New insights on the origin of troctolites from the breakaway area of the Godzilla Megamullion (Parece Vela back‐arc basin): The role of melt‐mantle interaction on the composition of the lower crust

The troctolites and olivine‐gabbros from the Dive 6 K‐1147 represent the most primitive gabbroic rocks collected at the Godzilla Megamullion, a giant oceanic core complex formed at an extinct spreading segment of the Parece Vela back‐arc basin (Philippine Sea). Previous investigations have shown that these rocks have textural and major elements mineral compositions consistent with a formation through multistage interaction between mantle‐derived melts and a pre‐existing ultramafic matrix. New investigations on trace element mineral compositions basically agree with this hypothesis. Clinopyroxenes and plagioclase have incompatible element signatures similar to that of typical‐MORB. However, the clinopyroxenes show very high Cr contents (similar to those of mantle clinopyroxene) and rim having sharply higher Zr/REE ratios with respect to the core. These features are in contrast with an evolution constrained by fractional crystallization processes, and suggest that the clinopyroxene compositions are controlled by melt‐rock interaction processes. The plagioclase anorthite versus clinopyroxene Mg#[Mg/(Mg + Fe^Tot)] correlation of the Dive 6 K‐1147 rocks shows a trend much steeper than those depicted by other oceanic gabbroic sections. Using a thermodynamic model, we show that this trend is reproducible by fractionation of melts assimilating 1 g of mantle peridotite per 1 °C of cooling. This model predicts the early crystallization of high Mg# clinopyroxene, consistent with our petrological observation. The melt‐peridotite interaction process produces Na‐rich melts causing the crystallization of plagioclase with low anorthite component, typically characterizing the evolved gabbros from Godzilla Megamullion.     

Silicate‐oxide mineral chemistry of mafic–ultramafic rocks as an indicator of the roots of an island arc: The Chilas Complex,Kohistan (Pakistan)

The Chilas Complex is a major lower crustal component of the Cretaceous Kohistan island arc and one of the largest exposed slices of arc magma chamber in the world. Covering more than 8000 km², it reaches a current tectonic width of around 40 km. It was emplaced at 85 Ma during rifting of the arc soon after the collision of the arc with the Karakoram plate. Over 85% of the Complex comprises homogeneous, olivine‐free gabbronorite and subordinate orthopyroxene–quartz diorite association (MGNA), which contains bodies of up to 30 km² of ultramafic–mafic–anorthositic association (UMAA) rocks. Primary cumulate textures, igneous layering, and sedimentary structures are well preserved in layered parts of the UMAA in spite of pervasive granulite facies metamorphism. Mineral analyses show that the UMAA is characterized by more magnesian and more aluminous pyroxene and more calcic plagioclase than those in the MGNA. High modal abundances of orthopyroxene, magnetite and ilmenite (in MGNA), general Mg–Fe–Al spatial variations, and an MFA plot of whole‐rock analyses suggest a calc‐alkaline origin for the Complex. Projection of the pyroxene compositions on the Wo–En–Fs face is akin to those of pyroxenes from island arcs gabbros. The presence of highly calcic plagioclase and hornblende in UMAA is indicative of hydrous parental arc magma. The complex may be a product of two‐stage partial melting of a rising mantle diaper. The MGNA rocks represent the earlier phase melting, whereas the UMAA magma resulted from the melting of the same source depleted by the extraction of the earlier melt phase. Some of the massive peridotites in the UMAA may either be cumulates or represent metasomatized and remobilized upper mantle. The Chilas Complex shows similarities with many other (supra)subduction‐related mafic–ultramafic complexes worldwide.     

The Godzilla Megamullion,the largest oceanic core complex on the earth: a historical review

The Godzilla Megamullion is the largest known oceanic core complex (OCC) on the Earth, located in the Parece Vela Basin in the Philippine Sea. In this article, the history of Godzilla Megamullion study is reviewed for the first time, dividing it into three major phases: (i) the early studies done before Japan's extended continental shelf survey program; (ii) the studies during Japan's extended continental shelf survey program that discovered the OCC; and (iii) the studies by the post‐discovery cruises. The early studies included an interpretation of US nautical chart of the southwestern Pacific and the site surveys for Deep Sea Drilling Project cruises (DSDP Legs 6, 31 and 59). The early studies recognized the presence of the Parece Vela Rift, the extinct spreading axis of the Parece Vela Basin, and established the currently accepted model that the Philippine Sea evolved with eastward progression of backarc spreading and arc migration. The modern understanding of the Parece Vela Basin comes from Japan's extended continental shelf survey program. The program revealed the ultramafic petrology as well as a two‐stage evolution model of the basin. Following these results, the discovery of the Godzilla Megamullion was made in 2001. The studies by the post‐discovery cruises further revealed important characteristics of the OCC, such as the presence of abundant plagioclase‐bearing peridotite and the systematic temporal changes in both deformation microstructures and composition of plagioclase and amphibole in gabbroic mylonites and ultramylonites. Zircon U–Pb ages of gabboric and leucocratic rocks indicate that the terminal phase of Parece Vela Basin spreading was with a significant decline in spreading rate and asymmetry accompanying formation of the Godzilla Megamullion. The estimated denudation rate of the OCC was approximately 2.5 cm/yr; significantly slower than the previous estimate based on poorly constrained magnetic data.     

Genetic algorithm for fitting a mixed Bingham distribution to 3D orientations: a tool for the statistical and paleostress analyses of fracture orientations

The clustering of fracture orientations is important for tectonic studies and for geotechnical engineering. In this study, a real‐coded genetic algorithm was adopted to fitting a mixed Bingham distribution to orientation data by maximizing the log‐likelihood function of the distribution. The maximization is a difficult problem, because the function has multimodality and singularity. It was found that the algorithm was effective for this problem. Given the orientations of dilational fractures, the present method determines not only the stress axes and stress ratio of each of the fracture groups but also the maximum non‐dimensionalized fluid pressure at the time of their formation. In addition, the software calculates the 95 % error ellipses of the concentration axes. The present method found that the orientations of ore veins of the Akenobe Mine, SW Japan, should be partitioned into three clusters. It is shown that two of the groups had distinctive Zn and Sn contents, and that the ore fluids had overpressures only slightly greater than the minimum principal stress at the time of the deposition of Zn‐ and Sn‐rich veins.     

A new Lower Triassic (Induan) Jerus Limestone locality in northwest Pahang,Peninsular Malaysia: Conodont fauna,depositional and tectonic settings

Limestones exposed north of Raub, Pahang, Malaysia, and sandwiched between the Bentong‐Raub Suture Zone and the westernmost margin of the Sukhothai Arc terrane, yield a late Dienerian (late Induan) conodont fauna. The co‐occurrence of Neospathodus dieneri Sweet (morphotypes 1, 2 and 3) and Neospathodus pakistanensis Sweet represents the Neospathodus dieneri morphotype 3 sub‐zone of the Neospathodus dieneri Zone. The sampled limestones are interpreted as the northwards extension of the Jerus Limestone which crops out near Cheroh and Jerus villages, significantly extending the known outcrop of the Jerus Limestone northwards. The Jerus Limestone is interpreted as hemipelagic and formed in a foredeep or forearc setting on top of the accretionary complex formed by eastwards subduction of the Palaeo‐Tethys during the Lower to Middle Triassic.     

青海日月山断裂德州段断错地貌的高分辨率遥感影像解译

青海日月山断裂带是青藏高原东北缘柴达木—祁连活动地块内部的一条NNW走向的右旋走滑兼逆冲断裂。 本文基于ENVI 5.1遥感图像处理平台对研究区高分一号多光谱(分辨率8 m)和全色(分辨率2 m)影像进行融合, 获取了高保真、 高分辨率的卫星遥感影像。 通过多尺度、 多角度、 多层次的构造解译以及对比, 将日月山西支断裂的海晏段划分为德州段(F_1-3)和海晏段(F_1-4)两个次级段, 同时利用高分辨率Google Earth影像对德州段断错微地貌进行了解译、 分析, 结合对德州段野外地质考察, 进一步验证了影像解译结果。 研究表明: 日月山断裂的德州段由5条次级段落组成(f₁, f₂, f₃, f₄, f₅), 并且该段断裂晚更新世以来活动性明显, 以右旋走滑为主兼有逆倾滑分量; 断裂在晚更新世以来发生过多期断层活动, 其中全新世断层活动可划分为两期, 最新一期水平位错量为6.5~8.7 m, 第二期水平位错量为12.3~14 m; 晚更新世也可划分出两期活动, 第一期水平位错量为16~20 m, 第二期水平位错量为28.5~47 m。     

Isolated Archosaur teeth from the green sandstone capping the Coralline Limestone (Bagh Group) of the Narmada valley: Evidence for the presence of pre‐Late to Late Maastrichtian abelisaurids in India

Recent field prospecting in the Cretaceous sequences of the lower Narmada valley has led to the discovery of three isolated archosaur teeth from the upper part of marine Cretaceous rocks of the Bagh Group. The specimens were recovered by surface prospecting from an oyster‐bearing green sandstone bed occurring at the top of the Coralline Limestone (Coniacian) from a site near Phutibawri village, Dhar District, Madhya Pradesh, India. Of the three teeth recovered from this horizon, two are identified with abelisaurid dinosaurs and the third one with an indeterminate crocodile. The abelisaurid teeth conform to the premaxillary and maxillary tooth morphology of Majungasaurus and Indosuchus. Earlier reports of abelisaurid dinosaurs from India are from the Upper Cretaceous (Maastrichtian) Lameta Group of Jabalpur, Pisdura (Central India) and Balasinor (Western India) and Upper Cretaceous (Late Maastrichtian) Kallamedu Formation (South India). As no associated age diagnostic fossils are found, the specimens described here are considered to represent pre‐Late to Late Maastrichtian age based on the known ages of the underlying and overlying formations. The new finds, therefore, document stratigraphically the oldest occurrence of abelisaurid dinosaurs known from the Indian subcontinent.     

Albian extrusion evidences of the Triassic salt and clues of the beginning of the Eocene atlasic phase from the example of the Chitana-Ed Djebs structure (N.Tunisia): Implication in the North African Tethyan margin recorded events, comparisons

In the northern part of Tunisia, close to Testour/Slouguia, new observations and updated biostratigraphy make it possible to highlight the relation between the Triassic saliferous mass and the surrounding Mesozoic beds (T. M.). Near the (T. M.) boundary, the formations observed consist dominantly of Triassic evaporites reworked in the Early and Late Albian deep-water sedimentary deposits. Throughout the studied area, Jurassic rocks are absent. We propose to interpret the Chitana-Ed Djebs structure originally emplaced as gravitational stretch masses in a passive margin in the same way as the salt bodies of widespread salt province in the Gulf of Mexico. A reconstructed schematic position of the Chitana-Ed Djebs salt body displays a scenario of setting of the salt mass on a submarine palaeo-slope. Moreover, the starting clues of the paroxysmal event of the Late Mesozoic tectonic inversion clearly fossilized through the discordance of the Middle Eocene–Early Lutetian limestone on the Albian series.     

Simultaneous Determination of Fluorine,Chlorine, Bromine and Iodine in Six Geochemical Reference Materials Using Pyrohydrolysis,Ion Chromatography and Inductively Coupled Plasma‐Mass Spectrometry

Concentrations of halogens (fluorine, chlorine, bromine and iodine) were determined in six geochemical reference materials (BHVO‐2, GS‐N, JG‐1, JR‐1, JB‐1b, JB‐2). Halogens were first extracted from powdered samples using a pyrohydrolysis technique, then hydrolysis solutions were analysed by ion chromatography for F and Cl and inductively coupled plasma‐mass spectrometry for Br and I. The detection limits in solutions were 100 μg l^?1 for both F and Cl and 10 ng l^?1 for Br and I. Considering the extraction procedure, performed on a maximum of 500 mg of sample and producing 100 ml of pyrohydrolysis solution, detection limits in rock samples were 20 mg kg^?1 for F and Cl and 2 μg kg^?1 for Br and I. The mean analytical errors on the studied composition ranges were estimated at 10 mg kg^?1 for F and Cl, 100 μg kg^?1 for Br and 25 μg kg^?1 for I. The concentration values, based on repeated (generally > 10) sample analysis, were in good agreement generally with published values and narrowed the mean dispersion around mean values. Large dispersions are discussed in terms of samples heterogeneity and contaminations during sample preparation. Basaltic RMs were found to be more suitable for studies of halogen compositions than differentiated rock material, especially granites – the powders of which were heterogeneous in halogens at the 500 mg level.     

大型石化建设工程（广西石化）项目管理信息系统应用实战剖析

中国石油广西石化1000万t/a炼油项目参与各方人员共同使用p3e/c软件编制完成了该项目基础设计、详细设计、采购、施工、试车等整个项目各装置各级网络计划。阐述了应用p3e/c软件在该项目计划、进度与费用控制实战中的计划目标的建立、控制与应用,旨在为同类项目在计划、进度与费用控制上起到抛砖引玉的作用。广西石化1000万t/a炼油项目的计划管理工作吸取了国际上先进的项目管理经验及方法,全面采用了p3e/c软件作为计划管理工具,并充分结合了目前国内施工管理的实际水平,探索出国内大型新建炼油项目计划管理工作的新路,使广西石化1000万t/a炼油项目的计划管理工作处于国内领先的位置。