A 15-year-Long catalog of seismicity in the Eastern Tennessee Seismic Zone (ETSZ) using matched filter detection

We present a detailed catalog of 13 671 earthquakes in the Eastern Tennessee Seismic Zone (ETSZ) that spans January 1, 2005 to July 31, 2020. We apply a matched filter detection technique on over 15 years of continuous data, resulting in arguably the most complete catalog of seismicity in the ETSZ yet. The magnitudes of newly detected events are determined by computing the amplitude ratio between the detections and templates using a principal component fit. We also compute the b-value for the new catalog and comparatively relocate a subset of newly detected events using XCORLOC and hypoDD, which shows a more defined structure at depth. We find the greatest concentration along and to the east of the New York-Alabama Lineament, as defined by the magnetic anomaly, supporting the argument that this feature likely is related to the generation of seismicity in the ETSZ. We examine seismicity in the vicinity of the Watts Bar Reservoir, which is located about 5 ?km from the epicenter of the M_W 4.4 December 12, 2018 Decatur, Tennessee earthquake, and find possible evidence for reservoir modulated seismicity in this region. We also examine seismicity in the entire ETSZ to search for a correlation between shallow earthquakes and seasonal hydrologic changes. Our results show limited evidence for hydrologically-driven shallow seismicity due to seasonal groundwater levels in the ETSZ, which contradicts previous studies hypothesizing that most intraplate earthquakes are associated with the dynamics of hydrologic cycles.     

低周反复荷载下Q460钢材框架柱抗震性能分析

为了进一步完善Q460钢材在抗震设计规范中相关限值的要求,本文利用有限元软件ABAQUS,以轴压比、翼缘宽厚比、腹板高厚比和壁板宽厚比为变量,建立了共48根“工”字型框架柱和“箱”型框架柱,分析了其抗震性能。结果表明:翼缘宽厚比对框架柱的能量耗散系数影响较小;能量耗散系数随轴压比、腹板高厚比（“工”字型）和壁板宽厚比（“箱”型）增大而明显减小;框架柱的极限承载力随轴压比的减小及壁板宽厚比和翼缘宽厚比的增大而逐渐增大,当腹板高厚比接近规范限值时,承载力下降趋势明显增大。与采用Q235钢材的框架柱相比,Q460钢材框架柱的延性较小,仅为2左右;当采用Q460钢材时,“工”字型框架柱的极限位移角限值建议取为0.03,“箱”型框架柱的极限位移角限值建议取为0.032。规范中对翼缘宽厚比限值的规定偏于保守,其值最大可取至9。无论是“工”字型框架柱还是“箱”型框架柱,其腹板高厚比均不宜过大。Q460钢材框架柱的刚度退化率随轴压比的增大而增强,且翼缘宽厚比越大,腹板高厚比越小,柱的初始刚度越大,刚度退化程度越明显。     

秦岭和华北地区地壳低速层的成因探讨──岩石高温高压波速实验证据

对秦岭和华北地区地壳主要岩类１３８个样品进行高温高压实验,测量其纵波速度的结果表明,其中５４个样品出现了纵波低速现象．对出现该现象的样品的实验产物所做的肉眼和镜下观察、电子探针分析以及综合对比显示,微裂隙不是产生低速现象的决定因素,而主要是含水矿物（角闪石、黑云母等）的脱水相交和由之引发的岩石部分熔融导致岩石出现纵波低速现象．通过实验条件与中、下地壳的温度和压力等条件的类比揭示,秦岭和华北地区中、下地壳存在的低速（高导）层也可能是由含水矿物的脱水相变或岩石部分熔融引起的．     

三参数小波及其在地震资料分析中的应用

提出了一类含有三个可调参数的分析小波（称为三参数小波）,通过选择这三个参数,可使其最适合于所给定的问题．Morlet小波及改进的Morlet小波是其特例．通过对三参数小波中的参数加以约束,可以获得一类新的近似解析小波．论证了通过恰当的选择参数,三参数小波不仅适合于分析包含慢变频率和振幅分量的信号,而且也适合于包含快变分量的信号．以三参数小波为分析小波,提出了一种用于薄互层地震资料分析的方法．该方法能够刻画薄互层的沉积旋回,也能研究薄互层内部的局部结构,并采用模型资料验证了方法的有效性．     

Feasibility of borehole ambient noise interferometry for permanent reservoir monitoring

The analysis of seismic ambient noise acquired during temporary or permanent microseismic monitoring campaigns (e.g., improved/enhanced oil recovery monitoring, surveillance of induced seismicity) is potentially well suited for time‐lapse studies based on seismic interferometry. No additional data acquisition required, ambient noise processing can be automatized to a high degree, and seismic interferometry is very sensitive to small medium changes. Thus there is an opportunity for detection and monitoring of velocity variations in a reservoir at negligible additional cost and effort. Data and results are presented from an ambient noise interferometry study applied to two wells in a producing oil field in Romania. Borehole microseismic monitoring on three component geophones was performed for four weeks, concurrent with a water‐flooding phase for improved oil recovery from a reservoir in ca. 1 km depth. Both low‐frequency (2 Hz–50 Hz) P‐ and S‐waves propagating through the vertical borehole arrays were reconstructed from ambient noise by the virtual source method. The obtained interferograms clearly indicate an origin of the ambient seismic energy from above the arrays, thus suggesting surface activities as sources. It is shown that ambient noise from time periods as short as 30 seconds is sufficient to obtain robust interferograms. Sonic log data confirm that the vertical and horizontal components comprise first arrivals of P‐wave and S‐waves, respectively. The consistency and high quality of the interferograms throughout the entire observation period further indicate that the high‐frequency part (up to 100 Hz) represents the scattered wave field. The temporal variation of apparent velocities based on first‐arrival times partly correlates with the water injection rate and occurrence of microseismic events. It is concluded that borehole ambient noise interferometry in production settings is a potentially useful method for permanent reservoir monitoring due to its high sensitivity and robustness.     

Seismic diagnosis of railway substructures by using secondary acoustic emission

One difficult task for the seismic diagnosis of existing structures is how to nondestructively evaluate the damage degree of invisible substructures, such as embedded foundations. To diagnose substructures efficiently, a method for nondestructive inspection is developed by applying acoustic emission (AE) technique. As a newly proposed method, characteristics of secondary AE induced by train operations were investigated, and experiments using model piles and in-situ AE monitoring of in-service railway bridges conducted under railroad traffic, from which it was demonstrated that the proposed method is practicable enough to detect invisible defects in structures. A new index, known as RTRI (ratio of Repeated Train load at the onset of AE activity to Relative maximum load for Inspection period) is proposed for structural damage qualification based on the results of in-situ AE monitoring.     

Non-stationary random vibrations of a shear beam under high frequency seismic effects

Band-limited, non-stationary random vibrations of a shear beam are studied in order to investigate high frequency seismic effects on building structures. A solution for the evolutionary spectral density of the shear beam response to a time segment of band-limited white noise is given in a closed form. The root mean square (rms) and peak response of the shear beam are studied for two characteristic frequency bands: the conventional 1–4 Hz and higher frequency 4–16 Hz, characteristic for rockburst ground motion. Applying the criterion of equal excitation intensity with constant rms velocity, both responses are analyzed in detail and compared. The “switching off” fundamental mode for high frequency excitations results in characteristic overshoot of the stationary response level by the non-stationary rms response and an amplification of the response in the upper part of the shear beam.     

Numerical simulation research on multi-electrodes resistivity imaging survey array

Multi-electrodes Resistivity Imaging Survey （MRIS） is an array method of electrical survey. In practice how to choose a reasonable array is the key to get reliable survey results. Based on four methods of MRIS such as Wenner, Schlumberger, Pole-pole and Dipole-dipole the authors established the model, by studying the result of the forward numerical simulation modeling and inverse modeling, and analyzed the differences among the different forms of detection devices.     

用波速层析成像方法提高储层横向预测精度

以数值模拟方法为基础,考察了反射地震层析成像技术对油气储层波速横向检测的效果,然后用渤海油田的地震资料进行了实用试验．对数值模拟结果和实际数据的试验结果进行了分析与评价,认为油气勘探中的反射地震资料具有地震射线近似垂直分布的特点,适合用反射地震层析成像技术进行目标层横向非均匀性检测．