山东地区多台波速比研究

文中从多台计算波速比方法的原理入手,对不同公式计算的波速比差异进行了深入分析,认为在原理一致的条件下,波速比差异主要与拟合过程中自变量的选取及2组数据的相关系数有关。利用2002年1月至2005年7月山东省境内及江苏省北部共52个数字及模拟台站的地方震P波和S波到时资料,选取有4个以上记录台站的地震。整个研究区域的平均波速比为1.716,反映了这个地区的波速比相对于华北其他地区偏高。将研究区域划分为1°×2°的单元,并剔除距离震中过远的台站,以保证区域特征能得到反映。通过对比不同单元的平均波速比发现,34°~37°,115°~119°的平均波速比明显高于其他单元,而它们正好分布在郯庐断裂的两侧,应该与该地区上地壳的岩石性质及震源深度分布范围较宽导致的平均效应有关     

The strain‐dependent spatial evolution of garnet in a high‐P ductile shear zone from the Western Gneiss Region (Norway): a synchrotron X‐ray microtomography study

Reaction and deformation microfabrics provide key information to understand the thermodynamic and kinetic controls of tectono‐metamorphic processes, however, they are usually analysed in two dimensions, omitting important information regarding the third spatial dimension. We applied synchrotron‐based X‐ray microtomography to document the evolution of a pristine olivine gabbro into a deformed omphacite–garnet eclogite in four dimensions, where the 4^th dimension is represented by the degree of strain. In the investigated samples, which cover a strain gradient into a shear zone from the Western Gneiss Region (Norway), we focused on the spatial transformation of garnet coronas into elongated garnet clusters with increasing strain. The microtomographic data allowed quantification of garnet volume, shape and spatial arrangement evolution with increasing strain. The microtomographic observations were combined with light microscope and backscatter electron images as well as electron microprobe (EMPA) and electron backscatter diffraction (EBSD) analysis to correlate mineral composition and orientation data with the X‐ray absorption signal of the same mineral grains. With increasing deformation, the garnet volume almost triples. In the low‐strain domain, garnet grains form a well interconnected large garnet aggregate that develops throughout the entire sample. We also observed that garnet coronas in the gabbros never completely encapsulate olivine grains. In the most highly deformed eclogites, the oblate shapes of garnet clusters reflect a deformational origin of the microfabrics. We interpret the aligned garnet aggregates to direct synkinematic fluid flow, and consequently influence the transport of dissolved chemical components. EBSD analyses reveal that garnet shows a near‐random crystal preferred orientation that testifies no evidence for crystal plasticity. There is, however evidence for minor fracturing, neo‐nucleation and overgrowth. Microprobe chemical analysis revealed that garnet compositions progressively equilibrate to eclogite facies, becoming more almandine‐rich. We interpret these observations as pointing to a mechanical disintegration of the garnet coronas during strain localization, and their rearrangement into individual garnet clusters through a combination of garnet coalescence and overgrowth while the rock was deforming.     

Genetic and ore-forming ages of the Fe–P–(Ti) oxide deposits associated with mafic–ultramafic–carbonatite complexes in the Kuluketage block,NW China

Abstract

During the past 50 years, many geological and ore-deposit investigations have led to the discovery of the Fe–P–(Ti)-oxide deposits associated with mafic–ultramafic–carbonatite complexes in the Kuluketage block, northeastern Tarim Craton. In this paper, we discuss the genetic and ore-forming ages, tectonic setting, and the genesis of these deposits (Kawuliuke, Qieganbulake and Duosike). LA-ICP-MS zircon U–Pb dating yielded a weighted mean ²⁰⁶Pb/²³⁸U ages of 811?±?5?Ma, 811?±?4?Ma, and 840?±?5?Ma for Kawuliuke ore-bearing pyroxenite, Qieganbulake gabbro and Duosike ore-bearing pyroxenite, respectively. The CL images of the Kawuliuke apatite grains show core–rim structure, suggesting multi-phase crystallisation, whereas the apatite grains from Qieganbulake and Dusike deposits do not show any core–rim texture, suggesting a single-stage crystallisation. LA-ICP-MS apatite ²⁰⁷Pb-corrected U–Pb dating provided weighted mean ²⁰⁶Pb/²³⁸U ages of 814?±?21?Ma and 771?±?8?Ma for the Kawuliuke ores, and 810?±?7?Ma and 841?±?7?Ma for Qieganbulake and Duosike ores, respectively. The core–rim texture in apatite by CL imaging as well as two different ore-forming ages in the core and rim of the apatite indicate two metallogenic events for the Kawuliuke deposit. The first metallogenic period was magmatic in origin, and the second period was hydrothermal in origin. The initial ore-forming age of the Kawuliuke Fe–P–Ti mineralisation was ca 814?Ma and the second one was ca 771?Ma. On the other hand, the ore-forming ages of the Qieganbulake and Duosike deposits were ca 810?Ma and ca 841?Ma, respectively. Qieganbulake and Duosike deposits were of magmatic origin. Combined with previous geochronological data and the research on the tectonic background, we infer that the Kawuliuke, Qieganbulake and Duosike Fe–P–(Ti)-oxide deposits were formed in a subduction-related tectonic setting and were the product of subduction-related magmatism.     

The cordierite‐bearing anatectic rocks of the higher Himalayan crystallines (eastern Nepal): low‐pressure anatexis,melt productivity,melt loss and the preservation of cordierite

Cordierite‐bearing anatectic rocks inform our understanding of low‐pressure anatectic processes in the continental crust. This article focuses on cordierite‐bearing lithologies occurring at the upper structural levels of the Higher Himalayan Crystallines (eastern Nepal Himalaya). Three cordierite‐bearing gneisses from different geological transects (from Mt Everest to Kangchenjunga) have been studied, in which cordierite is spectacularly well preserved. The three samples differ in terms of bulk composition likely reflecting different sedimentary protoliths, although they all consist of quartz, alkali feldspar, plagioclase, biotite, cordierite and sillimanite in different modal percentages. Analysis of the microstructures related to melt production and/or melt consumption allows the distinction to be made between peritectic and cotectic cordierite. The melt productivity of different prograde assemblages (from two‐mica metapelite/metagreywacke to biotite‐metapelite) has been investigated at low‐pressure conditions, evaluating the effects of muscovite v. biotite dehydration melting on both mineral assemblages and microstructures. The results of the thermodynamic modelling suggest that the mode and type of the micaceous minerals in the prograde assemblage is a very important parameter controlling the melt productivity at low‐pressure conditions, the two‐mica protoliths being significantly more fertile at any given temperature than biotite gneisses over the same temperature interval. Furthermore, the cordierite preservation is promoted by melt crystallization at a dry solidus and by exhumation along P‐T paths with a peculiar dP/dT slope of about 15–18 bar °C^?1. Overall, our results provide a key for the interpretation of cordierite petrogenesis in migmatites from any low‐P regional anatectic terrane. The cordierite‐bearing migmatites may well represent the source rocks for the Miocene andalusite‐bearing leucogranites occurring at the upper structural levels of the Himalayan belt, and low‐P isobaric heating rather than decompression melting may be the triggering process of this peculiar peraluminous magmatism.     

两个古铜辉石样品的G.P区研究

在两个斜方辉石样品中观察到G.P.区亚稳相。内蒙古暗色辉长岩古铜辉石成分是En_(77)Fs_(18·6)Wo_(4·4),其高分辨象显示了密集的单层G.P.区;玄武岩中变辉长岩包体古铜辉石成分是En_(72·2)Fs_(25·7)Wo_(2·1),具双层G.P.区。该包体与具多层G.P.区的月岩橄长岩相似,后期冷却极快。在地体火成岩体结晶和冷却过程中易出现单层G.P.区,而岩体的大小,冷却的快慢可能影响G.P.区的密度。对N-14样品不同放大倍数的高分辨象G.P.区线密度和面密度的统计值同样具代表性。文中设想了G.P.区出溶的假二元系相图。     

新疆前兆震群ρ值的研究

研究新疆伊宁——乌鲁木齐和乌什——库尔勒1972年以来发生的49个震群的ρ值表明,ρ<0.55可作为前兆震群的判据指标。分析了ρ<0.55标准下的前兆震群的预测能力,认为,震群序列的ρ值具有一定的预报效能。     

关于地震台站极性校正的问题

国内外的台网中总是一些台站，其极性读取似乎是由大量台站Ｐ波初动的整体分布确定的震源机制相矛盾，这些矛盾通常被作为坏读（ｂａｄ ｒｅａｄｉｎｇ）处理，造成台站的极性问题的复杂原因究竟是什么，利用ＮＥＩＣ的核爆资料，文中给出两种可能推测：台站仪器本身的不可和地震本身的复杂性。     

A crustal seismic velocity model for the UK, Ireland and surrounding seas

A regional model of the 3-D variation in seismic P -wave velocity structure in the crust of NW Europe has been compiled from wide-angle reflection/refraction profiles. Along each 2-D profile a velocity–depth function has been digitised at 5 km intervals. These 1-D velocity functions were mapped into three dimensions using ordinary kriging with weights determined to minimise the difference between digitised and interpolated values. An analysis of variograms of the digitised data suggested a radial isotropic weighting scheme was most appropriate. Horizontal dimensions of the model cells are optimised at 40 × 40 km and the vertical dimension at 1 km. The resulting model provides a higher resolution image of the 3-D variation in seismic velocity structure of the UK, Ireland and surrounding areas than existing models. The construction of the model through kriging allows the uncertainty in the velocity structure to be assessed. This uncertainty indicates the high density of data required to confidently interpolate the crustal velocity structure, and shows that for this region the velocity is poorly constrained for large areas away from the input data.