Frictional heat generation and seismic radiation in a foam rubber model of earthquakes

Results from a study of stick-slip particle motion at the interface between two stressed foam rubber blocks indicate that normal vibrations and interface separation are an important part of the stick-slip process in foam rubber. The dimension of the dynamic slip pulse is small compared to the dimension of the model (approximately 10 cm vs. 200 cm) consistent with the abrupt-locking slip pulse model ofBrune (1970, 1976), andHeaton (1990). A comparison of frictional heat generation between stable-sliding and stick-slip foam rubber models indicates a linear relation between the temperature increase on the fault surface (for a given distance of slip) and the driving shear force for the stable-sliding model, while for the stick-slip model there is essentially no variation in frictional heat generation with an increase in shear stress. We performed experiments to investigate the ratio of normal motion to shear motion at different levels of normal stress in the stick-slip foam rubber model. Preliminary result indicate that the normal component of the particle motion increases more rapidly with increasing normal stress than the shear component. The phenomenon of interface separation and normal vibrations may thus explain some of the most frustrating problems in earthquake mechanics, e.g., the heat flow paradox, the long-term weakness of major active faults, and anomalousP-wave radiation.     

清代移民屯田对新疆地名的影响

本文从移民地名、屯田地名、方位地名、方言地名等方面，论述了清代移民屯田对新疆的地名的影响。     

Large tectonic movement of the Japan Arc in late Cenozoic times inferred from paleomagnetism: Review and synthesis

Abstract Paleomagnetic studies facilitate an understanding of the evolution of the Japan Arc in Cenozoic times from the perspective of tectonic movement. The Japan Arc rifted from the Asian continent in the middle Miocene, while East Asia, including the Japan Arc, moved northward at the same time. The rifting phenomenon of the Japan Arc is described by differential rotation of Southwest and Northeast Japan. Southwest Japan was rotated clockwise through about 45° and Northeast Japan was rotated counter-clockwise through about 40°. This differential rotation occurred concurrently at about 15 Ma. Eighty percent of the rotation was completed during a period of 1.8 million years. These factors lead us to propose a'double door'opening mode with a fast spreading rate of 21 cm/yr for the evolution of the Japan Sea, suggesting that the asthenosphere with a low viscosity was injected beneath the Japan Sea area. The large northward motion of East Asia in relation to Europe is expected from the apparent polar wander path constructed from the paleomagnetic data of the Japan Arc. East Asia may have moved northward by more than 1700 km between 20 Ma and 10 Ma accompanied by a slightly clockwise rotation of 10°. The eastern part of the Eurasian plate was subjected to extreme geodynamic conditions in late Cenozoic times.     

K–Ar ages of the basaltic rocks from Far East Russia: Constraints on the tectono-magmatism associated with the Japan Sea opening

K–Ar ages of the Cenozoic basaltic rocks from the Far East region of Russia (comprising Sikhote-Alin and Sakhalin) are determined to obtain constraints on the tectono-magmatic evolution of the Eurasian margin by comparison with the Japanese Islands, Northeast China, and the formation of the back-arc basin. In the early Tertiary stage (54–26 Ma), the northwestward subduction of the Pacific Plate produced the active continental margin volcanism of Sikhote-Alin and Sakhalin, whereas the rift-type volcanism of Northeast China, inland part of the continent began to develop under a northeast–southwest-trending deep fault system. In the early Neogene (24–17 Ma), a large number of subduction-related volcanic rocks were erupted in connection with the Japan Sea opening. After an inactive interval of the volcanism ∼ 20–13 Ma ago, the late Neogene (12–5 Ma) volcanism of Sikhote-Alin and Sakhalin became distinct from those of the preceding stages and indicated within-plate geochemical features similar to those of Northeast China, in contrast to the Japan Arc which produces island arc volcanism. During the Japan Sea opening, the northeastern Eurasian margin detached and became a continental island arc system, and an integral part of continental eastern Asia comprising Sikhote-Alin, Sakhalin and Northeast China, and the Japan Arc with a back-arc basin. The convergence between the Eurasian Plate, the Pacific Plate and the Indian Plate may have contributed to the Cenozoic tectono-magmatism of the northeastern Eurasian continent.     

围海造陆工程泄水口悬浮物扩散规律分析

掌握围海造陆工程泄水口悬浮物扩散规律,对保护海洋水环境质量具有重要意义。选取围海造陆工程泄水口为研究对象,基于泥沙对流扩散方程,推求出泄水口悬浮物扩散平面二维分析解表达式。开展现场观测,确定泄水口源强取值,并对泄水口悬浮物扩散进行理论计算和分析。研究结果显示,围海造陆工程施工后期,泄水口悬浮物流失非常严重。泄水口附近水域出现的最大悬浮物浓度主要由源强的大小来决定,悬浮物扩散范围主要由流速的大小来控制。     

Evolution trend of the water quality in Dongping Lake after South-North Water Transfer Project in China

To investigate the evolution trend of water quality in Dongping Lake after South-North Water Transfer Project operation as well as to ensure the safe usage of the water receiving areas, water samples were collected and determined before and after water delivery in different hydrological seasons. Then, comprehensive pollution index method, comprehensive nutrition state index method and health risk assessment model were utilized to evaluate the quality, nutrition, and health risk of Dongping Lake water. Results showed that the quality of Dongping Lake water still met level Ⅲ (light pollution) no matter before or after water delivery. The nutrition state was improved from light eutropher before water delivery to mesotropher after water delivery. The health risk level was reduced from high-medium before water delivery to medium level after water delivery. In summary, the operation of the eastern route of South-North Water Transfer Project is beneficial for water environment improvement of Dongping Lake.     

An extended finite volume method and fixed-stress approach for modeling fluid injection–induced tensile opening in fractured reservoirs

Fluid injection–induced tensile opening is modeled using an extended finite volume method (XFVM). An embedded fracture strategy is used for the flow problem, that is, the fractures are discretized using finite volume segments without resolving the grid around them. Further, the discontinuities across fractures are modeled using special basis functions. The fracture openings due to enhanced fluid pressure and the associated shear slip due to traction free boundary condition on the fracture segments are both modeled using these special discontinuity basis functions. Mass transfer between fractures and matrix is modeled using the pressure difference. The enhancement of fracture storativity due to tensile opening leads to stronger coupling between flow and mechanics. An iterative scheme relying on the fixed-stress approach for fractures, which conserves the stress dependent terms over each iteration of the flow problem, has been introduced. Tensile opening has been simulated for single fractures embedded in two- and three-dimensional matrices. The convergence criterion for sequentially implicit fixed-stress scheme for fractures embedded in elastic media is established and has been validated numerically. Further, for 2D simulations, the effect of the matrix permeability for fracture propagation due to tensile opening has been studied.     

Non‐linear seismic response of arch dams with contraction joint opening and joint reinforcements

A comprehensive study of non‐linear seismic response of arch dams with contraction joint opening and joint reinforcements has been conducted. A numerical model of contraction joint reinforcements is presented for optimization control of the joint opening. The objective of this control is to reduce the joint opening and expectantly to balance the sustained loads between the horizontal and the vertical components of the dam, thus avoiding an overstress in the cantilever while retaining the release of arch tensile stresses to some extent. Several parameter studies such as critical element size and required number of joints to be simulated for convergence are also performed. As an engineering application, a 292‐m high arch dam (the Xiaowan arch dam) and the Big Tujunga dam are analysed in detail. The results demonstrate that the joint opening and the corresponding load transfer from the arch to cantilever components of the dam during strong earthquakes are substantial. It is also evident that by providing sufficient strength and reinforcement flexibility, the joint opening can be controlled to some extent. However, the stress redistribution due to reinforcement control is not sufficient to avoid the overstress in the cantilever for the Xiaowan arch dam. Thus, alternative measures are discussed. Copyright © 2000 John Wiley & Sons, Ltd.     

Interaction between a circular opening and fractures originating from its boundary in a piecewise homogeneous plane

The complex variables boundary element method (CVBEM) is used to study interaction between a circular opening and fractures originating from its boundary in a piecewise homogeneous plane. A new complex hypersingular equation for piecewise homogeneous media with a circular opening is obtained. The equation is solved using the CVBEM technique with circular and straight boundary elements and polynomial approximations (with square root asymptotics for crack tip elements) for the unknown functions. The algorithm is verified through comparison with known semi‐analytical and numerical solutions that involve interaction between a circular opening and specific systems of cracks or other openings. New numerical results concerning the interaction of the circular opening with the cracks and circular inclusions are presented. The method is applied to an important problem in the petroleum industry: modelling propagation of hydraulic fractures in the vicinity of a borehole. Copyright © 2000 John Wiley & Sons, Ltd.     

面向市场需求的GIS专业本科教学探讨

在分析目前我国GIS专业人才就业前景和就业现状的基础上,指出高校GIS教学存在的突出问题,并从专业培养目标、课程设置、教师队伍建设和开放性实验建设等方面提出GIS专业本科教学改革的方向。