Structure of Palaeogene sediments in east Ellesmere Island: Constraints on Eurekan tectonic evolution and implications for the Nares Strait problem

The “Nares Strait problem” represents a debate about the existence and magnitude of left-lateral movements along the proposed Wegener Fault within this seaway. Study of Palaeogene Eurekan tectonics at its shorelines could shed light on the kinematics of this fault. Palaeogene (Late Paleocene to Early Eocene) sediments are exposed at the northeastern coast of Ellesmere Island in the Judge Daly Promontory. They are preserved as elongate SW–NE striking fault-bounded basins cutting folded Early Paleozoic strata. The structures of the Palaeogene exposures are characterized by broad open synclines cut and displaced by steeply dipping strike-slip faults. Their fold axes strike NE–SW at an acute angle to the border faults indicating left-lateral transpression. Weak deformation in the interior of the outliers contrasts with intense shearing and fracturing adjacent to border faults. The degree of deformation of the Palaeogene strata varies markedly between the northwestern and southeastern border faults with the first being more intense. Structural geometry, orientation of subordinate folds and faults, the kinematics of faults, and fault-slip data suggest a multiple stage structural evolution during the Palaeogene Eurekan deformation: (1) The fault pattern on Judge Daly Promontory is result of left-lateral strike-slip faulting starting in Mid to Late Paleocene times. The Palaeogene Judge Daly basin formed in transtensional segments by pull-apart mechanism. Transpression during progressive strike-slip shearing gave rise to open folding of the Palaeogene deposits. (2) The faults were reactivated during SE-directed thrust tectonics in Mid Eocene times (chron 21). A strike-slip component during thrusting on the reactivated faults depends on the steepness of the fault segments and on their obliquity to the regional stress axes.Strike-slip displacement was partitioned to a number of sub-parallel faults on-shore and off-shore. Hence, large-scale lateral movements in the sum of 80–100 km or more could have been accommodated by a set of faults, each with displacements in the order of 10–30 km. The Wegener Fault as discrete plate boundary in Nares Strait is replaced by a bundle of faults located mainly onshore on the Judge Daly Promontory.     

Source-area controls on the composition of beach and fluvial sands on the southern side of the Gibraltar Strait and Western Alboran Sea (Flysch Basin, Internal and External, Domains, Northern Rif Chain)

The southern side of Gibraltar and the Western Alboran Sea of the northern Rif coasts and rivers provide a natural field laboratory for sampling modern sand at different scales: small catchment basins (first order) and rivers draining mountain belts (second order). The Rifian chain represents a deformed and uplifted thrust-belt and related forelands composed of Palaeozoic nappes, metamorphic and plutonic basement, and their sedimentary Mesozoic and Cenozoic siliciclastic and carbonate cover, respectively. The present physiography of the Rif Chain is shaped by a rugged mountainous relief drained by different scale catchment basins that supply the nearby coastal and marine deep-sea environments. The analysis of the composition of modern fluvial and beach sands is useful for the interpretation of transported sediments by surface processes from the continent toward coasts and later to deep-water environments.Modern beach and fluvial sands of the southern side of Gibraltar and the Western Alboran Sea display three distinct petrologic littoral provinces, from the east to the west and from the north to the south, respectively, designated as: (i) the Tangier–Bel Younech Littoral Province with 90% of sand derived from erosion of Flysch Nappes (Flysch Basin Domain); (ii) the Bel Younech–Sebta Littoral Province with 64% of sand fed mainly by the metamorphic Units of Upper Sebtides and (iii) the Sebta–Ras Mazari Littoral Province with 74% of sand supplied from the epimetamorphic Palaeozoic Ghomaride Nappes and Alpine cover rather than Mesozoic and Cenozoic sedimentary successions of the “Dorsale Calcaire” Units. Comparison of detrital modes of fluvial and coastal marine environments highlights their dispersal pathways and drainage patterns of actualistic sand petrofacies.     

Linking invertebrate burrow distributions (neoichnology) to physicochemical stresses on a sandy tidal flat: implications for the rock record

Invertebrate burrow distributions (neoichnology) across a modern tidal flat are presented as an analogue for interpreting the ichnology of palaeo‐tidal‐flat successions. Burrow distributions are linked to physical and chemical (physicochemical) stresses to establish the main controls on the distribution of biosedimentary structures. Across the tidal flat, there is clear heterogeneity in both the diversity of traces and the intensity of burrowing. This heterogeneity reflects a myriad of physicochemical stresses, with the sedimentation rate dominating burrow distributions. Across all substrates, the total area occupied by organisms rarely exceeds 3% of the tidal‐flat surface, and is commonly <1%; this equates to a bioturbation index value of one. To reach bioturbation index values of two to six, sediments must be available to biogenic reworking and/or recolonization. With an increasing sedimentation rate, substrates are rapidly buried and re‐exposed, which limits the time when a substrate is available to colonization. For palaeo‐ichnological studies, this research presents several key results. (i) Burrow cross‐cutting relationships in tidal‐flat successions commonly reflect natural heterogeneities in the areal distribution of infaunal communities, rather than infaunal tiering. (ii) Ichnofabric analysis of palaeo‐tidal flats with a high sedimentation rate would yield fabrics that reflect heterogeneities in the areal distribution of infaunal communities rather than variability in the physicochemical stresses of the environment. (iii) The composite trace‐fossil assemblage of tidal flats cannot be attributed to a single ichnofacies, but instead comprises elements typical of multiple ichnofacies. (iv) The main controls on trace assemblages across tidal flats in fully marine settings are sedimentological and include the sedimentation rate and, to a lesser extent, grain size.     

Holocene activity of the Scilla Fault, Southern Calabria: Insights from coastal morphological and structural investigations

Integration of on-land and offshore geomorphological and structural investigations coupled to extensive radiometric dating of co-seismically uplifted Holocene beaches allows characterization of the geometry, kinematics and seismotectonics of the Scilla Fault, which borders the eastern side of the Messina Strait in Calabria, Southern Italy. This region has been struck by destructive historical earthquakes, but knowledge of geologically-based source parameters for active faults is relatively poor, particularly for those running mostly offshore, as the Scilla Fault does. The  30 km-long normal fault may be divided into three segments of  10 km individual length, with the central and southern segments split in at least two strands. The central and northern segments are submerged, and in this area marine geophysical data indicate a youthful morphology and locally evidence for active faulting. The on-land strand of the western segment displaces marine terraces of the last interglacial (124 to 83 ka), but seismic reflection profiles suggest a full Quaternary activity. Structural data collected on bedrock faults exposed along the on-land segment provide evidence for normal slip and  NW-SE extension, which is consistent with focal mechanisms of large earthquakes and GPS velocity fields in the region. Detailed mapping of raised Holocene marine deposits exposed at the coastline straddling of the northern and central segments supplies evidence for two co-seismic displacements at  1.9 and  3.5 ka, and a possible previous event at  5 ka. Co-seismic displacements show a consistent site value and pattern of along-strike variation, suggestive of characteristic-type behaviour for the fault. The  1.5–2.0 m average co-seismic slips during these events document M_e  6.9–7.0 earthquakes with  1.6–1.7 ka recurrence time. Because hanging-wall subsidence cannot be included into slip magnitude computation, these slips reflect footwall uplift, and represent minimum average estimates. The palaeoseismological record based on the palaeo-shorelines suggests that the last rupture on the Scilla Fault during the February 6, 1783 M_w = 5.9–6.3 earthquake was at the expected time but it may have not entirely released the loaded stress since the last great event at  1.9 ka. Comparison of the estimated co-seismic extension rate based on the Holocene shoreline record with available GPS velocities indicates that the Scilla Fault accounts for at least  15–20% of the contemporary geodetic extension across the Messina Strait.     

Late Quaternary contourites and glaciomarine sedimentation in the Fram Strait

Two sites in the eastern Fram Strait, the Vestnesa Ridge and the Yermak Plateau, have been surveyed and sampled providing a depositional record over the last glacial‐interglacial cycle. The Fram Strait is the only deep‐water connection from the Arctic Ocean to the North Atlantic and contains a marine sediment record of both high latitude thermohaline flow and ice sheet interaction. On the Vestnesa Ridge, the western Svalbard margin, a sediment drift was identified in 1226 m of water. Gravity and multicores from the crest of the drift recovered turbidites and contourites. ¹⁴C dating indicates an age range of 8287 to 26 900 years BP (Early Holocene to Late Weichselian). The Yermak Plateau is characterized by slope sediments in 961 m of water. Gravity and multicores recovered contourites and hemipelagites. ¹⁴C ages were between 8615 and 46 437 years BP (Early Holocene to mid‐Weichselian). Downcore dinoflagellate cyst analyses from both sites provide a record of changing surface water conditions since the mid‐Weichselian, suggesting variable sea ice extent, productivity and polynyas present even during the Last Glacial Maximum. Four layers of ice‐rafted debris were also identified and correlated within the cores. These events occurred ca at 9, 24 to 25, 26 to 27 and 43 ka, asynchronous with Heinrich layers in the wider north‐east Atlantic and here interpreted as reflecting instability in the Svalbard/Barents Ice sheet and the northward advection of warm Atlantic water during the Late Weichselian. The activity of the ancestral West Spitsbergen Current is interpreted using mean sortable silt records from the cores. On the Vestnesa Ridge drift the modern mass accumulation rate, calculated using excess ²¹⁰Pb, is 0·076 g cm^?2 year^?1. On the Yermak Plateau slope the modern mass accumulation rate is 0·053 g cm^?2 year^?1.     

Initiation and development of pull-apart basins with Riedel shear mechanism: insights from scaled clay experiments

Typical pull-apart structures were created in scaled clay experiments with a pure strike-slip geometry (Riedel type experiments). A clay slab represents the sedimentary cover above a strike-slip fault in the rigid basement. At an early stage of the development of the deformation zone, synthetic shear fractures (Riedel shears) within the clay slab display dilatational behaviour. With increasing basal displacement the Riedel shears rotate and open further, developing into long, narrow and deep troughs. The shear displacement and the low angle with the prescribed principal basal fault set them apart from tension gashes. At a more evolved stage, synthetic segments (Y-shears) parallel to the basal principal fault develop and accommodate progressive strike-slip deformation. The Y-shears connect the tips of adjacent troughs developed from the earlier Riedel shears, resulting in the typical rhomb-shaped structures characteristic for pull-apart basins. The Strait of Sicily rift zone, with major strike-slip systems being active from the Miocene to the Present, comprises pull-apart basins at different length scales, for which the structural record suggests development by a mechanism similar to that observed in our experiments.     

渤海海峡跨海通道工程区地震危险性分析

研究渤海海峡地区区域历史地震时空分布特征,分析渤海海峡地区的地震发生位置及其发震规律,论述历史地震对工程场地的影响,为渤海海峡跨海通道的选址提供依据,使选址时尽量避开活动断层以减少地震对跨海通道的影响,增加评判工程稳定性的因子,使评判结论更加可靠。     

渤海海峡BHS01孔沉积物磁性地层学研究

磁性地层学研究是建立渤海地区第四纪沉积序列地层年代框架的主要技术手段之一。通过对渤海海峡地区BHS01孔(孔深121.3 m)进行详细的磁性地层学研究,结果表明:BHS01孔岩心记录了布容(Brunhes)正极性时至松山(Matuyama)负极性时底部,包括贾拉米洛(Jaramillo)和奥尔都维(Olduvai)正极性亚时。早、中更新世界线即布容(Brunhes)正极性时/松山(Matuyama)负极性时界限(B/M)深度位于该钻孔的46.4 m处。根据沉积速率,推测钻孔底部121.3 m处的年龄约2.25 Ma。综合沉积物的岩性、磁性及沉积速率变化特征,将BHS01孔沉积物记录的区域沉积过程自下而上划分为3个阶段:阶段Ⅰ(2.25～1.46 Ma)以河流相沉积为主;阶段Ⅱ(1.46～0.78 Ma)为稳定的湖泊相沉积;阶段Ⅲ(0.78～0 Ma)发育海陆交互相沉积。这一研究为该钻孔提供了可靠的年代标尺,为渤海海峡及邻区第四纪地层的划分对比和沉积演化过程提供了新的依据。     

Eustatic and tectonic controls on Quaternary Ras Leona marine terraces (Strait of Gibraltar, northern Morocco)

Well-preserved Quaternary staircased marine terraces appear on Ras Leona limestone relief. This is a peculiar sector of the Betic-Rif Cordillera, lying in the four-way junction between the Atlantic and the Mediterranean, and Europe and Africa. The age and altitude correlation of the Ras Leona terraces with travertine-covered lateral equivalent terraces fashioned in the neighbouring Beni Younech area, and comparison with those along the Moroccan Atlantic coasts, would suggest that the Ras Leona terraces were mainly formed by eustatic factors. The importance of the eustasy is supported by further comparisons with Spanish and Moroccan Mediterranean terraces and with different marine terraces developed on passive-margin coasts around the world. A tectonic event occurred mainly during the period between the formation of the Maarifian and the Ouljian terraces (i.e., between 370 and 150 ka). The moderate Quaternary tectonic uplift deduced from the marine terraces and its comparison with uplifted marine terraces developed in active subduction setting disagrees with the model of an active eastwards subduction below the Gibraltar tectonic arc.     

Tide,Wind, and River Forcing of the Surface Currents in the Fraser River Plume

A long-term record of surface currents from a high-frequency radar system, along with near-surface hydrographic transects, moored current meter records, and satellite imagery, are analyzed to determine the relative importance of river discharge, wind, and tides in driving the surface flow in the Fraser River plume. The observations show a great deal of oceanographic and instrumental variability. However, averaged quantities yielded robust results. The effect of river flow, which determines buoyancy and inertia near the river mouth, was found by taking a long-term average. The resulting flow field was dominated by a jet with two asymmetric gyres; the anticyclonic gyre to the north had flow speeds consistent with geostrophy. The mean flow speed near the river mouth was 14.3?cm?s^–1, while the flow further afield was 5?cm?s^–1 or less. Wind stress and surface currents were highly coherent in the subtidal frequency band. Northwesterly winds drive a surface flow to the southeast at speeds of nearly 30?cm?s^–1. Southeasterly winds drive a surface flow to the northwest at speeds reaching 20?cm?s^–1; however, there is more spatial variability in speed and direction relative to the northwesterly wind case. A harmonic analysis was used to extract the tidally driven flows. Ellipse parameters for the major tidal constituents varied considerably in both alignment and aspect ratio over the radar domain, in direct contrast to a barotropic model which predicted rectilinear flow along the Strait of Georgia. This is a result of water filling and draining the shallow mud flats north of the Fraser's main channel. The M₂ velocities at the surface were also weaker than their barotropic counterparts. However, the shallow water constituent MK₃ was enhanced at the surface and nearly as strong as the mean flow, implying that non-linear interactions are important to surface dynamics.