A Case Study Of An On-Ice Air Flow Over The Arctic Marginal Sea-Ice Zone

A case study of warm air advection over the Arctic marginalsea-ice zone is presented, based on aircraft observations with direct flux measurements carriedout in early spring, 1998. A shallow atmospheric boundary layer (ABL) was observed, which wasgradually cooling with distance downwind of the ice edge. This process was mainly connected with astrong stable stratification and downward turbulent heat fluxes of about 10–20 W m^-2, but wasalso due to radiative cooling. Two mesoscale models, one hydrostatic and the other non-hydrostatic,having different turbulence closures, were applied. Despite these fundamental differences betweenthe models, the results of both agreed well with the observed data. Various closure assumptions had amore crucial influence on the results than the differences between the models.Such an assumption was, for example,the parameterization of the surface roughness for momentum (z₀) and heat (z_T). This stronglyaffected the wind and temperature fields not only close to the surface but also within and abovethe temperature inversion layer. The best results were achieved using a formulation for z₀ that took intoaccount the form drag effect of sea-ice ridges together withz_T = 0.1z₀. The stability within theelevated inversion strongly depended on the minimum eddy diffusivity K_min. A simple ad hocparameterization seems applicable, where K_min is calculated as 0.005 timesthe neutral eddy diffusivity. Although the longwave radiative cooling was largest within the ABL, theapplication of a radiation scheme was less important there than above the ABL. This was related to theinteraction of the turbulent and radiative fluxes. To reproduce the strong inversion, it wasnecessary to use vertical and horizontal resolutions higher than those applied in most regional andlarge-scale atmospheric models.     

Determination of Roughness Lengths for Heat and Momentum Over Boreal Forests

The roughness length for momentum (z_0m), zero-plane displacementheight (d), and roughness length for heat (z_0h) are importantparameters used to estimate land-atmosphere energy exchange. Although many different approaches have been developed to parameterizemomentum and heat transfer, existing parameterizations generally utilizehighly simplified representations of vegetation structure. Further, a mismatch exists between the treatments used for momentum and heat exchange and those used for radiative energy exchanges. In this paper, parameterizations are developed to estimate z_0m, d, and z_0h for forested regimes using information related to tree crown density and structure. The parameterizations provide realistic representationfor the vertical distribution of foliage within canopies, and include explicit treatment for the effects of the canopy roughness sublayer and leaf drag on momentum exchange. The proposed parameterizationsare able to realistically account for site-to-site differences in roughness lengths that arise from canopy structural properties.Comparisons between model predictions and field measurements show good agreement, suggesting that the proposed parameterizations capture the most important factors influencing turbulent exchange of momentumand heat over forests.     

一维热扩散湖模式在太湖的应用研究

利用在太湖获得的2010年8月11-28日的观测资料研究了一维热扩散湖模式在太湖的适用性,通过对比模拟进一步研究了影响太湖湖表温度模拟的主要因子。该湖模式对太湖最初的模拟结果并不理想,模拟的湖表面温度与观测有较大的系统性偏差,温度的日变化幅度与观测相比也偏小。通过分析该模式对太湖的模拟效果不理想的可能原因,针对太湖的生态环境和污染情况,设计了18个测试参数的敏感性试验,从敏感性试验的结果分析得到,适用于太湖的、依赖于湖泊类型的3个参数应做如下修改:消光系数（η₀）应放大3倍,湖泊表层吸收的太阳辐射系数（β）应取0.8,粗糙长度（z₀）采用公式计算得到。用新得到的适用于太湖的3个参数,模拟得到的结果与最初的模拟结果和观测资料对比,发现采用新的参数后,模拟结果比最初的模拟结果有了很大的改进,模拟的湖表温度基本接近观测,模拟的湖水垂直剖面时间序列图也跟观测吻合得较好,随之的感热、潜热通量的模拟也都与观测接近。最后,对输入湖模式的主要大气参量（太阳辐射、2 m气温及风场）±10%的误差引起的模式模拟的湖表面温度误差进行分析,结果表明该湖模式对大气强迫场的误差敏感度不高;相比之下,模拟结果对风场敏感性最小,对辐射和气温的敏感度相当。     

Near Wall Flow over Urban-like Roughness

In this study, comprehensive measurements over a number of urban-type surfaces with the same area density of 25% have been performed in a wind tunnel. The experiments were conducted at a free stream velocity of 10 m s^-1 and the main instrumentation was 120 ° x-wire anemometry, but measurement accuracy was checked using laser Doppler anemometry.The results haveconfirmed the strong three-dimensionalityof the turbulent flow inthe roughness sublayer and the depths of the inertial sublayer (log-law region) and roughness sublayer for each surface have been determined. Spatial averaging has been used to remove the variability of the flow in the roughness sublayer due to individual obstacles and it is shown that the spatially averaged mean velocity in the inertial sublayer and roughness sublayer can,together, be described by a single log-law with a mean zero-plane displacement and roughness length for the surface, provided that the proper surface stress is known. The spatially averaged shear stresses in the inertial sublayer and roughness sublayer are compared with the surface stress deduced from form drag measurements on the roughness elements themselves.The dispersive stress arising from the spatial inhomogeneity in the mean flow profiles was deduced from the data and is shown to be negligible compared with the usual Reynolds stresses in the roughness sublayer. Comparisons have been made between a homogeneous (regular element array) surface and one consisting of random height elements of the same total volume. Although the upper limits of the inertial sublayer for both surfaces were almost identical at equivalent fetch, the roughness sublayer was much thicker for the random surface than for the uniform surface, the friction velocity and the roughness length were significantly larger and the `roughness efficiency' was greater. It is argued that the inertial sublayer may not exist at all in some of the more extreme rough urban areas. These results will provide fundamental information for modelling urban air quality and forecasting urban wind climates.     

Near-Wall Flow Development After A Step Change In Surface Roughness

An experimental study of the initial flow field downstream of a step change in surface roughness is presented. The roughness length of the downstream surface was approximately tenfold that of the upstream roughness and, unlike all previous studies, attention was concentrated on the roughness sublayer region beneath the inertial (log-law) region. The experiments were conducted at a boundary layer Reynolds number of about 6 × 10⁴ (based on layer thickness andfree-stream velocity) and around a longitudinal location where the (downstream) roughness length, z_o2, was about 1% of the boundary-layer thickness atthe roughness change point.The thickness of the roughness sublayer was found for the two roughness. It was observed that the vertical profiles of mean velocity and turbulence characteristics started to show similarity after about 160z₀₂ downstream of the roughness change. The presence of a shear stress overshoot is shown to depend strongly on the precise location (with respect to the roughness elements) at which the measurements are made and the thickness of the equilibrium layer is shown to be very sensitive to the way it is defined. It is demonstrated that the growing equilibrium layer has first to encompass the roughness sublayer before any thickness of inertial sublayer can be developed. It follows that, in somepractical cases, like flows across some urban environments, the latter(log-law) region may never exist at all.     

城市近地层湍流特征分析

利用中国科学院大气物理研究所在北京的325 m铁塔观测资料,本文分析了47、140和280 m三个高度的湍流统计特征.结果表明,城市近地层的湍流速度方差和湍流温度方差都较好地满足局地相似关系,140 m和280 m的湍流特征非常接近,而47 m的湍流特征与之相比表现出明显的差异,说明由于城市冠层动力和热力非均匀性的影响...     

结合遗传算法的LVQ神经网络在声学底质分类中的应用

学习向量量化（Learning Vector Quantization,LVQ）神经网络在声学底质分类中具有广泛应用. 常用的LVQ神经网络存在神经元未被充分利用以及算法对初值敏感的问题,影响底质分类精度. 本文提出采用遗传算法（Genetic Algorithms,GA）优化神经网络的初始值,将GA与LVQ神经网络结合起来,迅速得到最佳的神经网络初始权值向量,实现对海底基岩、砾石、砂、细砂以及泥等底质类型的快速、准确识别. 将其应用于青岛胶州湾海区底质分类识别研究中,通过与标准的LVQ神经网络的分类结果进行比较表明,该方法在分类速度以及精度上都有了较大提高.     

一种新型海底沉积物声学原位测量系统的研制及应用

为了能够精确地测量海底表层沉积物的声学参数, 自主研制了一种新型海底沉积物声学原位测量系统, 与国内外传统的声学原位测量系统相比, 该系统能够实时显示声波波形, 调整测量参数, 其工作方式除了站位式测量之外, 还实现了拖行式连续测量, 极大地提高了工作效率.根据前期海试情况, 对海底仪器结构进行了重新设计, 使之可以同时测量海底沉积物及海底海水的声学参数, 同时建立了双向数字信道, 解决了测量过程中系统信号的干扰问题.该系统的结构分为两部分:甲板控制单元和水下测量单元, 整套系统通过主机控制程序进行控制, 采用GPS定位系统测定仪器的大地坐标.为了检验系统的稳定性及准确性, 分别进行了实验室水槽实验和海上试验.利用水声测量设备对测量系统进行实验室水槽标定分析, 实验结果表明系统测量值相对误差仅为0.04%, 测量结果具有较高的精度.海上试验在青岛胶州湾和东海海域进行, 获得了试验区域海底沉积物声速和声衰减系数的测量数据, 将测量数据与他人的研究结果进行对比分析, 结果表明测量数据与前人研究结果一致, 较为准确.该原位测量系统在站位式测量和拖行式测量中都能够快速准确地测量出沉积物声速和声衰减系数, 可以作为海底底质声学测量的调查设备.     

来自海底高速层径向波的理论地震图研究

本文利用各向异性反射率技术计算理论地震图,提出海底高速薄层会产生沿高速层水平传播的波（简称径向波）,这种波在水层中作为P波,在固液界面激发下行横波,该均匀横波以临界角入射高速薄层,在层内作为超临界角的非均匀横波水平传播,再以临界角转换为上行传播的均匀横波,最终在固液界面上行透射转换为水层中P波.高速薄层传播的径向波不同于界面折射波,也不同于具有频散的面波和通道波.理论地震图的研究表明,径向波具有线性时距,能与海底强反射具有同等振幅水平;径向波有其振幅、时距位置和斜率这些观测记录参数,分别对应高速层的厚度、深度和近似的横波速度;径向波可以克服折射波解释中遇到的振幅强弱和高速层速度等困难.径向波可作为探测海底高速薄层的有力工具,对于研究高速层屏蔽、海底反射类型的多样性和相应的资料处理解释有重要意义.

     

The effects of scene heterogeneity on soil moisture retrieval from passive microwave data

The τ–ω model of microwave emission from soil and vegetation layers is widely used to estimate soil moisture content from passive microwave observations. Its application to prospective satellite-based observations aggregating several thousand square kilometres requires understanding of the effects of scene heterogeneity. The effects of heterogeneity in soil surface roughness, soil moisture, water area and vegetation density on the retrieval of soil moisture from simulated single- and multi-angle observing systems were tested. Uncertainty in water area proved the most serious problem for both systems, causing errors of a few percent in soil moisture retrieval. Single-angle retrieval was largely unaffected by the other factors studied here. Multiple-angle retrievals errors around one percent arose from heterogeneity in either soil roughness or soil moisture. Errors of a few percent were caused by vegetation heterogeneity. A simple extension of the model vegetation representation was shown to reduce this error substantially for scenes containing a range of vegetation types.