硬质合金钎头胎体表面渗硼强化实验研究

对钎头胎体表面渗硼方法和工艺进行了实验研究,给出了有关工艺参数与方法。它对提高硬质合金钎头胎体表面和耐磨性,延长钎头的使用寿命具有积极的意义。     

Microchemical Characterization of Natural Gold and Copper Alloys from the Ancient Um Shashoba Gold Mine,South Egypt

The SEM-EDX technique was applied to investigate Au, and Cu＋Sn alloyed grains in the mineralization of the Um Shashoba mine for achieving further understanding of occurrences, internal structures and microchemistry of Au and Cu alloys and associated minerals, and mineralization type. This study is aiming at the genetic history of ore-bearing fluid events, geochemical evaluation and exploration significance. The results showed that the mineralization could be considered as a single major episode generated by metamorphic mesothermal solution rich in sulfides and unsaturated respect to Au. It was differentiated into many stages; started with formation of auriferous pyrite that was pseudomorphed by secondary hematite, limonite and goethite. Three phases of Au alloy were precipitated, and Cu＋Sn and Ag-rich alloys were produced respectively and followed by deposition of two generations of barren pyrite. Calcite and ankerite were crystalized, surrounded and partially replaced some of early formed minerals. Finally, barren muscovite recrystallized around and inside both later formed carbonate minerals that were free of any sign of Au in their structures. The processes of deformation, recrystallization, annealing, dissolution, remobilization and re-precipitation played the most important roles in the genetic history of the mineralization.     

φ71 mm绳索取心铝合金钻杆的研制

介绍了国内外铝合金钻杆的研制现状,分析了绳索取心铝合金钻杆在地质钻探中的优势。对φ71 mm×5.5 mm绳索取心铝合金钻杆体与钢接头连接结构进行了详细设计。通过对试验钻杆进行静拉力、扭矩试验,得出了铝合金钻杆体与钢接头主要技术参数。     

A new, automatic hydrothermal fluid sampler using a shape-memory alloy

A new hydrothermal fluid sampler has been developed to provide more maneuverability in underwater operation. The sampler characteristically employs a shape-memory alloy, which senses high temperature and actuates the suction mechanism. A shape-memory alloy is also used to switch the intake valve of the sampler, the intention being to avoid missampling when the inlet is in low temperature water. Prototype samplers were designed to collect the fluids hotter than 80°C. Test sampling was performed at hydrothermal vents (1372–1374 m deep) in the submarine volcano, Suiyo Seamount, Izu-Bonin Arc, northwestern Pacific. Observed fluid temperature was between 138 and 298°C, while the ambient seawater temperature was 3.1°C. Each prototype collected about 100 ml fluid as designed. The magnesium concentration in the samples indicated a seawater content of 47.5–90.8%, which indicates the entrainment of ambient seawater. Microscopic observatinn revealed the occurrence of microorganisms in the sample fluids at a population density of 10⁵ to 10⁶ cells ml⁻¹, which is 2–3 orders of magnitude higher than those in seawater at that depth. The use of the newly developed fluid sampler will greatly facilitate the collection of vent-associated microorganisms, which are of potential biological and biotechnological interest.     

多维地震作用下大跨空间结构的减震控制分析

考虑到多维地震输入对网架结构的不利影响,基于形状记忆合金超弹性,研制出一种兼具自复位、高耗能及放大功能于一体的形状记忆合金复合黏滞阻尼器(Hybrid Shape Memory Alloy Viscous Dampers,简称HSMAVD),并通过试验研究该阻尼器在循环荷载作用下的力学性能;然后以平面四角锥网架模型为基础,将该阻尼器替换部分网架结构杆件,并分析该阻尼器减震控制效果。结果表明形状记忆合金与黏滞阻尼器复合后具有良好的协同工作能力,可有效发挥形状记忆合金的超弹性和黏滞阻尼器的速度相关特性,使其具有稳定的滞回性能和良好的耗能能力;采用阻尼杆件替换原杆件的方法既能对结构进行有效的减震控制,又不改变原有的结构形式,是一种优越的减震控制方法,并为HSMAVD被动控制系统在结构抗震中的实际应用提供新思路。     

Computational study of self‐centering buckling‐restrained braced frame seismic performance

Recent research developed and experimentally validated a self‐centering buckling‐restrained brace (SC‐BRB) that employs a restoring mechanism created using concentric tubes held flush with pretensioned shape memory alloy rods, in conjunction with a buckling‐restrained brace (BRB) that dissipates seismic energy. The present computational study investigated how the SC‐BRB can be implemented in real buildings to improve seismic performance. First, a computational brace model was developed and calibrated against experimental data, including the definition of a new cyclic material model for superelastic NiTi shape memory alloy. A parametric study were then conducted to explore the design space for SC‐BRBs. Finally, a set of prototype buildings was designed and computationally subjected to a suite of ground motions. The effect of the lateral resistance of gravity framing on self‐centering was also examined. From the component study, the SC‐BRB was found to dissipate sufficient energy even with large self‐centering ratios (as large as 4) based on criteria found in the literature for limiting peak drifts. From the prototype building study, a SC‐BRB self‐centering ratio of 0.5 was capable of reliably limiting residual drifts to negligible values, which is consistent with a dynamic form of self‐centering discussed in the literature. Because large self‐centering ratios can create significant overstrength, the most efficient SC‐BRB frame designs had a self‐centering ratio in the range of 0.5–1.5. Ambient building resistance (e.g., gravity framing) was found to reduce peak drifts, but had a negligible effect on residual drifts. Copyright © 2014 John Wiley & Sons, Ltd.     

Experimental study of a highway bridge with shape memory alloy restrainers focusing on the mitigation of unseating and pounding

This paper presents an experimental study to investigate the performance of shape memory alloy(SMA) restrainers for mitigating the pounding and unseating of highway bridges when subjected to seismic excitations.Mechanical property tests of the SMA wire used in the restrainers are conducted first to understand the pseudo-elastic characteristics of the material.Then,a series of shaking table tests are carried out on a highway bridge model.The structural responses of the highway bridge model equipped with SMA restrainers,installed in the form of deck-deck and deck-pile connections,are analyzed and compared with the uncontrolled structures.The test results of this study indicate that the SMA restrainers are not only effective in preventing unseating but also in suppressing the seismic-induced pounding of the highway bridge model used in this study.     

铁磁形状记忆合金研究进展与展望（Ⅱ）：本构模型

阐述了铁磁形状记忆合金（Ferromagnetic Shape Memory Alloy,简写为FSMA）本构模型研究的重要性。以时间为顺序,重点介绍了FSMA本构模型研究的发展历程和研究现状。仔细分析了各种FSMA本构模型在理论基础、适用范围、精度以及复杂程度等方面的特点,讨论了各种理论应用于FSMA本构模型的局限性,指出了它们在面向应用时存在的问题。研究表明,由于FSMA兼具磁致形状记忆效应、热弹性形状记忆效应等多种独特性能,使对其本构模型的研究存在一定困难,进一步的研究还有待开展。最后指出,对既能揭示FSMA微观机理又能预测其宏观热磁力学行为的本构模型、描述FSMA所有特性的统一模型、面向应用的FSMA简化本构模型等问题,尚有待深入研究。     

绳索取心复合钻柱的动力学行为研究

绳索取心复合钻柱在岩心钻探“满眼钻进”过程中,钻杆易出现不同程度的划痕、压痕及磨痕等情况。本文利用非线性有限元方法,采用三维管单元对绳索取心复合钻柱拉压两处截面的涡动轨迹、涡动速度、横向振动、纵向振动规律进行了分析。结果表明：转速的增加和钻压的增大会显著增加钻柱与井壁的碰撞次数;在相同钻压条件下,随着钻柱回转速度的增大,钻柱与井壁的碰撞机率增加、接触轨迹增长,致使钻柱与孔壁的滑动摩擦机会增多;钻柱的涡动速度均值将随钻压和转速的增加而增大,转速大于钻压的影响;转速的增加则会加大钻柱的横向振荡频率,钻压的增大会增加钻柱横截面的纵向振荡幅值。     

Metallic Iron for Water Treatment: A Critical Review

Water treatment with metallic iron (Fe⁰) is still based on the premise that Fe⁰ is a reducing agent. An alternative concept stipulates that contaminants are removed by adsorption, co‐precipitation, and size‐exclusion in a reactive filtration process. This article underlines the universal validity of the alternative concept. It is shown that admixing non‐expansive material to Fe⁰ as a pre‐requisite for sustainable Fe⁰‐based filtration systems. Fe⁰‐based filters are demonstrated an affordable, appropriate, and efficient decentralized water treatment technology.