红枫湖夏季分层期间pCO2分布规律的研究

在夏季分层期间对红枫湖南、北湖湖心的水样进行分层采集,同时测定了分层水样的温度、pH、HCO₃-浓度、溶解氧(DO)、叶绿素a(Chl-a)及铵根离子(NH₄+)、硝酸根离子(NO₃-)、磷酸根离子(PO₄3-)的浓度,水体中CO₂的分压(pCO₂)由化学平衡及亨利定律求得。研究结果表明:光合作用、有机质降解及水体热分层是影响红枫湖夏季pCO₂分布的主要因素。其中,温水层CO₂欠饱和是光合作用吸收CO₂引起的,温跃层中pCO₂的急剧增加是光合产物降解产生CO₂引起的。静水层沉积物附近pCO₂最高并且还有持续增加的趋势,说明沉积物中有机质降解是静水层中CO₂增加的主要原因,夏季湖底水温较高加快了沉积物中有机质的降解。分层现象使pCO₂在水体中的分布差别明显,并且使静水层中CO₂得到积累。此外,夏季红枫湖水体中pCO₂的变化与NH₄+、PO₄3-的变化密不可分,表现为温水层中光合作用消耗NH₄+、PO₄3-,有机质降解过程伴随NH₄+、PO₄3-的释放。     

对北秦岭太阳寺矿集区金矿成矿特征的初步认识

甘肃省天水冯家场—两当太阳寺一带,是近年来资源评价和矿产勘查的重点,是秦岭-大别成矿省北秦岭成矿带中重要的矿化集中区。文章在分析区域构造背景的基础上,对该区成矿特征进行了初步总结,选择典型矿床进行了介绍,初次把该区命名为太阳寺矿集区,这将对该区矿产勘查工作部署,深入研究矿集区成矿规律具有参考意义。     

太湖入湖河道沉积物中生物利用磷和营养水平分析

为了解太湖入湖河道的营养状况,研究了太湖西部河流沉积物生物利用磷的组成与分布。研究结果显示,北部沉积物中营养元素较高,南部较低;沉积物中生物利用磷的含量次序为藻类可利用磷(AAP)>NaHCO3提取磷(OLP)>水溶性磷(WSP)>易解吸磷(RDP),其中AAP是重要的生物利用磷,AAP的比例越高,富营养化程度越高。AAP与营养元素的相关性在不同区域河道有所不同,北部河道与总氮(TN)、总磷(TP)相关性较好,中部和南部河道与沉积物有机质总量(TOM)相关性较好。沉积物的生物利用磷受不同污染源影响较大。对比河道沉积物与湖泊沉积物的特征,发现湖泊沉积物中生物利用磷(BAP)/总磷(TP)、藻类可利用磷(AAP)/总磷(TP)都高于河道沉积物,表明湖泊沉积物中的磷更容易被植物吸收。     

Pelagic records from the Equatorial Ninetyeast Ridge and significant environmental events during the past 3.5 Ma

This paper presents pelagic records of planktic foraminifera, as well as data of stable isotope stratigraphy and carbonate stratigraphy since 3.5 Ma B.P. from site ODP758 in the Ninetyeast Ridge of the Indian Ocean. Based on these data, manifestations and related mechanisms of major tectonic and environmental events such as the rapid uplift of the Himalaya Mountains, “middle Pleistocene climatic transition” and “mid-Brunhes dissolution event” in the region are discussed. According to the analysis and comparison of various indices and changes in terms of foraminifera assemblage, paleotemperature, paleosalinity and themocline from site ODP758, the authors deduce that the paleoclimatic changes might correlate with the mid-Pleistocene transition at 1.4–1.7 Ma B.P. The changes of CaCO₃, mass accumulation rates (MAR) of CaCO₃ and non- CaCO₃ MAR indicate that the loaded terrigenous sediments increased at 1.7 Ma, which is in agreement with the uplift history of the Qinghai-Tibet plateau as shown by the available data. The last two changes coincide with the uplift of the Qinghai-Tibet plateau, hence they are called “Qinghai-Tibet movement” (1.7 Ma), and the “Kunlun-Yellow River movement” (1.2–0.6 Ma). The changes of the CaCO₃ content, coarse fraction (> 150 μm) content and planktonic foraminifera biostratigraphy show that strong dissolution of abyssal CaCO₃ occurred in the study region during 0.5–0.4 Ma. The event was consistent with the “mid-Brunhes dissolution event” in the sedimentary records of the Atlantic Ocean, Pacific Ocean, Indian Ocean and Nansha sea area of the South China Sea. __________ Translated from Geological Bulletin of China, 2007, 26(12): 1627–1632 [译自: 地质通报]     

Trace metals in suspended particulate matter and in sediment trap material from a permanently anoxic fjord — Framvaren, South Norway

Geochemical studies of the trace metal concentrations in suspended particulate matter (SPM) and sediment trap material from a permanently anoxic fjord, Framvaren, South Norway in 1989 and 1993 indicate that extremely high concentrations of zinc (max = 183920 mg/kg), copper (max = 4130 mg/kg), lead (max = 2752 mg/kg), and cadmium (max= 8.1 mg/kg) sometimes (1993) occur in the SPM collected in the anoxic water layer. The highest concentrations of Zn occur just below the redoxcline at 22 m water depth (in 1993), and copper, lead and cadmium have maximum concentrations between 30 and 80 m depth, where the amount of total SPM is at a minimum (about 0.3 mg/L). On a mass per volume (g/L) basis, the maximum concentrations of Cd, Cu and Fe occur at the interface (21m) and those of Zn occur just below the redoxcline (22 m depth). The SPM and sediment trap data suggest that the metals are precipitated as sulfide minerals in the anoxic water. The presence of particulate sulfides was confirmed by SEM studies that show the occurrence of discrete metal (Cu, Fe, Pb, and Zn) sulfide particles in size from 10–20 m as well as framboidal pyrites (1–5 m in size). Higher levels of metal sulfides at intermediate depths rather than in the deep water of Framvaren (> 100 m), may be due to input of trace metals by water exchange over the sill in the upper part of the water column. In the deep water, less metal sulfide precipitation takes place due to depletion of trace metals, and the dilution of particulate metal concentrations by organic matter and by the chemogenic formation of calcite.     

ELECTROCHEMICAL MEASUREMENT OF STEEL CORROSION IN SEABOTTOM SEDIMENT WITH “MD” METHOD

The tbough one year cormsion potential and polarisation resistanoc for 3 kinds of stals in seabottomedment of Liaodong Bay were measured with the “MD” method.The measurements wiIl have some thoretical and pndital talues. The thooretical valoc lies in thatthe reoorded changing process of the practital corrosion case can be basis for indoor discussion andeectrochemical on the corrosion practical value lies in that the obtained datu canbe basis for designing and controlling elatrochemical protation syttems. In fact, it is very difficult tomeasure in situ the cornosion parnders of steeIs in sea sediment.     

About the specification of erosion flux for soft stratified cohesive sediments

The present paper deals with the specification of bed erosion flux that accounts for the effects of sediment-induced stratification in the water column. Owing to difficulties in measuring the bed shear stress _b and the erosive shear strength _s, we suggest a series of methods that combine laboratory and numerical experiments. A simplified turbulent transport model that includes these effects helps to quantify _b and _s. Focusing on soft stratified beds, the present study considers erosion rate formulas of the form =_f exp {[T_b-T_s]} where is a model constant (=1 for Gularte's (1978) formula and =1/2 for Parchure's (1984) formula). First, the bed erosive strength profile _s(Z) is adjusted by forcing the turbulent transport model with measured erosion rates. Second, three procedures are suggested to determine the erosion rate formula coefficients _f and : a global procedure and two different layer-by-layer procedures. Each procedure is applied to an erosion experiment conducted in a rotating annular flume by Villaret and Paulic (1986). The use of the layer-by-layer procedure based on a least squares fitting technique provides a closer fit than the global procedure. The present study points out the complementarity of experimental and numerical approaches and also suggests possible improvements in laboratory test procedures.     

Environmental geochemistry of the River Gomti: A tributary of the Ganges River

Water and sediment samples collected from the Gomti River, a tributary of the Ganges River system, during the postmonsoon season have been analyzed to estimate major elemental chemistry. Water chemistry of the River Gomti shows almost monotonous spatial distribution of various chemical species, especially because of uniform presence of alluvium Dun gravels throughout the basin. The river annually transports 0.34×10⁶ tonnes of total suspended material (TSM) and 3.0×10⁶ tonnes of total dissolved solids (TDS), 69 percent of which is accounted for by bicarbonate ions only. Samples collected downstream of the city of Lucknow show the influence of anthropogenic loadings for a considerable distance in the river water. Na⁺, Cl^–, and SO₄ ^2– concentrations build up downstream. The bed sediment chemistry is dominated by Si (36 percent), reflecting a high percentage of detrital quartz, which makes up about 74 percent of the mineralogy of the bed sediments in the River Gomti. The average Kjeldahl nitrogen concentration (234 g/g) indicates indirectly the amount of organic matter in the sediments. The Hg concentration in sediments has been found to be higher (average 904 ppb) than the background value. The suspended sediments are well sorted, very finely skewed, and extremely leptokurtic, indicating a low energy condition of flow in the Gomti River. The influence of chemical loads in the Gomti has been found to be small or nonexistent on the Ganges River, perhaps because the water discharge of the Gomti (1.57 percent) to the Ganges is quite low.     

The “Zero-order Model” revisited: Paul Schindler's influence on the development of trace metal scavenging models

In 1975 Paul Schindler produced the first oceanic trace metal scavenging model to explicitly include the role of surface chemistry as a control on trace metal water column residence times. The eighteen years that have elapsed since the publication of Schindler's seminal paper have seen the development of a variety of oceanic scavenging models; yet, the fundamental insight of his Zero-order Model remains the benchmark. This paper describes the role of Paul Schindler's work on surface chemistry in providing a framework for the current generation of trace element scavenging models.     

Palaeoclimatic studies in South Shetland Islands,Antarctica, based on numerous stratigraphic variables in lake sediments

The hitherto longest found lake sediment sequence on Byers Peninsula, Livingston Island, South Shetland Islands, was analysed with respect to lithology, chronology, diatoms, Pediastrum, pollen and spores, mosses, mineralogy, and sediment chemistry. During the ca. 5000 year long development the sediments were influenced by frequent tephra fall-outs. This volcanic impact played a major role in the lake's history during two periods, 4700–4600 and 2800–2500 BP, but was of importance during the lake's entire history with considerable influence on many of the palaeoenvironmentally significant indicators. The large and complex data set was analysed and zonated with different types of multivariate analysis. This resulted in a subdivision of the sequence into 8 time periods and 21 variables. Redundancy analysis (RDA) of this data set, both without and with the tephra periods, and with 4–6 of the variables as explanatory environmental variables, reveal that climatic/environmental signals are detectable. The palaeoclimatic picture that emerged out of the tephra noise suggests that the first 100 years were characterized by mild, humid conditions. This was followed by a less mild and humid climate until ca. 4000 BP when a gradual warming seems to have started, coupled with increased humidity. These mild and humid conditions seem to have reached an optimum slightly after 3000 BP. At ca. 2500 BP a distinct climatic deterioration occurred with colder and drier conditions and long seasons with ice cover. This arid, cold phase probably reached its optimum conditions at ca. 1500 BP, when slightly warmer conditions might have prevailed for a while. Except for the modern sample with rather mild climate, the last 1400 years seem to have been fairly arid and cold, and the effects of the frequent volcanic activity during this period is only vaguely seen in the records.