximum removal of cadmium using Psidium guvajava L. leaf powder. In order to obtain the mutual interactions between the variables and to optimize these variables, a 2⁴ full factorial central composite design using RSM was employed. The analysis of variance (ANOVA) of the quadratic model demonstrates that the model was highly significant. The model was statistically tested and verified by experimentation. A maximum cadmium removal of 93.2% was obtained under the following optimum conditions: aqueous cadmium concentration 40.15 mg/L, adsorbent dosage 0.5 g/50 mL solution, pH 5.0, and temperature (35°C). The value of desirability factor obtained was 1.     

井间地震串联滤波波场分离方法

本文根据井间地震波场响应以及多种波场分离方法的性能，采用基于Ｋ－Ｌ变换的特征向量滤波与中值滤波相结合的串联滤波方法分离井间地震观测到的上、下行反射波。数值计算结果表明：在波场分离过程中，由于同时综合考虑了地震波能量主分量分布以及反射波同相轴时差两个参数，使得分离效果明显、处理更为简便，具有滤波特征矢量的选取条件更为宽松、无需精确确定拉平轴的时间等特点。     

Conceptualizing multiple clusters in mega-city regions: The case of the biomedical industry in Beijing

This paper introduces a unique industrial configuration that has emerged in Beijing, where three economic clusters in the biomedical industry, originally established as industrial/research parks, have developed parallel to each other. This configuration of multiple co-located clusters of the same industry, which has not been discussed before, raises the question of whether the industrial/research parks are competing for the same resources, or whether they are complementary to each other and can collectively be viewed as a new type of industrial configuration. The paper conceptualizes a framework of multiple clusters in mega-city regions that distinguishes between collaborating and competing clusters and presents initial empirical evidence for the Beijing case. As such, this research aims to unravel the phenomenon of multiple clusters in mega-city regions and to understand the complex spatial interrelationships that exist within and beyond multiple co-located clusters in the same industry.     

统一分布下的LP估计抗差测度

本文根据定位参数Ｍ估计理论,导出了ＬＰ估计的影响函数,分析了ＬＰ估计的抗差能力,同时还推导了ＬＰ估计的渐近效率,综合抗差能力和效率,分析了ＬＰ估计的优劣性,明确指出,用现测数据中含有粗差扰动的数据和Ｐ为（１,１．２５）的ＬＰ估计进行处理,结果较优,效率较高。     

陕西略阳煎茶岭金矿床成矿作用探讨

煎茶岭金矿床位于勉略宁三角区东北缘,矿体产于环绕超基性岩体分布的含金蚀变带中,属蚀变岩型矿床。由于对其成矿作用认识分歧较大,严重影响了后续的找矿勘探工作。从矿床地质特征入手,通过矿区岩矿石常量元素、微量元素、稀土元素以及硫、氢、氧同位素的测试分析,探讨其控矿因素和成矿机理。结果表明,矿床受叠加于接触带部位的韧脆性剪切带控制,成矿不仅与超基性岩有关,而且与花岗斑岩关系密切。花岗斑岩的侵入引起超基性岩的彻底蚀变,同时导致原岩中的金等成矿物质被释放出来。矿石、蚀变超基性岩、白云岩中黄铁矿的硫同位素组成与花岗斑岩中黄铁矿的硫同位素组成具有较好的一致性,并表现出一定的规律性,说明花岗斑岩提供了成矿所需的硫;矿石氢、氧同位素组成介于岩浆水与大气降水之间,且多数样品聚集在雨水线附近,暗示花岗斑岩提供了初始热液,随着成矿作用的进行,大气降水不断加入,从而形成复合热液。鉴于矿床与花岗斑岩的密切关系以及铬云母化的产出特点,根据同位素年龄,认为矿床形成于印支中期—燕山中期。     

南极三块（L3）陨石球粒结构类型及其矿物学物征

我国第16次南极考察队回收到6块稀少种类陨石-13型,GRV99001,GRV99019,GRV99020,GRV99021,GRV99022,GRV99026。本文对其中3块陨石进行研究,研究它们的球粒结构和矿物化学成分．它们虽然部属于非平衡普通球粒陨石（L3）,但它们的亚类不同,GRV99001为13．4,GRV99026为L3．5,GRV99019为L3．6．它们的球粒结构和球粒内的矿物晶体完整性和矿物组合变化比较大．橄榄石和辉石以高镁为特征．这三块陨石的球粒结构种类比较多．有班状的、炉条状的、扇形的和隐晶质的等．在GRV99001陨石中班状结构的球粒内能见到一个或两个以上完整的单晶橄榄石构成的球粒,也能见到多个细小的或是破碎橄榄石,被包襄在辉石晶体内．而在GRV99019和GRV99026陨石中只能见到多个细小单晶体或是破碎的橄榄石晶体．GRV99001陨石的炉条状结构,好象是由一条带状长石矿物,穿插在单个橄榄石晶体中构成．扇形和伞形结构的球粒,以一个点为中心,向外放射呈扇形．如GRV99019陨石中扇形结构球粒,它们是以辉石为主,陨硫铁充填在低钙辉石缝隙中,形成扇形．另一种是以多个点为中心,如GRV99001陨石,它们是由橄榄石、低钙辉石和长石质的玻璃．构成多个小伞形,形状类似三维立体的球,裂缝中也充填有金属矿物．隐晶质的球粒在GRV99026陨石中有两种,一种是在一厘米等于100un时呈现隐晶质矿物,而放大到一厘米等于5un时,就可以清楚看到两种低钙辉石矿物,在低钙辉石中还有金属矿物．另一种隐晶质结构球粒由极细小破碎的橄榄石和辉石矿物构成．这三块陨石中的橄榄石和辉石都以高镁为特征．班状结构球粒,在GRV99001陨石中橄榄石的MgO～33．37～51．21,辉石为35．9～36．61;GRV99019陨石中橄榄石23．33～56．58．辉石21.38-33.07,GRV99026陨石中榄橄榄石45.91-52.63,辉石34.48-37.35,扇形结构球粒,在GRV99001陨石中橄榄石29.94-46.22,辉石28.17-30.36;GRV99019陨石中橄榄石29.17-34.38,辉石23.11-27.79,炉条状结构的球粒,在GRV99001陨石中橄榄石51.84-56.03,隐晶质结构球粒,在GRV99026陨石中辉石20.17-21.54,橄榄石30.84-32.66,由此看出矿物晶体完整性越好镁的含量越高。     

贵州省的亚洲象(Elephas maximus L.)和其它脊椎动物化石

本文报导的亚洲象化石,发现于贵州铜仁,代表这一物种在该省地层中的首例记录。在我国,贵州是以脊椎动物化石丰富和重要而称著的省份之一,但文献不集中,参考不便利。为此,作者集中了该省全部属类及其地质地理分布的主要资料,并讨论了相关问题,以冀为该省的进一步发现或研究提供一个初步的基础。