采用基础摩擦隔震房屋高宽比限值的研究

大量的试验结果和地震经验表明，采用基础隔震方法能有效地提高建筑物的抗震能力，但建筑物的高度在什么范围，即建筑物的高宽比在什么范围内才适合采用这种方法，仍然是一个有待解决的课题。本文对采用基础滑移隔震多层砌体房屋在实际地震作用下的抗倾覆高宽比限值进行了研究，利用Ｗｉｌｓｏｎ－θ数值积分方法计算，得到了多层砌体房屋的高宽比限值的统计值。其数值结果可供编制建筑隔震设计规程参考。     

某滑坡区滑带土工程地质特性研究

本文论述了某滑坡滑带土的工程地质特性及其滑坡稳定性的影响，为滑坡的合理整治提供了依据。     

块状岩体边坡地震滑动位移分析

岩体边坡在强震作用下往往会产生滑动残余位移。这种位移是边坡稳定性评价的重要参量。本文利用块体动力学原理推导出层状和块状岩体边坡地震滑动位移微分方程式, 并编制了相应的计算程序, 给出了实例的计算结果。     

大跨度切眼锚网锚索支护研究

全煤大跨度切眼传统的支护方式是钢棚支护,为解决无轨胶轮车直接进入工作面,提高工作面设备安装效率,课题组进行锚网锚索支护试验与研究。该项目的试验成功,为矿井高产高效创造了条件。     

复杂区域四边形网格生成的一种改进方法

提出了一种改进的四边形网格生成算法。该法在行波法生成平面三角形网格的基础上，将一个三角形单元分解为三个四边形单元。经过优化处理，获得优良的计算域四边形网格。针对岩土工程结构问题，还提出了网格剖分中尖灭不连续面和锚杆及锚索的处理方案。地下洞室和边坡算例表明了这种方法的可行性和可靠性。     

Analysis of earth dams affected by the 2001 Bhuj Earthquake

An earthquake of magnitude of 7.6 (M_w 7.6) occurred in Bhuj, India on January 26, 2001. This event inflicted damages of varying extents to a large number of small to moderate size multi-zone earth dams in the vicinity of the epicenter. Some of the distress was due to the liquefaction of saturated alluvium in foundation. Liquefaction was relatively localized for the majority of these dams because the earthquake struck in the middle of a prolonged dry season when the reservoirs behind these dams were nearly empty and shallow alluvium soils underneath the downstream portions of the dams were partly dry. Otherwise, liquefaction of foundation soils would have been more extensive and damage to these dams more significant. Six such dams have been examined in this paper. Four of these facilities, Chang, Shivlakha, Suvi, and Tapar were within the 50 km of epicenter region. These dams underwent free-field ground motion with peak ground accelerations between 0.28g to 0.52g. Of these Chang Dam underwent severe slumping, whereas Shivlakha, Suvi, and Tapar Dams were affected severely especially over the upstream sections. Fatehgadh Dam and Kaswati Dam were affected relatively less severely. Foundation conditions underneath these dams were first examined for assessing liquefaction potential. A limited amount of subsurface information available from investigations undertaken prior to the earthquake indicates that, although the foundation soils within the top 2.0 to 2.5 m underneath these dams were susceptible to liquefaction, Bhuj Earthquake did not trigger liquefaction because of lack of saturation of these layers underneath the downstream portions of these dams. These dams were then analyzed using a simple sliding block procedure using appropriate estimates of undrained soil strength parameters. The results of this analysis for these structures were found to be in general agreement with the observed deformation patterns.     

Snow loads on wire mesh and cable net rockfall slope protection systems

Snow load on mesh systems is complicated by many factors. This paper presents field instrumentation data on snow load variation with temperature, snowfall and snow depth on a mesh system. It was found that snow load pattern on mesh systems changed with temperature even without variation in snow depth. It reached its maximum value when the temperature rose just above freezing to melt the interface. The field data was used to formulate appropriate snow load models for the various conditions of temperature in the field. The snow load models were used to study the performance of a number of mesh systems in North America and estimate the interface friction that was prevalent for the different surface conditions.     

体绘制技术在地学3D GIS 可视化中的应用研究

体绘制技术是目前科学计算可视化研究的一个重要组成部分，对地质体内部属性分布的可视化有重要意义。该文针对地学研究中几何建模和属性建模同样重要的特点，基于一种矢栅一体化的混合数据模型，对地质体表面采用三角面片描述几何形状，对地质体内部采用基于八叉树的自适应网格剖分技术描述内部属性特征。对网格剖分后的体数据，采用体元投射的体绘制技术进行地质体内部属性可视化，显示出很好的效果，具有实际应用意义。     

An adaptive finite element model for wellbore breakout simulation

A finite element formulation is proposed and implemented for analysing the stability of excavated wells using the DiMaggio-Sandler constitutive elastoplastic model with a typical carbonate reservoir configuration. The quality of the finite element approximation is ensured by applying smooth curved elements adapted to the wellbore geometry, and h − p adaptive finite element meshes in the plastic zone. General purpose procedures are defined to transfer the elastoplastic deformation history to newly created integration points. A breakout damage criterion is proposed based on the second invariant of the deviatoric plastic deformation tensor. This damage criterion is used to apply a mesh movement algorithm to represent material collapse. The automatic successive application of the breakout damage criterion results in elliptical realistically looking geometries obtained in experiments reported in the literature.     

顾及形态特征和语义信息的双线道路识别方法

双线道路识别与提取是城市路网综合的关键。提出了一种城市双线道路提取的方法。在构建好的道路网眼的基础上,综合考虑双线道路网眼形态特征以及构成网眼路段之间的语义相似度,设计了识别双线道路网眼的综合指标。通过判断网眼综合指标确定最终的双线道路网眼,最后根据识别出的双线道路网眼提取出双线道路。实验表明,该方法能有效提取出城市道路数据中的双线道路。