空间数据质量相关问题探讨

阐述研究空间数据质量问题的必要性和重要性,进而依据GIS数据流程系统分析了产生数据质量问题的各种因素;并重点介绍了空间数据质量问题中基本的误差和不确定性分析方法以及常用的误差控制与校正方法。     

地图数字化数据处理的相关平差与精度分析

根据地图数字化坐标转换方法、转换所得地面坐标平差方法 ,得到数字化数据处理的几种方案 ,对不同方案的计算结果进行比较 ,讨论了相关性对平差结果的影响 ,并对数字化数据的精度评定进行了分析     

三角钢标对GPS测量影响的试验分析

GPS测量控制网为了与地面国家控制网进行联合的平差，必须与国家坐标系进行联测，GPS接收机有时也必须安置在有三角钢标的旧有控制点上。通过对此分析研究了三角钢标对GPS测量的影响，对设计和实施GPS测量的用户具有一定的参考价值。     

基于GIS的土壤质量评价研究

介绍了基于GIS土壤质量等级评价的实现过程。探讨了土壤等级评价因子的选择和因子权重的确定方法。在分析了几种常用方法在土壤质量评价中的应用特点并指出几种方法的局限性之后，提出了顾及因子稳定性的多元线性回归分析法，并以南方某地为例进行了实例分析。     

GPS弦距与常规光电测距弦距的比较与分析

比较GPS弦距与常规光电测距弦距的差别，对分析GPS测量误差问题，解决GPS与地面数据联合平差中权的确定问题，以及检核GPS网的解算结果具有重要意义。本文利用一多期复测成果，对其中的一些问题作了初步探讨。     

东天山北麓2000多年以来的森林线与环境变化

依据吉木萨尔县泉子街乡桦树窝子和小西沟两个剖面进行高时间分辨率的孢粉分析，结合剖面岩性特征分析、历史文献记录和碳屑鉴定，揭示了天山北麓最近2000多年以来的环境变化。2000aB．P．以前，该地植被为荒漠草原；2000-1300aB．P．(50a B．C．-650A．D．)，植被为草原植被，其中1750—1400aB．P．(200—550A．D．)，植被为有少量森林的草原植被，当时气候状况较今凉湿，适宜云杉生长，使得云杉林带下移，幅度可达250m左右。当时的年均气温较今低1℃而降水量较高，是新疆历史上一个相对冷湿的环境；约1300—450a B．P．(650—1500A．D．)，植被为荒漠草原；4．50aB．P．年以来，植被为荒漠草原—草原。     

河北省粮食生产发展趋势及其地区差异

河北省2002年粮食作物播种面积为6484.4千hm2,其中小麦占37.8%,玉米39.7%;粮食、棉花、油料的种植比例为15.9:1.0:1.6。北部四地市粮食播面占全省的23.3%,南部七地市76.7%。2002年粮食总产2435.8万t,为1949年的5.2倍;粮食单产3756kg/hm2,为1949年的5.8倍;人均粮食362kg,为1949年的2.4倍。北部地区粮食总产占全省的17.2%,南部地区82.8%。据回归分析与双向差分建模分析,2010年粮食总产可达3087.5万t,粮食单产4478kg/hm2,人均粮食460kg。据灰关联分析,影响粮食总产的主要因子有:粮食单产、农副产品收购价格总指数(1978年=100)、农业机械总动力、农村用电量、农田化肥施用量与有效灌溉面积等。根据笔者预测,若2010年农业机械总动力达8989万kw,农村用电量240.8亿kwh,农田化肥施用量356.1万t,有效灌面4549.2千hm2,则其粮食单产可达4664kg/hm2;若2010年仍保持2000年小麦播面所占比例(0.387),玉米播面所占比例达0.439,则其单产可达4387kg/hm2。     

The use of inclined hemisphere projections for analyzing failure mechanisms in discontinuous rocks

This paper demonstrates the advantages of using inclined stereographic projections in kinematic analysis of rock blocks in discontinuous rock masses. Some examples of limiting cases are presented. The application of inclined projections is illustrated by its use in a mine slope in Brazil. It is clear from the discussion of these examples that inclined hemisphere projections provide better results than horizontal projections. It is also demonstrated that horizontal projections can lead to incorrect results in limiting cases.     

Analysis of the Chiufengershan landslide triggered by the 1999 Chi-Chi earthquake in Taiwan

A disastrous earthquake rocked Taiwan on September 21, 1999, with magnitude M_L=7.3 and an epicenter near the small town of Chi-Chi in central Taiwan. The Chi-Chi earthquake triggered landslide on the dip slope at the Chiufengershan. In this study, a review of the topography and geology of this area was followed by field investigations. Laboratory testing was applied to understand the geomaterial composing the slope. Then, based on a series of limit equilibrium analyses, the failure mechanism of this landslide and the risk of the residual slope were studied.

According to the stability analyses, the pre-quake slope is quite stable, with factor of safety of 1.77 (dry) to 1.35 (full groundwater level); explaining why there is no written record of a landslide here for the past 100 years. In contrast, a back analysis shows that the Chi-Chi earthquake-induced dynamic loading is far more than the dip slope can sustain, due in part to the short distance to the epicenter. A Monte Carlo type probability analysis suggests that the residual slope is more dangerous than the pre-quake slope and needs more attention.     

Spatial probabilistic modeling of slope failure using an integrated GIS Monte Carlo simulation approach

Spatial probabilistic modeling of slope failure using a combined Geographic Information System (GIS), infinite-slope stability model and Monte Carlo simulation approach is proposed and applied in the landslide-prone area of Sasebo city, southern Japan. A digital elevation model (DEM) for the study area has been created at a scale of 1/2500. Calculated results of slope angle and slope aspect derived from the DEM are discussed. Through the spatial interpolation of the identified stream network, the thickness distribution of the colluvium above Tertiary strata is determined with precision. Finally, by integrating an infinite-slope stability model and Monte Carlo simulation with GIS, and applying spatial processing, a slope failure probability distribution map is obtained for the case of both low and high water levels.