毫米波雷达与无线电探空对云垂直结构探测的一致性分析

在众多种针对云垂直结构的探测中,毫米波雷达可获取云底、云顶、云厚等完整的云垂直结构信息,并可以连续监测云的垂直剖面变化,是有力的探测手段之一。而无线电探空因其直接的测量优势,能直观、确切地描述大气湿度垂直结构,可将其进一步处理生成云垂直结构信息,并作为一种数据源用于与毫米波雷达云垂直结构探测结果进行比对,以评估毫米波雷达针对云宏观垂直结构的探测性能,为毫米波雷达更好地应用于云探测提供参考。通过获取位于北京南郊观象台的毫米波雷达2014年10月28日至2015年2月17日长达113天连续观测的反射率因子以及探空温、压、湿数据,设计或选取合适的方法对二者进行云边界的计算,并进行云高（包括云底高和云顶高）以及云层数的一致性比对分析。结果认为,除对于高层云的云顶高度毫米波雷达由于探测限制不能探测到10 km以上的云顶,某些时刻与探空产生较大差异外,在云底高度以及中低云的云顶高度上可以与探空观测取得很好的匹配效果,对于云的垂直分层上二者也有较强的一致性。该毫米波雷达具有较为准确并连续刻画10 km以下云垂直结构的能力。     

基于LLS的雷电流波头时间分布特征

利用湖北省2007—2013年雷电定位系统(Lightning Location System,LLS)监测的雷电流相关参数资料,采用数理统计方法,对雷电流波头时间的年、季、月、日变化以及累积概率和概率密度分布进行了统计分析。结果表明,正闪电平均波头时间为4.8μs,负闪和总闪电为3.6μs;一年中,正闪电7月波头时间最短,月变化特征大致呈"V"形;负闪和总闪电5—7月波头时间比其他月份短,月变化特征大致呈"U"形。正闪电波头时间季节、日变化明显,负闪和总闪电季节、日变化不明显。波头时间小于等于10μs时,正闪、负闪和总闪电的波头时间累积概率分别为95.5%、99.7%和99.6%,总闪电95%的波头时间大于1.5μs,50%的大于3.1μs,5%的大于6.0μs。波头时间在2~3μs时,正闪、负闪和总闪电的概率密度最大。气温较低月份,波头时间相对较长,反之,波头时间相对较短,其原因可能与雷电流幅值大小有关,具体原因有待进一步研究。     

强厄尔尼诺事件下2016年1月中国南方超级寒潮的动力学机制:瞬变波对大气长波异常的调制

本文采用Plumb三维波活动通量和局地Eliassen-Palm通量诊断方法,利用欧洲中期天气预报中心的逐日再分析资料ERA-Interim,分析了超强厄尔尼诺背景下2016年1月下旬中国南方超级寒潮的动力学机制：瞬变波对大气长波异常的调制。前期2015年12月的北大西洋海表热通量正异常,有助于后期大西洋阻塞形势的维持。大气长波能量沿大圆路径从大西洋阻高经乌拉尔地区向东亚中低纬度传播并在此辐合,导致了乌拉尔阻高和华北横槽的经向结构,更多强冷空气聚集在异常偏南的纬向槽线附近。寒潮爆发前夕,2支瞬变波列活跃在亚欧大陆。北支瞬变波列调制了北方的大气长波,使横槽转竖;南支瞬变波列协同调控了南方的大气长波,使南支印缅槽减弱;两者共同作用,促使冷平流大举南下,直达华南沿海,南方寒潮发生。     

天气尺度波列对长江中下游6月梅雨的影响

采用1979—2007年6月NCEP/NCAR2.5°×2.5°逐日再分析资料和中国743站逐日降水资料,利用相关分析、合成分析等方法,分析了天气尺度波列的特征及其对长江中下游6月梅雨的影响。结果表明:当长江中下游6月梅雨较少时,东亚及西太平洋区域存在一个天气尺度波列;该波列的延伸距离较短(从黄河河套地区经过长江中下游至南海、菲律宾海一带),维持时间也很短,且仅仅在500 h Pa以下较强。诊断及个例分析表明,当该波列异常显著时,长江中下游梅雨降水明显减少,而其南部区域降水则增多,说明该波列对预报长江中下游降水具有重要的指示意义。     

2007年夏季江淮强降水过程中10~30d低频变化及其与对流层上层波包活动的联系

利用NCEP/NCAR再分析和全国740站逐日降水资料,运用一点滞后相关等方法,对2007年夏季江淮流域强降水期间低频振荡的波动活动特征及其与降水低频变化的联系进行了分析。结果表明,在2007年夏季降水中,降水低频分量起着重要作用。降水的低频振荡主周期为10~30d,降水距平时间序列与10~30d低频分量具有较好的对应关系。低频扰动在对流层上层和低层都呈现波列状分布,且在降水活跃位相时,低频环流在高、低层具有斜压结构。在对流层上层,低频扰动有缓慢的东移倾向,相速度为每天2~3个经度。西风带中存在多次移动性波列向下游的传播,且在120°E以西以每天14经度的群速度向下游频散能量,表明10~30d低频波动具有明显的下游发展特征。在强降水开始5d前,低频波动与能量可起源于高纬的乌拉尔山附近,沿着西北-东南向的路径向下游传播。下游发展的低频波动为江淮流域带来了能量,为强降水的发生提供了条件。这些结果加深了人们对低频波动在江淮流域强降水过程中所起作用的认识,可为寻找江淮流域强降水过程预报线索提供科学依据。     

基于抗差估计的实时单站GPS同震速度获取方法

基于实时单站GPS载波相位历元差分测速模型,引入抗差最小二乘估计,并根据IGGⅢ方案选择合适的等价权因子来削弱小周跳和粗差对结果的影响,并采用一组静态数据和2011年日本"3.11"地震期间MIZU站的高频数据对算法进行测试。结果表明,在含有小周跳和粗差的情况下,抗差最小二乘估计能够明显改善解算速度,可以实时获取测站毫米级的同震速度。     

重力场数学拟合模型解的影响因素探究

为了提高地球重力场模型不适定方程求解的精度,该文采用谱分析方法从级数展开阶数、数据采样率及数据缺失量3个方面探索影响数学拟合效果的根本因素:从常用的三角级数及勒让德级数模型出发,引出重力场拟合模型球谐函数模型,观察在改变级数展开阶数、数据采样率及数据缺失量等情况下所对应设计矩阵谱结构的变化,并从微观上研究影响误差分配的有关因素及最小奇异值对误差的决定性作用,为探求重力场模型解不准的原因及实现更高精度的全球重力场模型的建立提供参考。     

浅水多波束系统SONIC 2024在码头测深中的应用

文中介绍浅水多波束系统SONIC 2024的技术优点,从姿态参数校正、潮汐改正、声速改正、测线滤波及曲面滤波等方面探讨多波束数据处理的关键技术。以码头实测数据验证该系统在水深测量应用中的便捷性和可靠性。     

Tessellations in GIS: Part II–making changes

Abstract

We attempt to describe the role of tessellated models of space within the discipline of Geographic Information Systems (GIS) – a speciality coming largely out of Geography and Land Surveying, where there was a strong need to represent information about the land’s surface within a computer system rather than on the original paper maps. We look at some of the basic operations in GIS, including dynamic and kinetic applications. We examine issues of topology and data structures, and produced a tessellation model that may be widely applied both to traditional “object” and “field” data types. The Part I of this study examined object and field spatial models, the Voronoi extension of objects, and the graphs that express the resulting adjacencies. The required data structures were also briefly described, along with 2D and 3D structures and hierarchical indexing. The importance of graph duality was emphasized. Here, this second paper builds on the structures described in the first, and examines how these may be modified: change may often be associated with either viewpoint or time. Incremental algorithms permit additional point insertion, and applications involving the addition of skeleton points, for map scanning, contour enrichment or watershed delineation and simulation. Dynamic algorithms permit skeleton smoothing, and higher order Voronoi diagram applications, including Sibson interpolation. Kinetic algorithms allow collision detection applications, free-Lagrange flow modeling, and pen movement simulation for map drawing. If desired these methods may be extended to 3D. Based on this framework, it can be argued that tessellation models are fundamental to our understanding and processing of geographical space, and provide a coherent framework for understanding the “space” in which we exist.     

Water-rock-tailings interactions and sources of sulfur and metals in the subtropical mining region of Taxco,Guerrero (southern Mexico): A multi-isotopic approach

Multi-isotope (H, O, S, Sr, Pb) systems coupled with conventional (major and trace element) hydrogeochemical analysis were applied to determine the origin of water, to model water-rock-tailings interactions and for source apportionment of sulfur and associated toxic metals in the mining region of Taxco, Guerrero in southern Mexico. Oxygen and H isotopes indicate that meteoric water in the zone is rainwater undergoing varying degrees of isotopic fractionation by atmospheric evaporation whereas Sr isotopes trace the interaction of pristine water from volcanics of the regional recharge zone and subsequently flowing through sandstone and shale to spring points. Leachates form from two distinctive sources (spring water and surface water) having differential interactions with bedrocks prior to entering the tailings. Compared to pristine water, leachates are enriched in sulfate, metals (e.g. Fe, Mn, Pb and Zn) and metalloids (e.g. As). The sulfur isotopic composition of ore-sulfides, leachates, secondary precipitates, regional surface water and hypogenic sulfates is described in terms of a two-component mixing model with shale of Mexcala and limestone of Morelos formations representing the light and heavy end-members, respectively, whereas Sr isotopic composition is bracketed combining three lithogenic (Mexcala/Morelos, Tilzapotla and Taxco Schist) sources. Finally, leachates have a mixture of lead from ore-sulfides and Taxco Schist Formation (Family I) or from ore-sulfides alone (Family II). The application of multiple environmental isotopic techniques is an outstanding tool for elucidating complex interactions of water with bedrocks and tailings and for determining the source of sulfur and toxic metal from mining and other metal polluted environments.