饱和黄土孔压增长模式与液化机理试验研究

通过室内饱和原状黄土液化试验研究，探讨了孔压增长规律，并从微观结构角度研究了黄土液化机理。研究结果表明：未湿陷饱和黄土结构是一种介稳结构，在地震作用下，介稳结构遭到破坏，塌发和剪缩共同作用造成黄土较大的收缩体积应变并引起孔隙水压力迅速上升。提出的修正A型曲线方程可以用来拟合孔压曲线，拟合参数β隐含了动应力的大小对孔压增长的贡献，而体应变v则反映了湿陷分量对孔压的影响，两者不同组合决定曲线形态丰满程度。液体机理较为合理地解释了塔吉克和海原黄土在近乎平坦的缓坡上形成的泥流。     

GIS支持下地震与活动断裂关系研究--以上海及邻近海域为例

以MAPGIS软件为基础平台 ,利用GIS缓冲区分析和空间叠加分析技术 ,研究上海及邻近海域地震与活动断裂的关系。研究区地震活动断裂的发育程度以继承性NE -NNE向为主 ,但其活动强度不及NW -NNW向及近EW向断裂 ;沿NW -NNW向及近EW向断裂两侧 ,中强地震发生频率明显高于NE -NNE向断裂 ;不同时代活动断裂与中强地震之间存在一定的联系 ,表现为随着断裂活动时代变新 ,断裂周围中强地震发生的频率升高。     

高压喷射注浆技术在白龟山水库顺河坝防渗墙围井试验中的应用

本次围井高喷试验,选用三重管摆喷法处理方案,施工采用两序施工方法.砼墙体连续均匀,孔与孔之间连接较好,其防渗、强度、厚度均能满足设计要求.     

基于GIS的地震安全性评价数据管理的研究

目前的地震安全性评价数据管理方法过于陈旧,不利于数据的查询和再利用。通过对这一问题的深入分析,针对安评数据的多元性特点,结合GIS的优势,提出了利用GIS技术对地震安全性评价数据进行管理的方法,并设计出了数据库管理系统的基本框架。该系统的建立,将为地震安全性评价数据管理、查询和再利用提供便利。     

江淮地区北部晚太古宙TTG质片麻岩

江淮地区北部的灰色片麻岩是深成侵入的英云闪长岩－奥长花岗岩－花岗闪长岩，以高铝型为主，具弱的负Ｅｕ异常或不明显。从英云闪长岩到奥长花岗岩，ＴｉＯ＿２、ＦｅＯ、Ｃａ０、ＭｇＯ减少，而稀土元素分馏程度增加。形成于晚太古宙华北陆台南东大陆边缘挤压的构造环境下，由斜长角闪岩部分熔融而成。     

深源地震机理的新认识──反向裂隙断层作用

高温高压实验究表明，地幔矿物相交与深源地震有着密切的关系。在具有放热效应的橄榄石一尖晶石相变过程中形成的反向裂隙（ａｎｔｉｃｒａｃｈ）是诱发深源地震的主要原因；而发生在下地幔的相变作用（例如钛铁矿－钙钛矿相变）因其具有吸热效应的特征，不形成反向裂隙，从而导致深源地震终止于下地幔顶界。     

数据分析法确定嶂山闸闸基渗透压力

闸基渗透压力是影响水闸闸室稳定的关键性因素。当水闸同时受到上下游水位差、基底承压水头、粘性土地基扬压力滞后等多重因素作用时 ,闸基渗透压力的估算就变得比较困难。通过对嶂山闸闸基历年实测渗透压力数据进行统计分析 ,初步揭示其基底渗透压力的变化规律 ,为该闸闸室稳定性分析提供依据。     

地表的分形测量及其大地构造学意义

以湖北红安地区为例,采用投影覆盖法(projectivecoveringmethod)对地表进行了二维分形测量,结果表明,地表面积具有双分形(bifractal)关系,即具有小尺度的结构分形(texturalfractal)和大尺度的构造分形(structuralfractal),分叉点(breakpoint)的尺度为3610m,分维值都在2～3之间且结构分维值大于其构造分维值。可见,地表形态具有分形性质,分维值可以指示地表形态的复杂程度。构造分维值可作为构造活动强度的一个指标,可为大地构造单元的划分提供定量依据。复杂地表形态主要是由构造活动(内营力作用)和各种复杂表生地质作用(外营力作用)引起的,前者主要控制大尺度的地形起伏,后者则塑造小尺度的地表形态。地表分维值可以指示地表的发育成熟度,该地区小尺度的结构分维值大于大尺度的构造分维值表明其处于地表形态的发育晚期。此外,地表的分形尺度可以来用确定构造活动尺度,从而指导构造地质与找矿勘探研究。     

Deep seismic reflection profiling in the Archaean northeastern Yilgarn Craton, Western Australia: implications for crustal architecture and mineral potential

Deep seismic reflection data across the Archaean Eastern Goldfields Province, northeastern Yilgarn Craton, Western Australia, have provided information on its crustal architecture and on several of its highly mineralised belts. The seismic reflection data allow interpretation of several prominent crustal scale features, including an eastward thickening of the crust, subdivision of the crust into three broad layers, the presence of a prominent east dip to the majority of the reflections and the interpretation of three east-dipping crustal-penetrating shear zones. These east-dipping shear zones are major structures that subdivide the region into four terranes. Major orogenic gold deposits in the Eastern Goldfields Province are spatially associated with these major structures. The Laverton Tectonic Zone, for example, is a highly mineralised corridor that contains several world-class gold deposits plus many smaller deposits. Other non crustal-penetrating structures within the area do not appear to be as well endowed metallogenically as the Laverton structure. The seismic reflection data have also imaged a series of low-angle shear zones within and beneath the granite–greenstone terranes. Where the low-angle shear zones intersect the major crustal-penetrating structures, a wedge shaped geometry is formed. This geometry forms a suitable fluid focusing wedge in which upward to subhorizontal moving fluids are focused and then distributed into the nearby complexly deformed greenstones.     

An experimental study of effect of pre‐existing fabric on deformation of foliated mylonite at high temperature and pressure

We performed deformation experiments on a foliated mylonite under high temperature and pressure conditions in this study. To investigate the effect of pre‐existing fabric on the rheology of rocks, our samples were drilled from natural mylonite with the cylinder axis parallel to the foliation (PAR) and perpendicular to the foliation (PER). We performed 25 tests on seven PAR samples and 21 tests on seven PER samples at temperatures ranging from 600 to 890 °C, confining pressures ranging from 800 to 1400 MPa, and steady‐state strain rates of 1 × 10⁻⁴, 1 × 10⁻⁵ and 2.5 × 10⁻⁶ s⁻¹. In the temperatures of 600–700 °C, the deformation is accommodated by semi‐brittle flow, with the average stress exponent being 6–7 assuming power law flow; in the temperature range of 800–890 °C, deformation is mainly by plastic flow, with an average stress exponent of n = 3 and activation energies of Q = 354 ± 52 kJ/mol (PER and PAR samples). The experimental results show that the strengths of PER samples are higher than those of PAR samples. Deformation microstructures have been studied by optical and electron microscopy. The original foliation of PER samples is destroyed by deformation and replaced by a new foliation, but the deformation of PAR samples followed the original foliation. Electron backscatter diffraction (EBSD) measurements show a strong lattice preferred orientation (LPO) of the quartz c axis fabrics of the starting samples and deformed PER and PAR samples. However, the c axis fabric of quartz in experimentally deformed PER and PAR samples varied with temperature and strain rate is different from that seen in the starting mylonite sample. The initial quartz c axis fabric of the starting mylonite sample has been transformed into a new fabric during experimental deformation. Dehydration melting of biotite and hornblende occurred in both PER and PAR samples at temperatures of 800–890 °C. Copyright © 2014 John Wiley & Sons, Ltd.