近几十年我国极端气温变化特征分区方法探讨

采用聚类统计检验分析和旋转主分量分析相结合确定中心站的方法,利用我国多年极端气温资料,对我国最高和最低气温年际变化型态进行区划。结果表明,这两种方法结合可以互相补充,使分区结果更具客观性。中国极端高温和极端低温年际变化分别可划为12和11个不同类型的区域,分别计算了各区域第一主成分的方差贡献率以及各区域之间的两两相关系数,检验证明分区是合理的。     

双坡面临空岩质边坡滑动破坏模式下的稳定性分析

多数岩质边坡稳定性分析已基本解决了常走向单坡面临空的边坡平面滑动问题。然而,在路堑边坡工程和自然边坡中有很多边坡坡面并不是平面,它包含多个坡面。多坡面边坡包含两个或多个不同走向的坡面。多坡面边坡几何特征不同于单坡面边坡,所以滑动条件也不一样。在赤平投影图上,多坡面的滑动包络线是组成边坡的每个坡面单独投影包络线的组合。为了探讨方便,只讨论了双坡面临空岩质边坡的滑动破坏模式,并将其分为双坡面临空下的平面破坏和楔形体破坏。在赤平投影图上,双坡面滑动区域定义为双坡面边坡滑动包络图中两侧坡面的真倾线之间的面积。如果有一两个节理面真倾向线落在滑动区内,滑动破坏才可能发生。     

GIS技术支持下的招远市金矿区崩塌遥感调查

在总结前人研究成果的基础上,全面系统地分析了诱发招远市金矿区崩塌的自然和人为因数,然后运用遥感技术对金矿区遥感图像进行处理,提取诱发崩塌的条件因子,聘请有经验的专家对各项诱发因子进行诊断分析,以此作为判断条件,在G IS技术的支持下对诱发崩塌的条件因子进行空间分析,预测出招远金矿区发生崩塌的危害程度,为防治崩塌提供科学依据。预测结果表明,招远金矿区崩塌有进一步发展的可能,其中,高危险区有36820 m2,中易发区有50 610 m2,低易发区有67 200 m2,需要采取有效措施加以防治。     

20世纪90年代以来中外区域规划研究的对比分析

区域规划是国家政府进行区域管理的重要手段和方式之一。为了落实科学发展观和对区域发展有效宏观调控,区域规划成为国家“十一五”规划的重要内容。本文对比分析了1990年代以来国外区域规划研究的主要进展、以及我国区域规划研究的特点与不足,以期为推动我国当前新一轮区域规划的理论研究和实践创新提供有益启示。     

发展中山会展旅游的思考

会展旅游是当今世界旅游业发展的一个重要方向，是一个蕴涵巨大价值的旅游项目，是都市旅游不可或缺的一部分。中山会展旅游不仅有着良好的区位条件，而且具有持续发展的良好经济环境。但中山会展旅游的宜传、促销力度不够，专业人才匮乏，市场运作不完善，旅游辅助作用有限，同时，面临周边城市的激烈竞争。对此，应把会展旅游作为培育中山旅游的重要动力来认识，加强对会展旅游的宣传推广，提高认识；培养专业人才，建立会展旅游组织；强化特色，准确定位；广泛协作联合，使广州的会展旅游走上可持续发展轨道。     

Microwave-assisted extraction of organochlorine pesticides from sediments and determination by gas chromatograph with electron capture detection

A simple and rapid procedure to extract organochlorine pesticides （OCPs） from sediments by means of microwave energy is proposed. Sediment samples were irradiated with microwaves in a closed vessel system while immersed in hexane-acetone （1 ： 1, v/v）. The sample extracts were cleaned up using solid phase extraction with Florisil as adsorbent. Pesticides were eluted with hexane-ethyl acetate （80 ： 20, v/v） and determined by gas chromatographic separation with electron capture detection. Three oven programs were assayed with two different solvent mixtures in order to achieve adequate experimental conditions for the complete extraction of organochlorine pesticides from the matrix. Different variables such as the composition of extraction solvent,     

Effect of polypropylene fibre and lime admixture on engineering properties of clayey soil

In order to reduce the brittleness of soil stabilized by lime only, a recent study of a newly proposed mixture of polypropylene fibre and lime for ground improvement is described and reported in the paper. To investigate and understand the influence of the mixture of polypropylene fibre and lime on the engineering properties of a clayey soil, nine groups of treated soil specimens were prepared and tested at three different percentages of fibre content (i.e. 0.05%, 0.15%, 0.25% by weight of the parent soil) and three different percentages of lime (i.e. 2%, 5%, 8% by weight of the parent soil). These treated specimens were subjected to unconfined compression, direct shear, swelling and shrinkage tests. Through scanning electron microscopy (SEM) analysis of the specimens after shearing, the improving mechanisms of polypropylene fibre and lime in the soil were discussed and the observed test results were explained. It was found that fibre content, lime content and curing duration had significant influence on the engineering properties of the fibre–lime treated soil. An increase in lime content resulted in an initial increase followed by a slight decrease in unconfined compressive strength, cohesion and angle of internal friction of the clayey soil. On the other hand, an increase in lime content led to a reduction of swelling and shrinkage potential. However, an increase in fibre content caused an increase in strength and shrinkage potential but brought on the reduction of swelling potential. An increase in curing duration improved the unconfined compressive strength and shear strength parameters of the stabilized soil significantly. Based on the SEM analysis, it was found that the presence of fibre contributed to physical interaction between fibre and soil whereas the use of lime produced chemical reaction between lime and soil and changed soil fabric significantly.     

Performance of Mortar and Chemical Grout Injection into Surrounding Soil When Slurry Pipe-jacking Method is Used

Small-diameter shallow tunnels are often being built by using the slurry pipe-jacking method. This system involves the pushing or thrusting of a drivage machine and concrete pipes into the ground. Chemical grout injection into the surrounding soil around the tunnel is carried out after the drivage and pushing processes are finished. The purpose of the chemical grout injection is to maintain permanent stability of the surrounding soil. However, the behavior of the chemical grouting material in the surrounding soil around the tunnel and the amount of optimum injection is not clearly understood. From these points of view, this paper discusses the performance of the chemical grouting material, when it is injected into the surrounding soil around the tunnel, by means of 2-D Eulerian–Lagrangian seepage analysis. Moreover, the effectiveness of the chemical grout injection was evaluated by using the non-linear finite element method. This investigation show when the range of the grouted zone is designed; it is necessary that the relationship between Young’s modulus of the soil/grouted zone and the confining stress be taken into consideration in order to establish effective, economical and safe chemical grout injection system. Understanding the performance of the seepage/dispersion behavior of the chemical grout and the characteristics of soil/ grouted zone is also important.     

In situ time resolved synchrotron powder diffraction study of thaumasite

Structural changes during dehydration and subsequent decomposition in thaumasite Ca₃Si(SO₄)(CO₃)(OH)₆·12 H₂O were studied by in situ synchrotron powder diffraction between 303 and 1,098 K. Evolution of the crystal structure was observed through 28 structure refinements, by full profile Rietveld analysis performed in the P6₃ space group, between 300 and 417 K, whereupon the thaumasite structure was observed to breakdown. Within this temperature range, the cell parameters of thaumasite increased as a function of temperature in a nearly linear fashion up to about 393 K, at which temperature, a slight slope change was observed. Above 400 K, the thermogravimetric analysis revealed that the dehydration process proceeded very rapidly while the refined occupancy of water molecules dropped below a critical level, leading to instability in the thaumasite structure. At a same time, a remarkable change in the unit cell parameters occurring at about 417 K indicated that the crystal structure of thaumasite collapsed on losing the crystallization water and it turned amorphous. This result indicated that the dehydration/decomposition of thaumasite was induced by the departure of the crystallization water. At about 950 K, anhydrite and cristobalite crystallized from the thaumasite glass.     

A Practical Procedure for the Measurement of Fragmentation by Blasting by Image Analysis

Summary. The operation of a digital image analysis system in a limestone quarry is described. The calibration of the system, required in order to obtain moderately reliable fragmentation values, is done from muckpile sieving data by tuning the image analysis software settings so that the fragmentation curve obtained matches as close as possible the sieving. The sieving data have also been used to extend the fragment size distribution curves measured to sizes below the system’s optical resolution and to process the results in terms of fragmented rock, discounting the material coming from a loose overburden (natural fines) that is cast together with the fragmented rock. Automatic and manual operation modes of the image analysis are compared. The total fragmentation of a blast is obtained from the analysis of twenty photographs; a criterion for the elimination of outlier photographs has been adopted using a robust statistic. The limitations of the measurement system due to sampling, image processing and fines corrections are discussed and the errors estimated whenever possible. An analysis of consistency of the results based on the known amount of natural fines is made. Blasts with large differences in the amount of fines require a differentiated treatment, as the fine sizes tend to be the more underestimated in the image analysis as they become more abundant; this has been accomplished by means of a variable fines adjustment factor. Despite of the unavoidable errors and the large dispersion always associated with large-scale rock blasting data, the system is sensitive to relative changes in fragmentation.