Exhumation Paths of High-Pressure-Low-Temperature Metamorphic Rocks from the Lycian Nappes and the Menderes Massif (SW Turkey): a Multi-Equilibrium Approach

The Menderes Massif and the overlying Lycian Nappes occupy anextensive area of SW Turkey where high-pressure–low-temperaturemetamorphic rocks occur. Precise retrograde P–T pathsreflecting the tectonic mechanisms responsible for the exhumationof these high-pressure–low-temperature rocks can be constrainedwith multi-equilibrium P–T estimates relying on localequilibria. Whereas a simple isothermal decompression is documentedfor the exhumation of high-pressure parageneses from the southernMenderes Massif, various P–T paths are observed in theoverlying Karaova Formation of the Lycian Nappes. In the uppermostlevels of this unit, far from the contact with the MenderesMassif, all P–T estimates depict cooling decompressionpaths. These high-pressure cooling paths are associated withtop-to-the-NNE movements related to the Akçakaya shearzone, located at the top of the Karaova Formation. This zoneof strain localization is a local intra-nappe contact that wasactive in the early stages of exhumation of the high-pressurerocks. In contrast, at the base of the Karaova Formation, alongthe contact with the Menderes Massif, P–T calculationsshow decompressional heating exhumation paths. These paths areassociated with severe deformation characterized by top-to-the-eastshearing related to a major shear zone (the Gerit shear zone)that reflects late exhumation of high-pressure parageneses underwarmer conditions. KEY WORDS: exhumation; high-pressure–low-temperature metamorphism; multi-equilibrium P–T estimates; Lycian Nappes; Menderes Massif     

CT技术在土体结构性分析中的应用初探

提出了一种利用 Ｃ Ｔ 技术定量评价黄土结构性的方法。利用该方法对不同压实度的黄土进行了初始扫描,并从 Ｃ Ｔ 数和 Ｃ Ｔ 图像两方面分析压实黄土的初始结构,得到一些有益的结果。     

Structural kinematics,metamorphic P–T profiles and zircon geochronology across the Greater Himalayan Crystalline Complex in south‐central Tibet: implication for a revised channel flow

A specific question about the Himalayas is whether the orogeny grew by distributed extrusion or discrete thrusting. To place firm constraints on tectonic models for the orogeny, kinematic, thermobarometric and geochronological investigations have been undertaken across the Greater Himalayan Crystalline Complex (GHC) in the Nyalam region, south‐central Tibet. The GHC in this section is divided into the lower, upper and uppermost GHC, with kinematically top‐to‐the‐south, alternating with top‐to‐the‐north shear senses. A new thrust named the Nyalam thrust is recognized between the lower and upper GHC, with a 3 kbar pressure reversion, top‐to‐the‐south thrust sense, and was active after the exhumation of the GHC. Peak temperature reached ～749 °C in the cordierite zone, and decreased southwards to 633–667 °C in the kyanite and sillimanite‐muscovite zones, and northwards to greenschist facies at the top of the South Tibetan Detachment System (STDS). Pressure at peak temperature reached a maximum value in the kyanite zone of 9.0–12.6 kbar and decreased northwards to ～4.1 kbar in the cordierite zone. Zircon U‐Pb ages of a sillimanite migmatite and an undeformed leucogranite dyke cutting the mylonitized rocks in the STDS reveal a long‐lived partial melting of the GHC, which initiated at 39.7–34 Ma and ceased at 14.1 Ma. Synthesizing the obtained and collected results, a revised channel flow model is proposed by considering the effect of heat advection and convection by melt and magma migration. Our new model suggests that distributed processes like channel flow dominated during the growth of the Himalayan orogen, while discrete thrusting occurred in a later period as a secondary process.     

Metamorphic petrology and zircon geochronology of high-grade rocks from the central Mozambique Belt of Tanzania: crustal recycling of Archean and Palaeoproterozoic material during the Pan-African orogeny

New data on the metamorphic petrology and zircon geochronology of high‐grade rocks in the central Mozambique Belt (MB) of Tanzania show that this part of the orogen consists of Archean and Palaeoproterozoic material that was structurally reworked during the Pan‐African event. The metamorphic rocks are characterized by a clockwise P–T path, followed by strong decompression, and the time of peak granulite facies metamorphism is similar to other granulite terranes in Tanzania. The predominant rock types are mafic to intermediate granulites, migmatites, granitoid orthogneisses and kyanite/sillimanite‐bearing metapelites. The meta‐granitoid rocks are of calc‐alkaline composition, range in age from late Archean to Neoproterozoic, and their protoliths were probably derived from magmatic arcs during collisional processes. Mafic to intermediate granulites consist of the mineral assemblage garnet–clinopyroxene–plagioclase–quartz–biotite–amphibole ± K‐feldspar ± orthopyroxene ± oxides. Metapelites are composed of garnet‐biotite‐plagioclase ± K‐feldspar ± kyanite/sillimanite ± oxides. Estimated values for peak granulite facies metamorphism are 12–13 kbar and 750–800 °C. Pressures of 5–8 kbar and temperatures of 550–700 °C characterize subsequent retrogression to amphibolite facies conditions. Evidence for a clockwise P–T path is provided by late growth of sillimanite after kyanite in metapelites. Zircon ages indicate that most of the central part of the MB in Tanzania consists of reworked ancient crust as shown by Archean (c. 2970–2500 Ma) and Palaeoproterozoic (c. 2124–1837 Ma) protolith ages. Metamorphic zircon from metapelites and granitoid orthogneisses yielded ages of c. 640 Ma which are considered to date peak regional granulite facies metamorphism during the Pan‐African orogenic event. However, the available zircon ages for the entire MB in East Africa and Madagascar also document that peak metamorphic conditions were reached at different times in different places. Large parts of the MB in central Tanzania consist of Archean and Palaeoproterozoic material that was reworked during the Pan‐African event and that may have been part of the Tanzania Craton and Usagaran domain farther to the west.     

Node-centered finite volume discretizations for the numerical simulation of multiphase flow in heterogeneous porous media

Three node-centered finite volume discretizations for multiphase porous media flow are presented and compared. By combination of these methods two additional discretization methods are generated. The ability of these schemes to describe flows at textural interfaces of different geologic formations is investigated. It was found that models with nonzero-entry pressures for the capillary pressure-saturation relationship in conjunction with the Box discretization may give rise to spurious oscillations for flows around low permeable lenses. Furthermore, the applicability and sensitivity of the discretization methods with regard to the used computational grids is discussed. The schemes are used for the numerical study of two-phase flow in porous media with zones of different material properties. This revised version was published online in July 2006 with corrections to the Cover Date.     

Magnetostratigraphic Study of Meishan Permian-Triassic Section, Changxing, Zhejiang Province, China

INTRODUCTIONBecause many P/ T boundary sections around the worldare stratigraphically unconformed,som e possible exceptionsdeveloped in Greenland,Iran,Russia and South China are ofcourse of international importance.Especially successive sedi-ments from the L ate Paleozoic to Early Mesozoic widely ap-peared in South China,for example,the Meishan Section inChangxing County,Zhejiang Province,and som e analogies inGuangyuan,Wulong and Shangsi counties,Sichuan Province.Some geologists…     

云南鹤庆炉坪金多金属矿床地质特征及成因分析

矿床成矿物质源于斑岩及斑岩期后的岩浆热液,经内生成矿阶段的原生富集作用和表生成矿阶段的富集作用,逐步在相对有利的地质和地球化学环境构造部位富集成矿,属斑岩型中低温外接触带沿层破碎带型原生及氧化Fe-Au多金属矿床。     

剑川麻栗箐铜铁矿地质特征及找矿方向

矿化体受区域构造断裂控制,矿床类型为中低温热液脉状铜铁矿床。地、物、化、遥综合研究显示,该区具有良好的成矿地质条件,有望进一步发展成为一个铜、铁矿的勘查开发区。     

Lithostratigraphic position and petrographic characteristics of R.A.T. (“Roches Argilo-Talqueuses”) Subgroup, Neoproterozoic Katangan Belt (Congo)

The Neoproterozoic Katangan R.A.T. (“Roches Argilo-Talqueuses”) Subgroup is a sedimentary sequence composed of red massive to irregularly bedded terrigenous-dolomitic rocks occurring at the base of the Katangan succession in Congo. Red R.A.T. is rarely exposed in a continuous section because it was affected by a major layer-parallel décollement during the Lufilian thrusting. However, in a number of thrust sheets, Red R.A.T. is in conformable sedimentary contact with Grey R.A.T which forms the base of the Mines Subgroup. Apart from the colour difference reflecting distinct depositional redox conditions, lithological, petrographical and geochemical features of Red and Grey R.A.T. are similar. A continuous sedimentary transition between these two lithological units is shown by the occurrence of variegated to yellowish R.A.T. The D. Strat. “Dolomies Stratifiées” formation of the Mines Subgroup conformably overlies the Grey R.A.T. In addition, a transitional gradation between Grey R.A.T. and D. Strat. occurs in most Cu–Co mines in Katanga and is marked by interbedding of Grey R.A.T.-type and D. Strat.-type layers or by a progressive petrographic and lithologic transition from R.A.T. to D. Strat. Thus, there is an unquestionable sedimentary transition between Grey R.A.T. and D. Strat. and between Grey R.A.T. and Red R.A.T.The R.A.T. Subgroup stratigraphically underlies the Mines Subgroup and therefore R.A.T. cannot be comprised of syn-orogenic sediments deposited upon the Kundelungu (formerly “Upper Kundelungu”) Group as suggested by Wendorff (2000). As a consequence, the Grey R.A.T. Cu–Co mineralisation definitely is part of the Mines Subgroup Lower Orebody, and does not represent a distinct generation of stratiform Cu–Co sulphide mineralisation younger than the Roan orebodies.     

富宁阳文冲-广南菜子垣热液淋滤卡林型金矿区

金矿区构造活动具有多期性：加里东期及海西期在矿区形成的薄弱角度不整合面、近南北向平行的滑脱断层,是含矿热液的运移、沉淀的通道和空间。金矿床应属地下热液淋滤卡林型金矿床。