数据采集中特征点粗差定位方法的探讨

本文分析了特征点应满足的几种条件，给出了一次范围最小（Ｌ１）法，最小二乘法以及粗差探测法进行特征点粗差定位方法，并以模拟实例为例对它们进行了比较，得出了一些有意义的结论。     

地质雷达在隧道检测中的应用

隧道施工完成后用常规方法很难对衬砌质量做出系统评价，地质雷达利用超高频脉冲电磁波探测目标介质的介电常数，很容易掌握砼衬砌结构的厚度、衬砌周围回填及空隙情况，围岩断层裂隙构造情况等，为工程技术评价提供依据。文章以实例，介绍了利用地质雷达对隧道进行检测所使用的仪器、工作参数及地质雷达资料处理解释步骤，并通过对几幅典型雷达图像进行分析介绍了不同异常结构在雷达剖面上的反映。     

近间距并行管线探测方法的效果对比

介绍了管线探测的几种方法,结合实例,对近间距并行管线的几种探测方法的效果进行了比较。     

Applicability of a Backprojection Algorithm to Reconstruct Images of Subsurface Horizontal Planes for Laboratory Experiments in Electrical Resistance Tomography

This paper describes the use of a backprojection algorithm to reconstruct subsurface images of the electrical resistivity in horizontal planes parallel to the surface. The algorithm can be applied to detect buried objects such as tanks or pipes and possible leakages from them. Two imaging strategies are compared: juxtaposition of vertical planes, and 3D reconstruction from the sensitivity matrix corresponding to the entire volume whose surface is explored. The electrode arrays used for voltage measurement are the dipole–dipole array and a modified Schlumberger array. A personal computer controls current injection, electrode switching, and voltage detection. The system injects 1 kHz, 20 V peak-to-peak square waveforms, thus avoiding electrode polarization effects. Experimental laboratory measurements show that the algorithm detects localized objects such as an insulating sphere and a conductive cylinder immersed in water. Furthermore, covering half of the cylinder by a rubber sleeve to simulate a nonconductive leak, yields a distinct image for the leak. The backprojection algorithm does not need any regularization parameter and it is very fast in inverting the sensitivity matrix because it approximates the inverse matrix by its transposed. The dipole–dipole array usually yields a lower overall pixel error than the modified Schlumberger array but both allow the detection of simulated underground leaks.     

Automatic Road Change Detection and GIS Updating from High Spatial Remotely-Sensed Imagery

This paper presents a tramework for road network change detectlon In order to upctate the Canadian National Topographic DataBase (NTDB). The methodology has been developed on the basis of road extraction from IRS-pan images (with a 5.8 m spatial resolution) by using a wavelet approach. The feature matching and conflation techniques are used to road change detection and updating. Elementary experiments have showed that the proposed framework could be used for developing an operational road database updating system.     

GIS数据辅助下的线状目标自动提取

首先介绍了遥感影像中线状目标骨架自动提取的意义和研究现状，然后结合老的GIS数据，提出了一种算法来实现遥感影像中线状目标骨架的自动提取，算法主要包括影像预处理、GIS数据与影像的配准、骨架跟踪、编组连接与数据简化等步骤。最后又利用遥感影像和相应的GIS数据进行了实验，实验证明了算法的可行性和有效性。     

基于典型相关分析的变化检测中变化阈值的确定

以东营市为例 ,把基于典型相关分析的方法运用于多时相遥感影像的变化检测中。对于变化阈值的确定 ,采用了一种基于贝叶斯理论的最小错误率的方法。这种方法实质上是一种非监督分类的方法 ,即不需要地面实况数据或其它先验知识 ,直接对典型相关处理后的差值图像进行分析计算得到阈值 ,使变化检测的错误率达到最小。实验结果证明了这种方法的有效性。     

利用热红外温差识别沙尘

沙尘识别是沙尘灾害监测和沙尘气溶胶特性研究的首要工作。利用辐射传输方程进行了沙尘气溶胶的辐射计算 ,对不同沙尘气溶胶光学厚度下的热红外通道温差ΔT(T11μm-T12 μm)的变化进行了分析。理论分析表明 ,利用热红外通道的温度差ΔT进行陆地沙尘识别是可行的。并利用NOAA AVHRR热红外通道的温度差ΔT进行了陆地沙尘识别的实验 ,经与地面气象站实测的沙尘天气现象相比较 ,结果一致。     

Fractally Invariant Distributions and an Application in Geochemical Exploration

Fractal modelling has been applied extensively as a means of characterizing the spatial distribution of geological phenomena that display self-similarity at differing scales of measurement. A fractal distribution exists where the number of objects exhibiting values larger than a specified magnitude displays a power-law dependence on that magnitude, and where this relationship is scale-invariant. This paper shows that a number of distributions, including power-function, Pareto, log-normal and Zipf, display fractal properties under certain conditions and that this may be used as the mathematical basis for developing fractal models for data exhibiting such distributions. Population limits, derived from fractal modelling using a summation method, are compared with those derived from more conventional probability plot modelling of stream sediment geochemical data from north-eastern New South Wales. Despite some degree of subjectivity in determining the number of populations to use in the models, both the fractal and probability plot modelling have assisted in isolating anomalous observations in the geochemical data related to the occurrence of mineralisation or lithological differences between sub-catchments. Thresholds for the main background populations determined by the fractal model are similar to those established using probability plot modelling, however the summation method displays less capacity to separate out anomalous populations, especially where such populations display extensive overlap. This suggests, in the geochemical data example provided, that subtle differences in the population parameters may not significantly alter the fractal dimension.