鲜水河断裂带炉霍段的水平运动及地震的重复性研究

本文讨论了鲜水河活动断裂带炉霍段的水平断错、古地震遗迹与地震重复间隔等问题。晚更新世以来断裂的平均滑动速率为13毫米/年。全新世中期以来大震的重复间隔时间小于600年     

利用p~3软件进行GPS单点定位解算的若干问题

利用p3软件对大量实测数据进行了高精度单点定位有关问题的验证和分析;在IGS提供的精密星历和卫星钟差产品中,较为深入地比较分析了快速产品和几种最终产品的定位精度、收敛速度及p3软件的正反算结果精度。得出以下结论:快速产品与最终产品的定位精度和收敛速度相似;COD的收敛速度和定位精度最高;p3软件的反算精度明显优于正算,且精度也比较均匀。这些研究成果对PPP技术的实际应用具有较好的借鉴意义。     

重金属污染胁迫下盐肤木的生化效应及波谱特征

利用遥感生物地球化学的原理和方法,分析了德兴铜矿的重金属污染状况和植物盐肤木的生物地球化学效应,对盐肤木生物地球化学效应的波谱特征进行了系统的提取和分析.研究发现酸、铜、镉等是德兴铜矿地区主要的环境污染因子,野外调查及样品的化验分析表明盐肤木对铜元素呈现一定的富集作用和很强的位移效应,是适合铜矿复垦的植被.利用导数光谱、包络线去除、红边效应、植被指数等光谱信息处理方法对盐肤木的野外波谱分析表明,随着叶片中Cu等金属元素含量的增大,其产生的毒化效应的波谱特征越明显,盐肤木叶片光谱反射率明显升高,波形蓝移,红边陡坡斜率增大,叶绿素吸收深度变浅,吸收中心稍有蓝移,水的吸收深度变浅,吸收中心位置红移,绿度指数变化明显.对波谱特征及其与重金属含量的相关关系综合分析后认为,红边特征、植被指数NDVI、叶绿素吸收深度与叶片铜含量关系显著,可以作为植被铜污染遥感图像特征提取的参考.     

中国西部现今地壳形变与地震活动特征

以1999-2004年间中国西部地区近650个GPS站点的观测资料为基础,采用二维“高张力样条”函数内插算法获得了连续地壳形变场。结果表明,相对于稳定欧亚参考框架,中国西部现今地壳运动西强东弱,北向运动从西向东逐渐减弱,东向运动逐渐增强,青藏高原东缘及附近地区是东向运动的消减区带;主应变从西向东由压缩应变转变为拉伸应变;最大剪应变主要位于喜马拉雅地块及其东部地区;中国西部地区地震活动在空间分布上似乎集中发生在印度板块北东向挤压欧亚板块的两条共扼带内,与地壳形变场有一定对应关系,地壳形变的高应变率区为中强地震多发地带。     

基于贡献权重迭加法的滑坡风险区划

贡献权重迭加法是对滑坡本底因子和承灾体因子在滑坡发育中的贡献率进行统计后,通过贡献率均值化、规一化处理,利用权重转换模型计算出每一个因子内部的权重——自权重W和因子相互之间的权重——互权重W＇。将滑坡因子、承灾体因子和两者的自权重、互权重分别相乘迭加,得到滑坡危险度和易损度区划结果,再将2项结果相乘得出滑坡风险区划。     

青藏高原西北缘祁漫塔格山中新世快速抬升 的磷灰石裂变径迹证据

对祁漫塔格山体不同海拔高度所取的9个磷灰石样品的裂变径迹分析结果表明,东昆仑西段中新世早中期为主要的隆升期且隆升速率较高,早期隆升速率为111m／Ma,晚期隆升速率为98m／Ma,总体隆升速率为100m／Ma。样品显示出磷灰石裂变径迹长度大致分2类,一类磷灰石裂变径迹长度为（12．21±10．20）-（13．75±0．30）μm,径迹长度分布图基本上为窄而对称的正态分布,反映具有快的剥露冷却速率,未受到后期热事件的干扰。另一类磷灰石裂变径迹长度为（11．88±0．33）～（13．32±0．27）μm,较前一类具有稍慢的剥露冷却速率,并且受到了后期热事件的干扰。     

Actinic flux and photolysis frequency comparison computations using the model PHOTOGT

The accurate radiative transfer model GOMETRAN, initially designed to yield radiances at TOA in the wavelength range 240–790 nm, has been extended to allow for the computation of actinic fluxes down to 175 nm and for the calculation of photolysis frequencies in the atmosphere. The capability of the extended model PHOTOGT (PHOTOGOMETRAN) is demonstrated in a number of successful comparison studies both with recent experiments (ground-based, balloonborne, airborne) and model calculations of radiances, actinic fluxes and photolysis frequencies in the stratosphere and troposphere. In an atmospheric case study, the impact of new quantum yield data for the O₃ » O₂+O(¹ d) photodissociation channel on the photolytic production of O(¹ d) atoms in the lower atmosphere has been quantified.     

关于海平面上升及其环境效应

沿海地区地质环境复杂。由于国民经济的迅速发展,人类活动日益增多,对地质环境进一步造成严重的不利影响。特别是“温室效应”引发的海平面上升,使各种地质灾害更加激化。文章详细探讨了海平面上升的影响因素,理论海平面与相对海平面升降幅度的评估,以及海平面上升所造成的地质环境效应与相应的防治对策,特别强调控制沿海城市地面沉降,以减轻海平面相对上升造成的危害,具有特殊而重要的意义。     

Rupture process of large earthquakes in the northern Mexico subduction zone

The Cocos plate subducts beneath North America at the Mexico trench. The northernmost segment of this trench, between the Orozco and Rivera fracture zones, has ruptured in a sequence of five large earthquakes from 1973 to 1985; the Jan. 30, 1973 Colima event (M _s 7.5) at the northern end of the segment near Rivera fracture zone; the Mar. 14, 1979 Petatlan event (M _s 7.6) at the southern end of the segment on the Orozco fracture zone; the Oct. 25, 1981 Playa Azul event (M _s 7.3) in the middle of the Michoacan gap; the Sept. 19, 1985 Michoacan mainshock (M _s 8.1); and the Sept. 21, 1985 Michoacan aftershock (M _s 7.6) that reruptured part of the Petatlan zone. Body wave inversion for the rupture process of these earthquakes finds the best: earthquake depth; focal mechanism; overall source time function; and seismic moment, for each earthquake. In addition, we have determined spatial concentrations of seismic moment release for the Colima earthquake, and the Michoacan mainshock and aftershock. These spatial concentrations of slip are interpreted as asperities; and the resultant asperity distribution for Mexico is compared to other subduction zones. The body wave inversion technique also determines theMoment Tensor Rate Functions; but there is no evidence for statistically significant changes in the moment tensor during rupture for any of the five earthquakes. An appendix describes theMoment Tensor Rate Functions methodology in detail.The systematic bias between global and regional determinations of epicentral locations in Mexico must be resolved to enable plotting of asperities with aftershocks and geographic features. We have spatially shifted all of our results to regional determinations of epicenters. The best point source depths for the five earthquakes are all above 30 km, consistent with the idea that the down-dip edge of the seismogenic plate interface in Mexico is shallow compared to other subduction zones. Consideration of uncertainties in the focal mechanisms allows us to state that all five earthquakes occurred on fault planes with the same strike (N65°W to N70°W) and dip (15±3°), except for the smaller Playa Azul event at the down-dip edge which has a steeper dip angle of 20 to 25°. However, the Petatlan earthquake does prefer a fault plane that is rotated to a more east-west orientation—one explanation may be that this earthquake is located near the crest of the subducting Orozco fracture zone. The slip vectors of all five earthquakes are similar and generally consistent with the NUVEL-predicted Cocos-North America convergence direction of N33°E for this segment. The most important deviation is the more northerly slip direction for the Petatlan earthquake. Also, the slip vectors from the Harvard CMT solutions for large and small events in this segment prefer an overall convergence direction of about N20°E to N25°E.All five earthquakes share a common feature in the rupture process: each earthquake has a small initial precursory arrival followed by a large pulse of moment release with a distinct onset. The delay time varies from 4 s for the Playa Azul event to 8 s for the Colima event. While there is some evidence of spatial concentration of moment release for each event, our overall asperity distribution for the northern Mexico segment consists of one clear asperity, in the epicentral region of the 1973 Colima earthquake, and then a scattering of diffuse and overlapping regions of high moment release for the remainder of the segment. This character is directly displayed in the overlapping of rupture zones between the 1979 Petatlan event and the 1985 Michoacan aftershock. This character of the asperity distribution is in contrast to the widely spaced distinct asperities in the northern Japan-Kuriles Islands subduction zone, but is somewhat similar to the asperity distributions found in the central Peru and Santa Cruz Islands subduction zones. Subduction of the Orozco fracture zone may strongly affect the seismogenic character as the overlapping rupture zones are located on the crest of the subducted fracture zone. There is also a distinct change in the physiography of the upper plate that coincides with the subducting fracture zone, and the Guerrero seismic gap to the south of the Petatlan earthquake is in the wake of the Orozco fracture zone. At the northern end, the Rivera fracture zone in the subducting plate and the Colima graben in the upper plate coincide with the northernmost extent of the Colima rupture zone.     

About the specification of erosion flux for soft stratified cohesive sediments

The present paper deals with the specification of bed erosion flux that accounts for the effects of sediment-induced stratification in the water column. Owing to difficulties in measuring the bed shear stress _b and the erosive shear strength _s, we suggest a series of methods that combine laboratory and numerical experiments. A simplified turbulent transport model that includes these effects helps to quantify _b and _s. Focusing on soft stratified beds, the present study considers erosion rate formulas of the form =_f exp {[T_b-T_s]} where is a model constant (=1 for Gularte's (1978) formula and =1/2 for Parchure's (1984) formula). First, the bed erosive strength profile _s(Z) is adjusted by forcing the turbulent transport model with measured erosion rates. Second, three procedures are suggested to determine the erosion rate formula coefficients _f and : a global procedure and two different layer-by-layer procedures. Each procedure is applied to an erosion experiment conducted in a rotating annular flume by Villaret and Paulic (1986). The use of the layer-by-layer procedure based on a least squares fitting technique provides a closer fit than the global procedure. The present study points out the complementarity of experimental and numerical approaches and also suggests possible improvements in laboratory test procedures.