Re-Os Age of Cu-Ni Ores from the Huangshandong Cu-Ni Sulfide Deposit in the East Tianshan Mountains and Its Implication for Geodynamic Processes

An isochron age of 282±20 (95% conf. limit) Ma of the sulfide ores in the Huangshandong Cu-Ni sulfide deposit, the East Tianshan Mountains has been obtained through Re-Os isotopic measurement. The age implies that the Cu-Ni sulfide deposit and other related deposits in the same area occurred in a Permian extensional environment of post-collision instead of Devonian-Early Carboniferous ophiolite-related oceanic or island arc environments inferred before. It shares the same ages with the orogenic and epithermal gold deposit systems in the same area. An initial 187Os/188Os ratio of 0.25±0.04 (1σ) and a γos value of 99 on average display the participation of large quantities of crustal components into the rock-forming and ore-forming system during mineralization and magmatic emplacement.     

略阳煎茶岭铜镍硫化物矿床Re—Os同位素年龄及其地质意义

采用矿石Re-Os同位素方法对陕西省煎茶岭硫化镍矿床矿石进行了成矿年代学研究,获得了878士27 Ma(1σ)的等时线年龄,首次厘定了该矿床成矿时代为新元古代,成岩成矿基本同时.通过对878 Ma硫化镍矿石初始Re-Os同位素体系的γOs计算和Re/Os值分析表明,其yOs和Re/Os值变化范围大,深部条带状矿石的Re/Os值仅为0.05,yOs为-6.70;块状矿石的Re/Os值范围为4.24～24.43,γOs为-15.37～+280.65,说明成矿过程中有壳源物质的混染;两件样品的γOs为负值(-15.37,-6.70),可能指示其超镁铁质岩浆来源于Re亏损地幔.煎茶岭超基性岩体年龄及其镍矿石的Re-Os等时线年龄与扬子克拉通北缘火山岩浆活动时间相对应,它们是扬子克拉通西北缘晋宁期构造岩浆成矿作用的产物.     

中子活化分析在铼—锇法年龄测定中的应用

同位素稀释中子活化分析铼与感耦等离子体质谱法测定锇相结合，应用于辉钼矿及铜＿镍硫化物矿物的铼＿锇年龄测定，取得了满意的结果，扩大了铼＿锇测年法的应用范围。     

利用不纯净十水芒硝与纯净氯化钾制取硫酸钾的研究

本文通过相图分析，对利用不纯净十水芒硝与纯净氯化钾通过二步转化制取硫酸钾进行了物料配比计算．给出了最佳物料配比及十水芒硝中氯离子的最大含量，对实际生产有指导意义。     

建德铜矿床的海底喷流沉积成因

建德铜矿床是浙江西部多金属成矿带中一个引人瞩目的重要矿床。它产于中石炭统底部伴有火山岩、硅质岩和碧玉岩的白云岩中。整合块状矿体之下有一筒状矿化蚀变带。其成分以Ｃｕ＞Ｚｎ＞Ｐｂ为特征。根据矿床地质、地球化学特征以及近年来研究所获得资料，认为该矿床属海底喷流沉积成因     

内蒙古镁铁质-超镁铁质岩型铜镍矿床成矿条件与找矿远景分析

按构造环境控岩控矿特点,划分区内铜镍型矿成矿(岩)带,分析成矿条件,研究了与该类矿床成矿有关的镁铁质岩、超镁铁质岩分布规律及铜镍硫化物成矿特征,提出了找矿方向和建议.     

石岭沟-拐道沟铜-铅-锌多金属成矿带成矿地质条件分析

成矿带位于北秦岭北部晚元古代-早古生代裂谷带南缘的变质火山岩区，受油房-皇台断裂的次级分支断裂及燕山-印支期的侵入岩体及次火山岩脉的联合控制，成矿地质条件与甘肃白银厂铜-铅-锌矿田相类似，成矿带内地表已发现多条铜-铅-锌矿(化蚀变)体，找矿潜力较大，只要进一步深入开展工作，有望找到与白银厂铜-铅-锌矿田相类似的大型一超大型铜-铅-锌多金属矿床。     

Chemical Composition of Ores from the Takara Volcanogenic Massive Sulfide Deposit, Central Japan

Abstract. The Takara volcanogenic massive sulfide (VMS) deposit occurs in Miocene formation of the Misaka Mountain, the South Fossa Magna region, central Japan. The tectonic setting of the Misaka Mountain is reconstructed to be a part of the paleo Izu-Ogasawara arc which collided with the Honshu arc and to form accreted body in the present position. The Takara deposit, therefore, is considered to have formed in the paleo Izu-Ogasawara arc.
The ores from the Takara deposit are classified into pyrite-type ore, chalcopyrite-type ore, and sphalerite-type ore on the basis of chemical composition and their mineral assemblages. Some pyrite-type ores are characterized by their high Au content. The Au content is hardly recognized in the chalcopyrite-type and sphalerite-type ores.
The ores from the Takara deposit have intermediate bulk chemical composition between those from the Besshi-type deposits and the Kuroko-type deposits that are two representative VMS deposits. However, the bulk chemical composition is closer to that from the Kuroko-type deposits. And moreover, chemical composition of tetrahedrite-tennantite series minerals (tetrahedrite) is similar to that from the Kuroko-type deposits. The bulk chemical composition (Cu, Zn, Co, Pb, and As contents) of ores is affected by the chemical composition of volcanic rocks associated with VMS deposits.     

High-pressure experimental growth of diamond using C–K2CO3–KCl as an analogue for Cl-bearing carbonate fluid

High-pressure, high-temperature diamond growth experiments have been conducted in the system C–K₂CO₃–KCl at 1050–1420 °C, 7.0–7.7 GPa. KCl is of interest because of the strong effect of halogens on the phase relations of carbonate-rich systems [Geophys. Res. Lett. 30 (2003) 1022] and because of the occurrence of KCl coexisting with alkali silicate–carbonate fluids in natural-coated diamond [Geochim. Cosmochim. Acta 64 (2000) 717]. We have used system C–K₂CO₃–KCl as an analogue for these mantle fluids in diamond growth experiments. The presence of KCl reduces the potassium carbonate liquidus to ≤1000 °C at 7.7 GPa, allowing it to act as a solvent catalyst for diamond growth at temperatures below the continental geotherm. This is a reduction on the minimum diamond growth temperature reported in the alkali-carbonate–C–O–H system [Lithos 60 (2002) 145]. Diamond growth using carbonate solvent catalysts is characterised by a relatively long induction period. However, the addition of KCl also reduced the period for diamond growth in carbonate to 5 min; no such induction period appears to be necessary. It is suggested that KCl destabilises carbonate, allowing greater solubility and diffusion of carbon.     

Lead-arsenic soil geochemical study as an exploration guide over the Killik volcanogenic massive sulfide deposit, Northeastern Turkey

A mountainous terrain, the eastern Pontide tectonic belt, located in northeastern Turkey, contains more than 60 known volcanogenic massive sulfide (VMS) deposits that differ in reserves (0.1–30 million tonnes) and grades. Soil geochemistry is conventionally used in exploration programs to discover concealed VMS deposits in the region. In the present study, Pb and As element pair were used as pathfinder elements to investigate the relationship of their anomalies to a completely delineated ore deposit (Killik VMS deposit) in an orientation survey that served as a natural physical model. Two hundred forty soil samples were analyzed in the present study. The two elements, which represent the opposite ends of the mobility range, revealed high contrast and overlapped each other at the location of the ore deposit due to enhancement of the anomalies by hydromorphic dispersion, which is an indication that soil samples would produce reliable results. The successful delineation of the deposit is remarkable considering the rough topography and the climatic limitations. Previously the extremely moist and temperate climate was thought to cause excessive leaching of the trace element pathfinders from the ore deposits to produce extensive anomalies usually extending away from the mineralization thus, leading to erroneous results and/or extensive anomalous areas. But the present research has shown that the method can be used effectively if the sampling and data evaluation is carefully conducted.