板桥-合水地区长63储层成岩相孔隙结构特征及优质储层分布

利用铸体薄片、扫描电镜、常规压汞、恒速压汞及相渗等资料,研究了板桥-合水地区长6₃储层成岩相类型及其微观孔隙结构特征,总结了不同成岩相的测井响应特征,确定了纵向及平面分布规律。结果表明优质成岩相的展布受沉积相、成岩作用与孔隙结构共同控制,尤其是喉道分布才是控制砂岩储层渗透性的主要因素。水云母胶结-残余粒间孔相和水云母胶结-长石溶蚀相储层主要分布于半深湖相重力流复合水道浊流沉积中,细-微细喉道发育,孔喉连通性好,渗流能力最好,油水呈相对均匀的渗流,孔隙内的油气极易通过喉道被开采出来;绿泥石胶结相、水云母胶结弱溶蚀相储层位于分支水道边缘,呈孤岛状分布,孔喉半径小但分布均匀,渗流能力中等-差;碳酸盐胶结相、碳酸盐+水云母胶结相储层主要发育在分支水道间,孔隙结构发育程度差,喉道细小且孔喉连通性差,富集于孔隙中的油气难以通过小喉道,采收率低。     

Present-day Block Movement and Fault Activity on the Eastern Margin of the Tibetan Plateau

The geology and tectonics in the eastern margin of Tibetan Plateau are complex. The main tectonic framework is composed of blocks and faults. Using discontinuous global positioning system survey data for 2008–2014, the velocity field for the Eurasia reference framework was obtained. Based on the velocity field, the present-day velocities of the blocks and boundary faults were estimated. The results reveal that the movement rates of the Chuan-Qing, South China, Chuan-Dian and Indo-China blocks are(17.02±0.60) mm/a,(8.77±1.51) mm/a,(13.85±1.31) mm/a and(6.84 ± 0.74) mm/a, respectively, and their movement directions are 99.5°, 120.3°, 142.9° and 153.3°, respectively. All blocks exhibit clockwise rotation. The displacement rates of the Xianshuihe, Longmenshan, Anninghe, Zemuhe, Xiaojiang and Red River faults are(7.30±1.25–8.30±1.26) mm/a,(10.07±0.97–11.79±0.89) mm/a,(0.96±0.74–2.98±1.73) mm/a,(2.03±0.49–3.20±0.73) mm/a,(3.45±0.40–6.02±0.50) mm/a and(6.23±0.56) mm/a, respectively. The Xianshuihe, Anninghe, Zemuhe and Xiaojiang faults show leftlateral strike-slip movement, while the Longmenshan and Red River faults show right-lateral strikeslip. These characteristics of the blocks and faults are related to the particular tectonic location and dynamic mechanism.     

Characteristics and Genetic Mechanisms of Overpressure in the Depressions of Bohai Bay Basin, China

The distribution and genetic mechanisms of abnormal pressures in the Bohai Bay Basin were systematically analyzed. Abnormal pressures are widely developed in the Bohai Bay Basin, primarily in the Paleogene E2s4, E2s3, Es1, and Ed formations. From the onshore area of the Bohai Bay Basin to the center of the Bozhong area, the top depth of the overpressured zone in each depression increases gradually, the overpressured strata in each depression gradually move to younger formations, and the pressure structure successively alters from single-bottom- overpressure to double-bottom-overpressure and finally to double-top-overpressure. The distribution of overpressured area is consistent with the sedimentary migration controlled by the tectonic evolution of the Bohai Bay Basin, which is closely related to the hydrocarbon-generation capability of active source rocks. The overpressured strata are consistent with the source-rock intervals in each depression; the top of the overpressured zone is synchronous with the hydrocarbon generation threshold in each depression; the hydrocarbon generation capability is positively correlated with the overpressure magnitude in each formation. Undercompaction was the main mechanism of overpressure for depressions with fluid pressure coefficients less than 1.2, whereas hydrocarbon generation was the main mechanism for depressions with fluid pressure coefficients greater than 1.5.     

福建政和上山岗金银矿床控矿构造研究

福建政和上山岗金银矿位于政和—大埔深大断裂带东侧的东坑火山盆地中,为受断裂控制的火山-次火山热液型金银矿床。通过对矿区地质构造的研究,认为矿区断裂发育,主要有NE向、NW向、近EW向和近SN向4组,均为控岩-控矿构造,为矿区内重要的找矿标志。其中,NE向和近SN向断裂为主要的控矿和容矿构造,NW向和近EW向断裂为主要的控岩构造,常切割破坏矿体。金银矿体(脉)的产出严格受火山盆地中的断裂控制,与赋矿围岩的具体岩性关系不明显;矿体(脉)的大小与所在断裂的规模密切相关。矿区外围及深部与主干断裂平行的次级断裂可作为矿区进一步找矿的有利构造。     

东昆仑祁漫塔格矿带典型矿田构造背景与岩浆-热力构造特征

以矿田构造–岩相填图为主要方法,研究确定矿田构造和岩浆-热力构造类型及矿床类型,进行成矿富集中心的圈定及找矿预测,是矿田构造背景复杂地区的有效调研方法之一。东昆仑西段祁漫塔格矿带多期构造–岩浆活动强烈,断裂发育,以印支晚期岩浆侵入成矿与找矿进展较大。本次选择景忍–虎头崖、卡尔却卡B区、乌兰乌珠尔三个矿田区,进行1∶10000构造–岩相填图,填制了三个矿田区岩浆–热力构造类型分布图,认为晚三叠世岩浆侵入作用是该区多金属大规模成矿的主要内因,叠加其上的不同方向断裂控矿作用不同,近东西向和北西西向断裂控矿显著,明确了各矿田构造背景和印支期岩浆侵入形成的花岗斑岩+矽卡岩+断裂带热液成矿的模式,厘定了岩浆–热力构造的识别标志,即主要是印支晚期中酸性侵入岩、花岗斑岩、矽卡岩带、大理岩带、接触交代蚀变带、断裂破碎带叠加热液蚀变带等,圈定了成矿和找矿富集中心。     

基于势流理论和OpenFOAM的耦合模型对多向不规则波浪的模拟

基于势流理论的数值水池可以快速计算波浪的传播及其对建筑物的作用,但是势流理论是基于波浪的无黏性假设的,而在工程中,通常需要在固体边界及波浪破碎的区域考虑黏性效应。针对基于求解Navier-Stokes方程的黏性水池计算量较大、速度较慢的缺点,采用耦合的方法模拟多向不规则波浪的传播,即在外域通过基于势流理论的数值水池产生多向不规则波浪,内域采用求解Navier-Stokes方程和流体体积法(VOF方法)对自由表面进行追踪,通过外域所提供的边界波浪,内域计算可以在较小区域进行计算,从而达到减少计算量、提高计算效率的目的。     

Comparative Analysis of International Energy Consumption Characteristics and China's Countermeasures

With the rise of low carbon economy and the deterioration of the international energy situation, most countries in the world pay more attention to energy issues. In this paper, based on a comparison with several countries of large energy consumption, we used long sequence statistics to analyze the energy consumption characteristics from the world and the history, including energy consumption, energy consumption structure and energy efficiency, and then summed up the characteristics of energy consumption in developed countries, analyzed China's energy consumption process and the current stage, and found out the main problems of energy consumption in China. At last, countermeasures for the healthy development of China's energy were proposed, including actively promoting scientific and technological progress, upgrading energy structure, developing low carbon economy, rationalizing energy prices, improving the proportion of clean energy consumption and emphasizing synergistic effect on environment protection.     

Structuring velocity model of microseism based on genetic algorithm and Levenberg-Marquardt algorithm

为在射孔时间未知条件下达到微震速度模型矫正的目的,采用遗传算法交叉互换搜索最优初值和 Levenberg-Marquardt 算法局部锁定最优解的方式来构建微震速度模型。通过 6 层层状模型及井下不同数量检波器进行试算,随着检波器数量增加,构建的速度模型准确度越高,当检波器数量增加到 20 个时,误差约 13. 4 ×10 －3 ,目的层检波器数量越多,构建目的层速度误差越小,第 5 层检波器由 1 增加到 3 个时,精度提高 9. 1 ×10 －3 ,并且反演震源与实际震源距离相差 10 m,说明此方法在射孔时间未知条件下可以良好构建速度模型。     

从藏南陆-陆碰撞带深部结构构造演化探讨斑岩铜矿的成岩成矿问题

本文以INDEPTH项目对印度大陆与欧亚大陆碰撞带深部成像结果为基础,从构造演化角度探讨藏南陆-陆碰撞带冈底斯斑岩铜矿带的成矿作用问题。深部探测给出的碰撞带深部结构与侯增谦等地质学家提出的深部结构有较大的异同,如何协调起来以深化对藏南陆-陆碰撞条件下成矿作用的认识,这是本文讨论的中心。藏南碰撞带成矿实际上是在新特提斯大洋岩石圈俯冲形成的冈底斯岩浆弧成矿作用的基础上,再经过陆-陆碰撞挤压强烈改造后的再成矿。碰撞带的深部结构构造演化的特点是:(1)新特提斯大洋岩石圈板块向北连续俯冲了约120 Ma,形成的冈底斯陆缘火山岩浆弧带,这导致了陆缘带地壳增厚并含有大量的地幔岩浆流体物质(如南美安第斯成矿带那样);(2)在印度大陆与冈底斯陆缘弧接近碰撞时,在对挤中新特提斯大洋洋壳与大洋岩石圈地幔发生向上挤出与向下拆沉,并使部分洋壳残片和大洋岩石圈物质保存在中上地壳内;(3)两大陆岩石圈碰撞对接后,印度岩石圈地幔加深达70~80 km并沿地壳底部向北推进,并将加厚地壳内大量的成矿物质、钙碱性岩浆,洋壳及新生的下地壳,以及部分地幔物质从地壳底部将其围限起来,成为后期再成矿的物质基础;(4)查明了碰撞带深部壳/幔间产生了一层中间速度层(相当于MASH层),在中上地壳部位出现一层巨大的部分熔融层;(5)在碰撞挤压下冈底斯带内产生多组断裂构造,大型逆冲断裂系与背冲断裂,并引发了含矿岩浆的再活动,并在浮力(下地壳内)和挤压力作用下多次活动上升生成斑岩型铜矿床;(6)成矿后地表遭受过强烈的风化剥蚀作用,使矿床出露地表。     

河南义马地区页岩气储层孔隙非均质性

运用高压压汞、液氮吸附及渗透率测试等实验,利用极差、突进系数、变异系数等参数,表征煤系页岩孔渗特征及孔隙层间非均质性,分析孔隙层间非均质性主控因素。结果表明:河南义马地区上、下石盒子组泥页岩微孔与小孔较为发育,山西组大孔较为发育,分别提供了气体吸附附着面积和储存运移空间;上石盒子组孔容与孔径相对偏差最小,孔隙分布均匀,山西组比表面积相对偏差最小,表面积分布均匀;随围压增大,渗透率不断降低,且满足负指数相关关系;渗透率级差、突进系数和变异系数显示下石盒子组渗透率非均质性较弱,山西组渗透率非均质性很弱,更易于压裂开发。非均质性宏观上主要受沉积物质组成和构造改造作用影响,微观上受成岩演化影响。