Influence of Structural Non-Stationarity of Surface Roughness on Morphological Characterization and Mechanical Deformation of Rock Joints

Summary Structural non-stationarity of surface roughness affects accurate morphological characterization as well as mechanical behaviour of rock joints at the laboratory scale using samples with a size below the stationarity threshold. In this paper, the effect of structural non-stationarity of surface roughness is investigated by studying the scale dependence of surface roughness and mechanical behaviour of rock joints. The results show that the structural non-stationarity mainly affects the accurate characterization of the surface roughness of the fracture samples. It also controls the amount and location of the contact areas during shear tests, which in turn affects the mechanical properties and asperity degradation of the samples. It is concluded that for accurate determination of the morphological and mechanical properties of rock joints at laboratory and field scales, samples with size equal to or larger than the stationarity threshold are required. Author’s address: Nader Fardin, Rock Mechanics Group, Department of Mining Engineering, Faculty of Engineering, University of Tehran, P.O. Box: 11365/4563, Tehran, Iran     

Soil erosion susceptibility assessment and validation using a geostatistical multivariate approach: a test in Southern Sicily

A certain number of studies have been carried out in recent years that aim at developing and applying a model capable of assessing water erosion of soil. Some of these have tried to quantitatively evaluate the volumes of soil loss, while others have focused their efforts on the recognition of the areas most prone to water erosion processes. This article presents the results of a research whose objective was that of evaluating water erosion susceptibility in a Sicilian watershed: the Naro river basin. A geomorphological study was carried out to recognize the water erosion landforms and define a set of parameters expressing both the intensity of hydraulic forces and the resistance of rocks/soils. The landforms were mapped and classified according to the dominant process in landsurfaces affected by diffuse or linear water erosion. A GIS layer was obtained by combining six determining factors (bedrock lithology, land use, soil texture, plan curvature, stream power index and slope-length factor) in unique conditions units. A geostatistical multivariate approach was applied by analysing the relationships between the spatial distributions of the erosion landforms and the unique condition units. Particularly, the density of eroded area for each combination of determining factors has been calculated: such function corresponds, in fact, to the conditional probability of erosion landforms to develop, under the same geoenvironmental conditions. In light of the obtained results, a general geomorphologic model for water erosion in the Naro river basin can be depicted: cultivated areas in clayey slopes, having fine-medium soil texture, are the most prone to be eroded; linear or diffuse water erosion processes dominate where the topography is favourable to a convergent or divergent runoff, respectively. For each of the two erosion process types, a susceptibility map was produced and submitted to a validation procedure based on a spatial random partition strategy. Both the success of the validation procedure of the susceptibility models and the geomorphological coherence of the relationships between factors and process that such models suggest, confirm the reliability of the method and the goodness of the predictions.     

Effect of Inter-Column Spacing on Soil Stresses due to Vibro-Installed Stone Columns: Interesting Findings

This paper reveals the interesting relation between the inter-column spacing and the corresponding alteration of soil state of stresses due to the vibro-installation technique. This relation is inferred from analyses for load settlement records of various field load tests, performed for stone columns arrangements with different inter-column spacing values. In order to have adequate confidence in the findings, a well-documented case history, involving three columns patterns along with their relevant field and laboratory test results, is utilized for this study. Moreover, a well-tested finite element model, capable of simulating both elasto-plastic and time dependent soil deformations as well as pore water pressure building and dissipation, is employed in the analysis. Instead of determining the soil response to the test load, based on known initial soil stresses and material properties, the analysis is inversely posed to determine the soil initial stresses, based on the recorded settlements and the post-installation material properties. The alteration in the soil state of stress is represented by the increase in the post-installation horizontal to vertical stress ratio, K*, as a function of the inter-column spacing. It is found that this alteration experiences a systematic decrease in its magnitude as the inter-column spacing increases.     

江苏潮滩沉积物激光粒度仪与移液管-筛析分析结果的对比

激光粒度仪的广泛应用带来了与历史数据的对比问题,因此需要建立激光粒度仪与早期分析结果之间的关系。根据江苏海岸潮滩沉积物样品的激光粒度仪和移液管-筛析法分析,对粒度参数、粒度组分等进行了对比,对两种方法的差异进行了分析。结果表明,对于江苏潮滩沉积物粒度参数中平均粒径的激光粒度仪与移液管-筛析分析结果之间有良好的线性关系;筛分法测得的粗颗粒物质较激光法偏少,而移液管法法测得的细颗粒物质较激光法偏多;将样品分类之后再进行两种方法所获粒度参数的回归分析,相关性得以提高,说明不同粒度组成的沉积物对分析结果的对比有不同的影响。两种方法之间的换算关系不仅与研究区域有关,而且与沉积物本身的粒度组成有关。     

新疆北部库尔提蛇绿岩中角闪片岩的原岩恢复及其成因

库尔提角闪片岩产于库尔提蛇绿岩南部岩片中,与斜长花岗岩呈互层产出。这套角闪片岩的不相容微量元素组分显示了大洋中脊和岛弧玄武岩的双重特征,主要表现为大离子亲石元素(LILE)富集,高场强元素(HFSE)亏损以及平坦到亏损的轻稀土(LREE)配分模式。原岩恢复的结果表明,该角闪片岩的原岩为亚碱性的拉斑玄武岩类。库尔提角闪片岩亏损的LREE、高ε_(Nd)(t),以及关键元素比值(Th/Nb,La/Yb和Th/Yb)呈正相关都表明,其源区可能以MORB地幔为主,同时还伴有少量弧组分。因此,我们认为其形成于弧后盆地环境,同时推断该区弧后盆地存在一个二阶段的熔融演化模式:第一阶段,大约在晚古生代早期,古亚洲洋向西伯利亚板块发生北向俯冲,在会聚板块边界,弧火山岩被从含水的地幔楔中提取出来,留下一个亏损地幔;第二阶段,随着古亚洲洋板块持续消减,在中-晚泥盆世形成了库尔提弧后盆地,下部的亏损地幔发生了小比例的部分熔融形成了这套角闪片岩的原岩。     

三峡库区生基包滑坡监测及成果分析

生基包滑坡监测属于三峡库区奉节县三期地质灾害监测预警项目之一,该滑坡位于长江左岸,临近人口稠密的安坪乡集镇,地理位置重要。三峡水库175 m蓄水后,其变形破坏特征有何表现？对航道安全运营有无潜在威胁？是否会对滑坡体上的重要建筑及村民生产生活构成危害？针对这些问题,首先分析了滑坡的工程地质特征及主要的影响因素;其次,确立以4种监测手段为主、人工巡查为辅的监测方案;通过对大地变形GPS、深部位移、滑坡推力等几种监测方法的运用及对其成果进行分析研究,以实例说明其在滑坡监测中的应用;再次,结合宏观人工巡查进行对照分析,以充分说明大地变形、深部位移和滑坡推力监测在实际运用中的可行性;最后,根据监测结论提出对生基包滑坡防治的建议。     

滑坡体三维地质建模与可视化分析

针对滑坡地质研究的自身特点,提出了面向滑坡地质体三维建模的NURBS-BRep混合数据结构和地质结构单元实体构造技术.通过对滑坡基础地质数据的预处理、滑坡数字地形和滑动面的三维建模、地质结构面的系统构造、地质结构体的生成和显示,形成了一套完整的滑坡三维地质模型的构建方法.将该方法应用于某水库滑坡,建立了相应的三维滑坡地质模型,并基于此模型进行了三维剖切分析、数字钻孔、等值线生成、滑块自动剖分、滑坡失稳可视化动态模拟和滑坡体方量精确计算等一系列实用的可视化分析,为滑坡稳定性的准确计算和客观评价提供了有力的支持.     

盘山山前地下水与矿泉水污染成因分析

文章利用主成分分析方法,结合揭示变量和样品之间在成因或空间上联系的对应分析,通过SPSS统计分析软件,对盘山山前地区地下水和矿泉水污染成因进行分析。研究表明,盘山山前存在地下水和矿泉水污染;局部范围的污染主要是由于食品厂等企业的排污引起的,污染成分主要是Cl-和NO3—N,主要污染地区是塔院地区,其次是西大佛塔至南营,污染程度与至污染源的距离有关;大部分地区存在三氮面状污染,农业氮肥的施用是其主要原因。     

新疆准噶尔盆地西北缘吐谷鲁群沉积体系分析

根据在新疆准噶尔盆地西北缘乌尔禾-夏子街地区的野外地层露头观察、追索及钻孔资料分析研究,笔者认为,该区下白垩统吐谷鲁群是一套以灰绿色砂岩和红色、棕红色泥岩组成的干燥气候条件下形成的内陆湖相碎屑沉积,发育浅水三角洲体系,主要由三角洲平原和三角洲前缘相组成.吐谷鲁群碎屑岩的碎屑粒度由下而上可分为两个大的韵律旋回,即粗-细-粗-细,反映了水体扩展到萎缩再扩展的过程.有利铀成矿的砂岩层主要集中在两个韵律旋回的底部,形成于三角洲平原分流河道、决口扇、三角洲前缘水下分流河道和水下堤环境.     

塔里木盆地寒武-奥陶系白云岩结构构造类型及其形成机理

塔里木盆地寒武-奥陶系白云岩度大、分布广,是重要的油气储集层.根据岩石学研究并结合地球化学特征将其分为4类,其特点如下:(1)泥晶-粉晶白云岩,白云石晶体小、晶形差,有序度在4类中最低(0.73);Na、K、Sr含量在4类中最高;δ13C值及Z值较高,分别为-0.94‰、122.3;Fe、Mn含量较低;阴极发光为亮桔红色;常呈纹层状,具暴露及成化标志.这些特征表明其结晶较快,形成环境蒸发强烈、盐度较高、氧化性较强,是在萨布哈环境中由浓缩海水发生白云石化所形成.(2)藻纹层白云岩,白云石晶体小,晶形较好,有序度较高(0.85);藻纹层基本保留了其原始微细结构;Na、K、Sr含量较低:δC值在4类中最高,平均为-0.50‰;含有较多黄铁矿.这些特征说明其可能形成于成岩作用的稍早期阶段且其成因与藻类活动密切相关,成岩环境盐度较低,可能是在藻类作用下,由富藻层浓集的镁与残留海水在浅埋藏环境中共同作用所形成.(3)雾心亮边白云岩,白云石普遍具雾心亮边结构,雾心含少量包裹体及灰质残余,亮边则少见或无;阴极发光下,雾心发亮桔黄色光,亮边发光暗或不发光;局部见此类白云石;呈星散状分布于亮晶颗粒灰岩或泥晶灰岩中;白云石晶体较大,晶形较好.此类白云岩的δ13C及Z值在4类中最低,K、Na、Sr、Fe含量相对较低,Mn含量最高;有序度较高,均值为0.83.这些特征表明此类白云岩中白云石的雾心可能是在早期浅埋藏环境中,由富镁孔隙水交代周围灰质所形成;亮边则形成于埋藏较深的环境,其所需镁可能来源于粘土矿物的转化.(4)重结晶白云岩:白云石晶体粗大且污浊,接触紧密;局部见白云石晶体具环带结构,局部见颗粒幻影结构;阴极发光较暗;Fe含量在4类中最高,Mn含量较高;有序度最高,平均为0.95;包裹体均一温度平均为110.2℃.这些特征表明其可能是在还原性较强的深埋藏环境中,由早期形成的白云岩经较强的重结晶作用所形成.