Probabilistic Distribution of the Maximum Wave Heigh

A new method of treating maximum wave height as a random variable in reliability analysis of breakwater caissons is proposed. The maximum wave height is expressed as the significant wave height multiplied by the so-called wave height ratio. The proposed wave height ratio is a type of transfer function from the significant wave height to the maximum wave height. Under the condition of a breaking wave, the ratio is intrinsically nonlinear. Therefore, the probability density function for the variable cannot be easily defined. In this study, however, it can be derived from the relationship between the maximum and significant waves in a nonbreaking environment. Some examples are shown to validate the derived probability density function for the wave ratio parameter. By introducing the wave height ratio into reliability analysis of caisson breakwater, the maximum wave height can be used as an independent and primary random variable, which means that the risk of caisson failure during its lifetime can be evaluated realistically.     

Prediction method of seismic residual deformation of caisson quay wall in liquefied foundation

The multi-spring shear mechanism plastic model in this paper is defined in strain space to simulate pore pressure generation and development in sands under cyclic loading and undrained conditions,and the rotation of principal stresses can also be simulated by the model with cyclic behavior of anisotropic consolidated sands.Seismic residual deformations of typical caisson quay walls under different engineering situations are analyzed in detail by the plastic model,and then an index of liquefaction extent is applied to describe the regularity of seismic residual deformation of caisson quay wall top under different engineering situations.Some correlated prediction formulas are derived from the results of regression analysis between seismic residual deformation of quay wall top and extent of liquefaction in the relative safety backfill sand site.Finally,the rationality and the reliability of the prediction methods are validated by test results of a 120 g-centrifuge shaking table,and the comparisons show that some reliable seismic residual deformation of caisson quay can be predicted by appropriate prediction formulas and appropriate index of liquefaction extent.     

Centrifuge modelling of SCR vertical motion at touchdown zone

Steel catenary risers (SCR) connect seabed pipelines and flow lines to floating structures used for oil and gas production in deep waters. Waves and currents induce motions of the structure and the risers. The repeated motions of the risers at the touchdown zone in turn induce loads on the seabed soil and might eventually cause fatigue damage to the risers. The analysis of riser fatigue damage is heavily dependent on the soil model. Soil behaviour at touchdown zone such as soil remoulding, stiffness degradation and deformation of the seabed at the touchdown zone further complicate the accurate assessment of riser fatigue damage, which is currently not appropriately quantified in existing design methods. This paper presents centrifuge model tests simulating the repeated vertical movement of a length of riser on clay seabed with increasing undrained shear strength with depth. During the tests, the pipe was subject to cyclic motion over fixed vertical displacement amplitude from an invert embedment of 0.5-3.5 pipe diameters into the soil. The test results show a significant progressive degradation of soil strength and diminution of excess pore water pressure with increasing number of riser penetration/uplift cycle. In view of the different types of environment loadings experienced by floating platforms and various soil conditions, tests were also conducted to investigate the effect of soil strength, riser displacement rate and loading mode on riser-soil interaction during repetitive penetration/uplift motion of the riser.     

中国城市老工业园区更新的空间治理机制研究——多层次视角的分析框架

城市老工业园区更新中的空间治理涉及多元主体博弈与产业用地发展权重构问题,是当下城市研究的重要学术议题。本文以转型理论中多层次视角的形势、体制与利基为立足点,深层次挖掘城市更新中空间治理转型创新的演化过程与内在机制,提出一种不同层次多种因素间相互作用、动态演化下理解中国老工业园区更新空间治理的方法。该解释框架被应用于上海上钢十厂园区更新转型中,通过关注2004年后两次更新转型的过程和机理,研究发现：上钢十厂的更新转型是由宏观外部形势、空间利基创新、空间体制转型三个层次互动而实现的,上钢十厂两个阶段的更新均在产业转型、城市发展需求变化等宏观形势下诞生创新“新奇”,政府、社会团体或企业等空间治理行为主体共同参与推动“新奇”合法壮大并形成利基,在空间资本积累、产业类型转换中,驱使空间体制成功转型,其本质是利基层的空间创新“新奇”在宏观形势或空间体制要素的影响下解构重塑空间体制的过程。城市更新促进了老工业园区产业转型,提高了环境品质、土地利用强度和经济效益。多层次视角能结合城市更新中空间治理的外部环境、内在驱动因素和演变过程等多方面,有助于从动态演化维度理解城市更新空间变迁及转型治理的内在机制。     

双消浪室局部开孔沉箱防波堤反射特性的理论与试验研究

双消浪室局部开孔沉箱防波堤具有低反射、结构受力小、适宜较大水深和工程造价低等优点。为明确双消浪室局部开孔沉箱水动力特性的主要影响因素,采用理论分析和物理模型试验相结合的方法,对规则波和不规则波作用下双消浪室局部开孔沉箱防波堤的反射特性进行研究。基于势流理论,建立规则波和不规则波对局部开孔沉箱防波堤作用的三维解析解,采用二次压力损失边界条件考虑沉箱开孔墙对波浪运动的影响,利用周期性边界条件考虑防波堤结构沿长度方向的周期性变化。开展相应规则波和不规则波物理模型试验,验证理论模型的合理性。通过算例分析,研究不同波浪要素和结构参数对防波堤反射特性的影响。研究表明:双消浪室局部开孔沉箱相对消浪室宽度取值为0.08~0.20,沉箱前墙开孔率大于后墙开孔率时,防波堤在较大波浪频率范围内消波效果显著;当前后墙的开孔率相等时,防波堤反射系数的最小值随着开孔率增大而减小。     

基于泥沙流变特性的吸力式沉箱减阻技术

针对吸力式沉箱在黏性底床中沉贯安装的减阻问题,基于黏性泥沙的流变特性,开展了一系列不同振动荷载作用下的室内沉贯模型试验,分析了振动荷载对吸力式沉箱沉贯过程的影响和沉贯减阻效果。试验结果表明：在压力沉贯阶段或吸力沉贯阶段施加高频振动荷载,均能促使吸力式沉箱侧壁周围的土体发生流化,有效降低沉箱的沉贯阻力;减阻效果与振动频率和沉箱的长径比有关,与振动频率成正比,与沉箱的长径比成反比;存在一个临界频率,当振动频率大于该频率后,沉贯阻力随频率的减小不明显;施加高频振动荷载有助于减小吸力沉贯阶段沉箱内的土塞高度,促进沉箱沉贯到位。研究成果可为黏性泥沙流变减阻技术在吸力式沉箱中的应用提供理论依据和技术参考。     

吸力式沉箱底部土体循环特性及其等效循环蠕变模型研究

吸力式沉箱基础作为张力腿平台(TLP)的锚固基础,其底部土体不仅存在轴向卸荷作用,而且还存在循环荷载作用。现有研究很少涉及在卸荷条件下进行的软黏土循环累积变形研究。因此,通过循环三轴试验研究了轴向卸荷条件下软黏土的应变累积变形及应变软化特性。试验结果表明:在低静偏应力以及动偏应力条件下,土体应变累积及软化程度较低;随着动偏应力增加,循环累积变形逐渐变大且前期发展较快后期趋于稳定,同时应变软化程度逐渐增大;土体循环累积变形随动偏应力提高而增大,其循环累积应变曲线呈衰减-稳定的蠕变特性。在试验基础上,提出与静偏应力和动偏应力有关的软化系数公式。构建了考虑软化系数与静偏应力、动偏应力等条件下软黏土等效循环蠕变模型。将该模型推广至三维,并开发了有限元子程序。建立了循环荷载作用下吸力式沉箱基础循环抗拔承载力有限元分析法,将其用于吸力式沉箱基础循环累积变形分析中,并与沉箱模型循环试验结果进行了对比验证。     

大型圆形沉井结构应力及其周边沉降计算

根据武汉鹦鹉洲长江大桥北锚碇大型圆形沉井结构特点与工程地质条件,结合施工现场沉降监测控制点的实测数据,采用大型有限元计算程序ADINA建立了三维计算模型,对沉井结构及其周围的地下连续防护墙进行了有限元分析,分析了沉井在下沉与封底过程中其结构自身的应力分布与变形情况,并探索了沉井在下沉过程中对周边邻近高层建筑与堤岸构筑物的影响。计算研究结果表明:沉井外围的地下连续防护墙主应力会随沉井的下沉而相应地增加,在沉井封底后其变形主要出现在上部和底部;而沉井在下沉过程中其结构底部的刃脚、十字隔墙、十字隔墙与环形井壁结合处均会出现较大拉应力;沉井的周边土体沉降量会随下沉深度而相应地增大。在沉井封底完成后测点的沉降理论计算值与实际监测值比较吻合,一般计算值较监测值稍小:二者的差值在邻近高层建筑的沉降控制测点为-1.22~-0.88 mm;而在附近的长江大堤处的关键测点为-1.27~0.64 mm。该计算模型对锚碇沉井下沉过程的沉降控制具有参考作用。     

Dynamic Stability Analysis of Caisson Breakwater in Lifetime Considering the Annual Frequency of Severe Storm

In the dynamic stability analysis of a caisson breakwater, most of current studies pay attention to the motion characteristics of caisson breakwaters under a single periodical breaking wave excitation. And in the lifetime stability analysis of caisson breakwater, it is assumed that the caisson breakwater suffers storm wave excitation once annually in the design lifetime. However, the number of annual severe storm occurrence is a random variable. In this paper, a series of random waves are generated by the Wen Sheng-chang wave spectrum, and the histories of successive and long-term random wave forces are built up by using the improved Goda wave force model. It is assumed that the number of annual severe storm occurrence is in the Poisson distribution over the 50-year design lifetime, and the history of random wave excitation is generated for each storm by the wave spectrum. The response histories of the caisson breakwater to the random waves over 50-year design lifetime are calculated and taken as a set of samples. On the basis of the Monte Carlo simulation technique, a large number of samples can be obtained, and the probability assessment of the safety of the breakwater during the complete design lifetime is obtained by statistical analysis of a large number of samples. Finally, the procedure of probability assessment of the breakwater safety is illustrated by an example.     

The contamination of former iron and steel works sites

 Former iron and steel works sites are significant in terms of their size, number, degree of contamination, and their wide distribution in the United Kingdom. They are likely to have become chemically contaminated with a wide range of substances from the manufacture of iron and steel, and the many associated processes. Associated processes include coke-production, metal refining and finishing. Contamination by metals, inorganic and organic compounds, acids/alkalis and asbestos is common on such sites. The aim of this research was to draw together information on the contamination of former iron and steel works through a review of current literature and by the use of examples and case studies from the UK. The style of the paper is loosely based on an Inter-departmental Committee for Research in Contaminated Land (ICRCL) style guidance note, with case studies and examples. Received: 11 October 1999 · Accepted: 8 March 2000