基于强度折减概念的滑坡稳定性三维分析方法(Ⅱ):加固安全系数计算

结合乌江洪家渡1#塌滑体加固设计工程,探讨了滑动面已知的条件下滑坡稳定性的三维分析方法。首先,模拟了塌滑体在天然状态下处于极限平衡状态时的滑动方向,并使用其应力成果计算了塌滑体的三维安全系数;其次,建议了基于强度折减概念的三维加固安全系数计算方法:最后,提出了加固设计的进一步优化方案。计算结果表明,塌滑体的滑动方向与局部地形等高线近于垂直。主滑方向变化较大,自后缘的NE15°方向逐步过渡到中部的NS向,最终过渡到前缘的NE30°方向,以致很难作出能表征主滑方向的地质剖面。基于应力计算成果的安全系数计算公式不能充分考虑滑坡体的抗滑潜能,也不能充分反映滑坡体的滑动方向,安全系数偏大。基于强度折减概念的三维加固安全系数计算方法具有有限元等方法的优点,较好地克服了上述局限性,可以合理地评价加固后的滑坡稳定性。     

Aggregate resources: Production and environmental constraints

Aggregates are produced from sand and gravel deposits or from bedrock sources. Production sites are numerous to minimize transport and are more and more in a competing land use position. Urbanization, while creating a market, also sterilizes deposits and pressures producers to relocate further from populated areas. Regulating and permitting quarries is an issue in regions with growing populations. This regulatory environment may cause exploitation schemes to evolve towards greater recycling, importing, and marine production, for example. These changes may be entirely attributable to increased environmental constraints on producing operations and not on conventional mining constraints such as overburden, ore grade, and costs of operation.     

湖北省巴东县黄土坡滑坡深部变形防治方案探讨

文章根据几年来从事黄土坡滑坡区的勘查、可研及现场工程管理的认识，从滑坡分布特征、物质构成、稳定研究、变形特征等方面对滑坡进行研究。针对该滑坡厚度巨大，滑体强度高，近期深部变形较明显的实情，作者以库仑定律为基础，提出采用岩土加固治理滑坡区深部滑移的初步治理方案。     

A sequence stratigraphic model for an intensely bioturbated shallow-marine sandstone: the Bridport Sand Formation, Wessex Basin, UK

The Bridport Sand Formation is an intensely bioturbated sandstone that represents part of a mixed siliciclastic‐carbonate shallow‐marine depositional system. At outcrop and in subsurface cores, conventional facies analysis was combined with ichnofabric analysis to identify facies successions bounded by a hierarchy of key stratigraphic surfaces. The geometry of these surfaces and the lateral relationships between the facies successions that they bound have been constrained locally using 3D seismic data. Facies analysis suggests that the Bridport Sand Formation represents progradation of a low‐energy, siliciclastic shoreface dominated by storm‐event beds reworked by bioturbation. The shoreface sandstones form the upper part of a thick (up to 200 m), steep (2–3°), mud‐dominated slope that extends into the underlying Down Cliff Clay. Clinoform surfaces representing the shoreface‐slope system are grouped into progradational sets. Each set contains clinoform surfaces arranged in a downstepping, offlapping manner that indicates forced‐regressive progradation, which was punctuated by flooding surfaces that are expressed in core and well‐log data. In proximal locations, progradational shoreface sandstones (corresponding to a clinoform set) are truncated by conglomerate lags containing clasts of bored, reworked shoreface sandstones, which are interpreted as marking sequence boundaries. In medial locations, progradational clinoform sets are overlain across an erosion surface by thin (<5 m) bioclastic limestones that record siliciclastic‐sediment starvation during transgression. Near the basin margins, these limestones are locally thick (>10 m) and overlie conglomerate lags at sequence boundaries. Sequence boundaries are thus interpreted as being amalgamated with overlying transgressive surfaces, to form composite erosion surfaces. In distal locations, oolitic ironstones that formed under conditions of extended physical reworking overlie composite sequence boundaries and transgressive surfaces. Over most of the Wessex Basin, clinoform sets (corresponding to high‐frequency sequences) are laterally offset, thus defining a low‐frequency sequence architecture characterized by high net siliciclastic sediment input and low net accommodation. Aggradational stacking of high‐frequency sequences occurs in fault‐bounded depocentres which had higher rates of localized tectonic subsidence.     

高压喷射注浆法产生的超孔隙水压分析

介绍了高载射注浆法的作用机理,探讨了在施工过程中高压喷射注浆法引起的超孔隙压。根据半无限土体中小孔扩张问题的解,分析了在超孔隙水压作用的瞬时,土体中的应力、变形等,并提出了经验公式。结合一具体工程事故的成功处理,验证了所建议超孔隙水压公式的可行性,同时提出了减少超孔隙水压的对策和方法。     

兰州地区既有构筑物下饱和粉土地基加固方法

兰州地区既有构筑物的天然地基通常是粉土层,由于地下水位上升,这种地基土饱和,导致承载力下降,出现地基不安全现象。针对这一特点,提出了既经济、实用且简便的低压注浆加固地基的处理方法。     

基坑边坡变形的理论计算方法

基于Mindlin应变解,推导出土质直坡和斜坡侧向与竖向变形的理论解.通过计算分析,讨论了影响边坡变形的因素,并据此提出了边坡支护和加固的方法.     

某既有建筑物改造工程地基加固质量的综合检测

随着既有建筑物的增层改造工程的发展和技术的日益成熟 ,为了提高原有建筑物地基土强度和变形能力 ,对其基础加固处理也愈加频繁。如何准确有效地评价其地基加固质量及其空间变化的均匀性是关系此类工程安全可靠的重要保证。本文以某一工程为例 ,讨论既有建筑物增层改造工程的地基加固质量的检测和综合评价方法。该建筑物建于 5 0年代 ,原设计为 5层 ,现增层为 6层 ,采用高压注浆方法进行地基加固处理.     

旋喷桩在盾构法隧道端头井洞口土体加固工程中的应用

盾构法隧道在进行盾构机的始发或到达作业时,当既有端头井洞口挡土墙结构凿除后,保证该位置土体在盾构机刀盘贯入或脱离地层前一段时间内的稳定就成了盾构机始发或到达施工的关键。结合工程实例,从高压注浆原理、注浆参数和施工工艺等方面阐述了二重管旋喷桩在盾构法隧道端头井洞口土体加固工程中的应用。再者,针对旋喷桩加固以及与其相关的盾构始发或到达施工技术方面的一些问题也提出了一些建议和看法。     

豆芽棚滑坡治理工程及效果

对处于临滑状态的豆芽棚滑坡进行综合治理，实施排水、加固、支档和减载等工程。经多种监测结果证明，工程治理效果良好。