某隔震结构动力特性的理论分析与脉动测试

本文针对国内最大单体隔震建筑建立了SAP2000三维分析模型,并进行了动力特性的理论分析;现场对实际建筑进行了平移振动、扭转振动、垂直振动和平面内弯曲4个方面的脉动测试。利用工程振动反演理论分析了该结构的固有频率、振型、阻尼等动力特性,将实测结构动力特性与理论分析结果进行比较,详细分析实测结果与理论结果差别的原因,并据此对理论模型进行修正,为今后类似结构的设计积累了资料。     

基于等高线数据的地性线追踪技术研究

通过研究特征点的提取技术和建立系统的特征点匹配的数学模型，研究了基于矢量等高线数据的地性线的自动追踪技术，利用所述方法，提取的特征点完整，准确；理论和实验表明，所建立的数学模型简捷，实用，有可靠的数学理论基础，且地性线追踪效果良好。     

雷达图像中的转换构造信息及其应用

低序次断裂是地壳变形的直接产物，具有丰富的构造变形信息，经过转换的低序次构造。形式多样，图案复杂，是构造研究的重要对象，也是地表稳定性研究的重要基础。利用香港地区航空雷达图像资料，提取其中低序次构造的弱信息，建立转换变形模型，以分析区内不稳定地表的构造背景。区内北东向断裂是主要构造，其右行剪切形成一系列低序次R面，P面，R^1面构造，在雷达图像上表现为线性弱信息并且与微地貌发育有关。利用线性构造增强，提取技术和低序次构造组合分析方法，结合野外地质调查，确定马鞍山地区EW向的张性破裂是NE向张剪断裂的转换，是造成马鞍山滑坡的重要地质因素。     

贵池铜山铜矿床成因探讨

铜山铜矿床矿化类型可划分为层状含铜黄铁矿型，含铜角砾岩型，含铜夕卡岩型和含铜班岩型，控矿因素为地层，岩浆岩及构造，其中层间断裂与接触带构造是主要的容矿构造，铅，硫，氢，氧同位素特征及成矿温度研究表明矿物质和热液主要来源于铜山岩体，矿床成因为层控夕卡岩型铜矿床。     

帕米尔东北缘及塔里木盆地西北部弧形构造的扩展特征

归纳了帕米尔东北缘弧形构造的基本特征 ,分析了塔里木盆地西北部EW向逆断裂背斜带与NNW向隐伏走滑断裂之间的关系。通过塔里木盆地与西南天山和帕米尔东北缘变形特征的对比 ,认为塔里木盆地西北部的变形样式与帕米尔东北缘的弧形构造类似 ,弧形构造具有由帕米尔东北缘向塔里木盆地扩展的特征 ,这种构造是帕米尔向北挤入运动所特有的变形样式     

Wave propagation in a seven-story reinforced concrete building: I. Theoretical models

For transient, high frequency, and pulse like excitation of structures in the near field of strong earthquakes, the classical design approach based on relative response spectrum and mode superposition may not be conservative. For such excitations, it is more natural to use wave propagation methods. In this paper (Part I), we review several two-dimensional wave propagation models of buildings and show results for theoretical dispersion curves computed for these models. We also estimate the parameters of these models that would correspond to a seven-story reinforced concrete building in Van Nuys, California. Ambient vibration tests data for this building imply vertical shear wave velocity β_z=112 m/s and anisotropy factor β_x/β_z=0.55 for NS vibrations, and β_z=88 m/s and β_x/β_z=1 for EW vibrations. The velocity of shear waves propagating through the slabs is estimated to be about 2000 m/s. In the companion paper (Part II), we estimate phase velocities of vertically and horizontally propagating waves between seven pairs of recording points in the building using recorded response to four earthquakes.     

Pounding of structures modelled as non‐linear impacts of two oscillators

A new formulation is proposed to model pounding between two adjacent structures, with natural periods T₁ and T₂ and damping ratios ζ₁ and ζ₂ under harmonic earthquake excitation, as non‐linear Hertzian impact between two single‐degree‐of‐freedom oscillators. For the case of rigid impacts, a special case of our analytical solution has been given by Davis (‘Pounding of buildings modelled by an impact oscillator’ Earthquake Engineering and Structural Dynamics, 1992; 21 :253–274) for an oscillator pounding on a stationary barrier. Our analytical predictions for rigid impacts agree qualitatively with our numerical simulations for non‐rigid impacts. When the difference in natural periods between the two oscillators increases, the impact velocity also increases drastically. The impact velocity spectrum is, however, relatively insensitive to the standoff distance. The maximum relative impact velocity of the coupled system can occur at an excitation period T_n^* which is either between those of the two oscillators or less than both of them, depending on the ratios T₁/T₂ and ζ₁/ζ₂. Although the pounding force between two oscillators has been primarily modelled by the Hertz contact law, parametric studies show that the maximum relative impact velocity is not very sensitive to changes in the contact parameters. Copyright © 2001 John Wiley & Sons, Ltd.     

ENSO循环的数值模拟──Ⅰ:水平结构演变

利用发展的包含海洋表面边界展和大气辐合反馈过程的热带太平洋海气耦合距平模式，对ＥＮＳＯ循环进行了模拟。通过３０ａ积分，用合模式所展示的热带太平洋海气耦合系统的ＥＮＳＯ循环的水平结构演变特征和观测事实甚为一致，成功地模拟出了ＥＮＳＯ循环的冷暖态的发生发展、衰亡及相互转换等各个位相的动力和热力场的水平结构及其对季节循环的依赖性特征。本文数值模拟结果表明，ＥＮＳＯ循环的主要动力学过程可由热带海气相互作用系统自身所确定。ＥＮＳＯ循环的正确模拟是揭示其形成机制的前提。     

火箭观测到的中层垂直速度扰动细微结构

使用一枚携带ｃｈａｆｆ的火箭观测到的垂直速度数据，研究中层大气垂直速度扰动细微结构。结果表明，垂直速度扰动有明显的层状结构，各层厚度约１５０－５００ｍ，层间垂直分离距离在几百米到１－３ｋｍ间。在垂直速度方差和低Ｒｉ数峰值间以及动力不稳定和ＭＳＴ雷达回波区域间有好的对应关系。水平速度垂直波数谱与饱和谱在谱斜率和谱振幅上存在好的一致．这些观测结果表明，火箭测量到的细微结构可以用波场饱和解释。     

Deterministic sliding block methods for estimating seismic displacements of earth structures

A review and quantitative comparison of existing deterministic sliding block methods for predicting permanent displacements of earth structures subjected to seismic loading is presented. The reviewed sliding block methods are divided into two main groups based on the characteristic earthquake parameters referenced in each method. One group uses the maximum horizontal ground acceleration and velocity, and the other uses the maximum horizontal ground acceleration and the predominant period of the acceleration spectrum. Displacement functions published by previous authors are reformulated to give common non-dimensionalized displacement functions of the critical acceleration ratio which are then used to compare the different methods for the estimate of permanent seismic displacement of soil structures. The results show that despite the fact that the different methods were formulated using a wide range of earthquake records and different characteristic seismic parameters, permanent displacement values predicted using these methods fall within a reasonably narrow band. Selected acceleration data from three recent earthquakes that occurred in California are used to evaluate and compare the accuracy of the reviewed displacement methods for practical applications.