人工边坡潜在滑动面研究——以广州科学城某人工高边坡为例

运用强度参数的改变对边坡破坏面形迹影响不明显这一特点,在数值模拟过程中通过改变岩体强度参数,有效地获取潜在滑动面的位置和形态,较好地解决了滑动面搜索的难题。将该法应用于广州科学城某人工高边坡稳定性的研究,在三维数值模拟过程中,将强度参数大幅度折减,计算后获得各剖面的剪应变增量图,从这些图中可获得潜在滑动面。这与人们通常将此类边坡的中风化面作为滑动面存在较大差别。将该滑动面运用极限平衡法进行计算,计算结果显示各剖面的安全系数基本都大于1.2,边坡稳定但仍需要加固处理,与三维数值模拟结果相一致。由此认为用这种分析法确定出的潜在滑动面合理、计算结果可靠,可作为搜索边坡潜在滑动面并计算安全系数的方法之一。     

雁南煤矿北二采区充水因素及开采影响评价

在全面分析大雁矿业集团公司雁南煤矿北二采区的水文地质条件及煤层开采矿井充水因素的基础上,计算了开采27^1号煤层时导水裂隙带发育高度．得出了北二采区各煤层工作面开采即不会受到上部砂砾含水层的影响,雁南煤矿铁路涵洞以西的胜利河冲击沟也不会受到北二采区的采动塌陷影响的结论。     

盘南响水矿井船形构造特征及其对煤层开采的影响

盘南响水井田播土采区内北西向断层成组出现,倾向相对,地面大致平行或呈透镜状延伸,深部相交消失,空间形态组合类似船体形状。通过对船形构造内的断层组合及成因分析,认为该船形构造属挽近地质历史时期形成的重力滑动构造,其两侧利用和追踪了先期形成的北西向断层,主滑面主要沿煤系地层中部的17、19煤层等软弱层发育。根据船形构造发育特点,分析了各个船形构造对煤系地层及煤层的切割破坏程度,为矿井生产中的构造预测提供了依据。     

贵州省大方县五凤井田水文地质特征初探

五风井田位于贵州省大方县城东侧,面积89.22km^2,含煤地层为二叠系上统龙潭组,主要可采煤层为6中、26、33号煤层,煤炭总资源量26 130万t。井田内主要含水层为三叠系茅草铺组岩溶溶洞含水层（T1m）,夜郎组玉龙山灰岩岩溶裂隙含水层T1y2）,二叠系中统长兴组岩溶裂隙含水层（P3c）、茅口组岩溶溶洞-暗河含水层（P2m）。矿床属于以岩溶充水为主,水文地质条件中等的矿床。井田的充水水源为地表水、地下水和小煤矿、采空区的老窑积水,充水通道为断裂破碎带及采矿冒落裂隙带。     

靖远矿区采煤沉陷区复垦综合评价方法研究

以靖远矿区为例,从土地复垦和恢复生态学的角度出发,建立了靖远矿区采煤沉陷区复垦综合评价系统,选择土壤条件（土层厚度、土壤质地、有机质含量、土壤水分）、地形改造条件（地面坡度、地表破坏程度、改造难易程度）、气候及水文条件（年降雨量、灌溉条件）作为分类及评价因子对复垦潜力进行评价。将采煤沉陷地分为四种潜力区,对每种潜力类型区的复垦开发利用方向进行了优化设计,从理论上和实践上对靖远矿区采煤沉陷地的复垦能力以及复垦过程中用地结构的优化作了探讨,以期对当地沉陷地的复垦提供一定的科学依据。     

形变,应变短临前兆标志体系

建立各手段的前兆异常标志,从而组合各类前兆标志体系是“八五”地震短临预报攻关研究项目的重要目标之一。本文以形变,应变手段的主要研究对象,初步建立了一个形变应变短临前兆标志体系,并总结出了各种异常的判别标志,为利用系统优化理论和专家系统理论进一步研究形变应前兆系统和地震之间的关系,从而为提高中短期地震预报的水平打下了一定的基础。     

Overbreak and underbreak in underground openings Part 2: causes and implications

Summary The newly developed light sectioning method has been used to investigate some of the causes and costs of overbreak and underbreak. Investigations at the Aquamilpa Hydroelectric Project in Mexico have shown decreased overbreak and increased underbreak as a result of increased rock quality and decreased explosive energy. A new measure of explosive energy, the perimeter powder factor (PPF), has been defined and shown to be useful in the context of tunnel-wall rock damage. Tentative results indicate that explosive energy (PPF) may be a more important factor in producing underbreak, whereas rock quality may be a greater factor in producing overbreak. A site-specific equation is given for predicting overbreak or underbreak as a function of rock quality and explosive energy, with an evaluation of the cost of underbreak and overbreak.     

Using numerical modelling to evaluate tsunami hazard near the Kuril Island

A sequence of computer experiments is used to study questions concerning the tsunami problem as a quantitative estimate of tsunami danger, detailed geographical tsunami classification, determination of the parameters of critical tsunami waves, and the conditions of their development. We call a wave critical, if its impact on the coast is most hazardous.Using the Middle Kuril Island as an example, we present the results of a computer experiment which includes determining the wavefields on the shelf and estimating the effects connected with the deep-water Bussol and Diana Straits.Numerical simulation of tsunami waves of different sources permits the assessment of the extent of tsunami danger in different areas of the coastal zone of Simushir Island, depending on the location of the focus zone and their geometry.The major singularities of the wavefield arise in the zones of the deep-water straits. The distribution of the amplification factors is determined by both the global parameters of the wavefields and the local properties of individual harbours. The results obtained for a particular harbour in the northern part of Simushir Island, formed the basis for the quantitative estimate of tsunami danger for this area.     

中国三个大地震的震源参数及讨论

大地震的震源机制及地震矩、应力降等参数,不(又对认识地震的破裂过程,而且对预报强地面运动都是非常重要的。一些文章对板内地震应力降的特点、地震矩与高频源谱的关系及区域特征的讨论,使我们可直接由长周期体波或面波得出的地震矩M₀估计出不同地区中大地震的高频源谱,以供强地面运动预报参考。 由于对发生在中国板内的1976年11月6日盐源地震（M_s=6.5）和1976年11月15日宁河地震（M_s=6.3）的震源参数还没有详尽的报道;另外,对1973年7月14日     

Uniaxial compression and tension tests of anthracite and loading rate dependence of peak strength

The mechanical characteristics of coal under uniaxial compressive stress and uniaxial tensile stress are key factors in investigations of the stability of galleries and coal faces, and are vital considerations for the efficient design of coalmines, disaster prevention, and environmental preservation. These mechanical characteristics have long been a topic of research, but remain insufficiently understood. In this study we performed uniaxial compression tests and uniaxial tension tests on coal, with particular attention to two concerns. The first was to measure the loading rate dependence of the peak strength of coal. Coal shows high sample-to-sample scatter in strength; test methods that are successful in comparatively homogeneous rock types cannot be used for coal. We therefore used an alternative test method that was recently developed by the authors. Anthracite samples were subjected to alternating slow and fast strain rates. Measured variations in stress during this process were used to estimate the loading rate dependence of peak strength. The second objective was to obtain complete stress–strain curves for coal under uniaxial tensile stress. It is difficult to hold samples secure during a tensile test; consequently, such curves have yet to be obtained. This study presents a successful application of the authors' method to the analysis of coal samples, yielding a complete stress–strain curve under tensile stress. The two methods presented here hold promise for application not only to anthracite but also to a wide variety of coals. It is possible to derive the values of the constants used in constitutive equations from the obtained experimental results. Once these equations are determined, they can be incorporated into finite-element software to investigate various time-dependent behaviors of coal and aid in the efficient design of coalmines and the prevention of subsidence and mine disasters.