脊加载曲折波导行波管注波互作用的线性理论研究

提出了一类新型毫米波大功率微波器件——脊加载曲折波导行波管,推导出了引入电子注后的"热"色散方程.通过数值求解此方程,研究了加脊尺寸和电子注参数对小信号增益影响.计算结果表明:通过适当的尺寸设计和工作参数的选择,此结构在Kα波段具有18.51%的3 dB增益带宽和1.15 dB/周期的增益;相比于常规曲折波导结构,脊加载结构在保证一定带宽的情况下,具有更高的增益和电子效率;为了进一步提高增益,可以适当增加脊宽度和高度,也可在一定范围内增加电子注电流.     

AltiKa Radiometer: Instrument Description and In–Flight Performance

On 25 February 2013, the Satellite for Argos and AltiKa (SARAL) was launched from the Indian Sriharikota launch site. The AltiKa payload consisted of an altimeter and a radiometer. This paper describes the AltiKa radiometer. This instrument has been studied for several years by CNES, TAS-F, ASTRIUM-F and a set of science laboratories, and AltiKa is the first compact instrument embedding simultaneously the altimeter and radiometer functions. AltiKa radiometer is a dual frequency instrument working in K (23.8 GHz) and Ka band (37 GHz), it is based on the total power principle, with direct detection receivers. On-ground acceptance tests exhibited a very high level of performance: less than 0.2 dB has been estimated for both sensitivity and absolute accuracy in both frequencies. This paper focuses on the in-flight performances that have been observed since the launch. All the instrument observable characterizations are nominal, and in-flight sensitivity has been estimated lower than 0.2 K.     

珠江河口对外海潮波响应的固有频率研究——采用系统控制论方法

采用受控的自回归滑动平均模型(CARMA)分别研究了珠江河口洪、枯季对外海潮波响应的固有频率。枯季采用单输入单输出模型,洪季采用双输入单输出模型,通过验证、检验表明,模型(CARMA)可用于寻求复杂网河对外海潮波响应的固有频率,方法可靠,易操作。通过频率增益响应分析,发现枯季珠江河口的固有频率以浅水分潮频段为主,对应周期介于6~10.0 h之间,枯季固有频率未出现在全日潮波对应的频段。洪季珠江河口的固有频率也以浅水分潮频段为主,珠江河口对浅水分潮的系统增益响应幅值最大。固有频率接近浅水分潮频段的站点,枯季较洪季固有频率减小,对应周期延长。     

可操作的地震预测(OEF)国际研究动态综述

对目前国际上正持续开展的"可操作的地震预测"的研究动态,从主要关注的领域、"概率增益"概念的引入、混合模型研发及其在地震减灾中的应用等方面进行了重点介绍。由于OEF是在全球"地震可预测性合作研究"计划基础上逐步发展起来,具有重要的地震预测模型研发的技术基础以及解决地震减灾决策实际问题的实践基础,因此,相关研究动态和技术思路对我国的地震预测预报工作具有重要的启发和借鉴意义。     

Prediction of sediment yield by coupling Kalman filter with instantaneous unit sediment graph

An instantaneous unit sediment graph (IUSG) model in conjunction with Kalman filter was investigated for prediction of sediment yield from an upland watershed in Northwestern Mississippi. The state vector of the watershed sediment yield system was constituted by the IUSG and then the sediment yield was estimated by the IUSG model using Kalman filter. The initial values of the state vector were assumed as the average of the IUSG values and the initial sediment yield estimated from the average IUSG. The IUSG model using Kalman filter with a recursive algorithm accurately predicted sediment yield from watershed W‐5, Mississippi. The filter allowed the IUSG to vary in time, increased the accuracy of the IUSG model, and reduced physical uncertainty of the sediment yield process in the watershed. Copyright © 1999 John Wiley & Sons, Ltd.     

DL脑电地形图仪系统研制

阐述了脑电生理信号检测中,注重低噪声电路设计的同时,特别注重放大器的工艺设计,及应用微机对脑电信号功率谱分析、插值、脑电地形图绘制等系统研制的技术路线和方法。     

Cumulative gain and lift charts for model performance assessment in mineral potential mapping

Model performance assessment is a key procedure for mineral potential mapping, but the corresponding research achievements are seldom reported in literature.Cumulative gain and lift charts are well known in the data mining community specialized in marketing and sales applications and widely used in customer churn prediction for model performance assessment.In this paper, they are introduced into the field of mineral potential mapping for model performance assessment.These two charts can be viewed as a graphic representation of the advantage of using a predictive model to choose mineral targets.A cumulative gain curve can represent how much a predictive model is superior to a random guess in mineral target prediction.A lift chart can express how much more likely the mineral targets predicted by a model are deposit-bearing ones than those by a random selection.As an illustration, the cumulative gain and lift charts are applied to measure the performance of weights of evidence, logistic regression, restricted Boltzmann machine, and multilayer perceptron in mineral potential mapping in the Altay district in northern Xinjiang in China.The results show that the cumulative gain and lift charts can visually reveal that the first three models perform well while the last one performs poorly.Thus, the cumulative gain and lift charts can serve as a graphic tool for model performance assessment in mineral potential mapping.     

基于仿生硬件的无线传感器网络节点自修复方法

针对现有无线传感器网络节点硬件固定,不能重新配置的问题,设计了一种全新的基于仿生硬件的无线传感器网络节点自修复方法,采用仿生硬件实现动态可重构无线传感器网络节点,以使节点能够自主地、动态地改变自身的结构和行为,在其部分硬件失效情况下进行节点的仿生自修复.该研究提出了相关节点的仿生自修复方法,研制了基于现场可编程阵列的仿生自修复节点,并通过实验验证了节点的自修复能力.对于提高无线传感器网络的鲁棒性和安全性具有重要意义.     

13．7m抛物面天线增益测量和太阳射电流量密度定标

以新月时月亮的射电辐射为温度基准和准口面温度定标的方法，在２２ＧＨｚ频率上于１９９３年７月～３月测量了１３．７ｍ射电望远镜抛物面天线的增益。根据测量的增益值（６７．１０─±０．０７ｄｂ）定标了太阳射电流量，流量测量的系统差为±５．８％，偶然差为±２．７％，测量的宁静太阳亮温度（非源区）为１０１００±３００Ｋ。除此之外，还推导和计算了不同源模型下的天线方向图改正因子Ｋｓ，并计算了太阳射电源的流量密度。     

Long-term gain changes in mercury-level tiltmeters of the Stacey type

A uniaxial mercury-level short baselength tilt transducer constructed at the University of Alberta is described. The design closely follows the differential capacitance tiltmeter ofStacey et al. (1969), but differs in that aluminum is used for the beam, and how the mercury cups are supported beneath the beam. It also allows gain verification by comparison of the direct capacitances with a known capacitance. It has been found that the gain factor for the instrument changes with time, because of the relaxation of the mercury surfaces. This has been monitored for several years for four instruments at two sites. The gains change rapidly for several months after installation, but more slowly as time progresses. The magnitudes of such changes in instruments of this type may be as large as 3 percent.