基于Ecopath模型的孟加拉国孟加拉湾海域营养结构和能量流动分析

依据现有研究提供的信息,在孟加拉国孟加拉湾（BoB）新划定的超过90 000 km²的海域基于Ecopath方法利用2016年7月至2017年6月的数据构建了该生态系统的营养通道模型。对食物网中营养级从1（主要生产者和碎屑）到3.45（鲨鱼）的各功能群之间的营养相互作用进行评估,所研究的共19个功能群被认为代表了其中所有的营养级。大多数消费者的生态营养转换效率（EE）超过0.80;表明这是一个被高度利用的生态系统,并且从低营养级到高营养级有较高的能量转换效率。此外,整个生态系统的净效率（0.0018）和能量转换效率（11.12%）标志着当前这一"正在发展中的生态系统"已趋向成熟。生态系统的冗余度（64.6）和聚合度（35.4）也表明了这一生态系统的稳定性。因此,本研究认为这一海域具有显著的后备力量面对压力情况并有能力快速恢复到初始状态。     

高精度距离等比例线法海洋划界模型研究

分析表明,目前国内外只对距离等比例线法海洋划界模型作了初步的研究,所建立的模型仍然停留在欧氏平面或地图投影平面上,无法满足海洋划界对分界线点位精度的要求。为改变这种局面,提出并建立了一种全新的基于地球椭球体缓冲区构建技术的高精度距离等比例线法——椭球面距离等比例水线法海洋划界模型。     

南极菲尔德斯半岛地区土壤中主要元素的迁移与富集

对 Si、Al、Fe、Ca、Mg、Mn、K、Na和 P等元素在南极菲尔德斯半岛地区三个代表性土壤剖面 (不饱和寒冻雏形土、纤维质寒冻有机土和鸟成土 )中的迁移与富集规律进行了研究 ,结果表明 ,本区土壤中物质移动和元素迁移现象明显 ;几种主要元素在不同类型土壤以及同一土壤不同层次中的移动行为有显著差异 ,土壤自由水状况和地表生物活动在元素迁移与富集过程中发挥重要作用。另外 ,在土壤发育和土壤粘粒形成过程中 ,不同元素在不同土壤颗粒之间的再分配现象存在较大差异。     

论证南海海疆国界线

According to a series of important historical maps,i.e.,the Location Map of the South China Sea Islands,the Nansha Islands,Zhongsha Islands,Xisha Islands,Yongxing Island and Shidao Island,and Taiping Island(archived by the Territorial Administration Division of the Ministry of Interior of Republic of China in 1946),and the Administration District Map of the Republic of China published in 1948,the dashed line surrounding the South China Sea Islands represents China's sea boundary in the South China Sea at that time.It was both connected with,and an extension of,the land boundary of China.At that time the dashed line was used to represent the waters boundaries while the solid line was used to represent the land boundary—a universal method used in maps that was then recognized internationally.The above observation provides historical and scientific evidence of China's sea boundary in the South China Sea that is useful for the international maritime delimitation over the South China Sea area.     

"3S"技术在省际间海域勘界中的应用

结合海域勘界的理论方法,在“3S”技术支持下,以天津、河北勘界为例,探讨了建立省际间海域勘界辅助决策信息系统的基本方法和关键技术。实践证明,利用“3S”技术建立省际间海域勘界辅助决策信息系统是一条可行的途径,“3S”技术是勘界工作的重要辅助决策手段。     

Geodetic Datum of Indonesian Maritime Boundaries: Status and Problems

Indonesia has maritime boundaries with 10 countries namely: Australia, Timor Leste, Papua New Guinea (PNG), Palau, Philippines, Vietnam, Thailand, Malaysia, Singapore, and India. Many treaties have been ratified concerning these boundaries. Unfortunately, many coordinates of boundary points mentioned in the treaties are not clear in relation to their geodetic datum. The uncertainty in geodetic datum of boundary points introduces complications and problems in spatial management of Indonesia's maritime boundaries, since it can displace the boundary lines from their assumed true location. This study investigates the possible original geodetic datums for the maritime boundaries between Indonesia and neighboring countries, in the case they are not explicitly stated in the treaties. The displacements of boundaries in WGS84 datum are generally in the order of a few hundred meters, i.e., about 200 to 400 m, depending on the assumed original geodetic datum being considered. These boundary displacements are spatially advantageous for Indonesia in some cases and also disadvantageous in others. The study will sum up with some conclusions and recommendations.     

小型海洋调查浮标设计的若干问题

文章概述了国外浮标在恶劣海况下发生的恶性事故,从而提出确保浮标安全可靠的重要性和在设计中必须解决的若干问题:合理的选型;正确的计算;可靠的结构和安全的锚锭系统。文章最后指出小型海洋调查浮标有广阔发展的前景。     

国际海洋划界技术发展与探讨

国际海洋划界的地理环境复杂，涉及学科多，既有法律问题也有技术方法问题。适用于海域划界的国际法原则有多种，在这些海域划界原则指手下涉及了多种因素，并形成了多种划界方法，这样必将使划界工作变得异常复杂。GIS、决策支持系统等技术的应用将在国际海洋划界的管理方面提供强有力的支持，并成为重要的决策工具。     

AUV长基线系统海上应用中若干问题分析

对"CR-02"6 000 m自治水下机器人长基线声学定位系统海上试验中的若干问题从理论上进行分析和计算,并提出了解决方案。海上试验证明了方法的有效性和可靠性,为进一步的试验及应用积累工程经验。     

Isobathymetric Line Simplification with Conflict Removal Based on a B-spline Snake Model

This paper introduces a new method for the smoothing of isobathymetric lines for marine chart construction. Specific constraints have to be observed as the chart must be legible and safe for navigation. The method, based on a snake model, respects these constraints of legibility and safety which impose a direction for curve deformation. Conflicts such as self-intersections are also considered. These two points are the main contributions of the paper as current methods cannot deal with such constraints. Several case studies are presented and results obtained on real data are discussed.