Gravity inferred subsurface structure of Gadwal schist belt, Andhra Pradesh

Detailed gravity data collected across the Gadwal schist belt in the state of Andhra Pradesh show an 8.4 mgal residual gravity anomaly associated with meta-sediments/volcanics of the linear NNW-SSE trending schist belt that shows metamorphism from green schist to amphibolite facies. This schist belt is flanked on either side by the peninsular gneissic complex. The elevation and slab Bouguer corrected residual gravity profile data were interpreted using 2-D prism models. The results indicate a synformal structure having a width of 1.8 km at the surface, tapering at a depth of about 2.6 km with a positive density contrast of 0.15 gm/cc with respect to the surrounding peninsular gneissic complex.     

Measurement and correlation of microstructures: the case of foliation intersection axes

Recent studies have used the relative rotation axis of sigmoidal and spiral‐shaped inclusion trails, known as Foliation Inflexion/Intersection Axis (FIA), to investigate geological processes such as fold mechanisms and porphyroblast growth. The geological usefulness of this method depends upon the accurate measurement of FIA orientations and correct correlation of temporally related FIAs. This paper uses new data from the Canton Schist to assess the variation in FIA orientations within and between samples, and evaluates criteria for correlating FIAs. For the first time, an entire data set of FIA measurements is published, and data are presented in a way that reflects the variation in FIA orientations within individual samples and provides an indication of the reliability of the data. Analysis of 61 FIA trends determined from the Canton Schist indicate a minimum intrasample range in FIA orientations of 30°. Three competing models are presented for correlation of these FIAs, and each of the models employ different correlation criteria. Correlation of FIAs in Model 1 is based on relative timing and textural criteria, while Model 2 uses relative timing, orientation and patterns of changing FIA orientations, and Model 3 uses relative timing and FIA orientation as correlation criteria. Importantly, the three models differ in the spread of FIA orientations within individual sets, and the number of sets distinguished in the data. Relative timing is the most reliable criterion for correlation, followed by textural criteria and patterns of changing FIA orientations from core to rim of porphyroblasts. It is proposed that within a set of temporally related FIAs, the typical spread of orientations involves clustering of data in a 60° range, but outliers occur at other orientations including near‐normal to the peak distribution. Consequently, in populations of FIA data that contain a wide range of orientations, correlation on the basis of orientation is unreliable in the absence of additional criteria. The results of this study suggest that FIAs are best used as semiquantitative indicators of bulk trends rather than an exact measurement for the purpose of quantitative analyses.     

The initiation and development of metamorphic foliation in the Otago Schist, Part 1: competitive oriented growth of white mica

The 3D shape, size and orientation data for white mica grains sampled along two transects of increasing metamorphic grade in the Otago Schist, New Zealand, reveal that metamorphic foliation, as defined by mica shape‐preferred orientation (SPO), developed rapidly at sub‐greenschist facies conditions early in the deformation history. The onset of penetrative strain metamorphism is marked by the rapid elimination of poorly oriented large clastic mica in favour of numerous new smaller grains of contrasting composition, higher aspect ratios and a strong preferred orientation. The metamorphic mica is blade shaped with long axes defining the linear aspect of the foliation and intermediate axes a partial girdle about the lineation. Once initiated, foliation progressively intensified by an increase in the aspect ratio, size and alignment of grains, although highest grade samples within the chlorite zone record a decrease in aspect ratio and reduction in SPO strength despite continued increase in grain size. These trends are interpreted in terms of progressive competitive anisotropic growth of blade‐shaped grains so that the fastest growth directions and blade lengths tend to parallel the extension direction during deformation. The competitive nature of mica growth is indicated by the progressive increase in size and resultant decrease in number of metamorphic mica with increasing grade, from c. 1000 relatively small mica grains per square millimetre of thin section at lower grades, to c. 100 relatively large grains per square millimetre in higher grade samples. Reversal of SPO intensity and grain aspect ratio trends in higher grade samples may reflect a reduction in the strain rate or reduction in the deviatoric component of the stress field.     

Mantle peridotite in newly discovered far-inland subduction complex,southwest Arizona: initial report

The latest Cretaceous to early Palaeogene Orocopia Schist and related units are generally considered a low-angle subduction complex that underlies much of southern California and Arizona. A recently discovered exposure of Orocopia Schist at Cemetery Ridge west of Phoenix, Arizona, lies exceptionally far inland from the continental margin. Unexpectedly, this body of Orocopia Schist contains numerous blocks, as large as ~300 m, of variably serpentinized mantle peridotite. These are unique; elsewhere in the Orocopia and related schists, peridotite is rare and completely serpentinized. Peridotite and metaperidotite at Cemetery Ridge are of three principal types: (1) serpentinite and tremolite serpentinite, derived from dunite; (2) partially serpentinized harzburgite and olivine orthopyroxenite (collectively, harzburgite); and (3) granoblastic or schistose metasomatic rocks, derived from serpentinite, made largely of actinolite, calcic plagioclase, hercynite, and chlorite. In the serpentinite, paucity of relict olivine, relatively abundant magnetite (5%), and elevated Fe³⁺/Fe indicate advanced serpentinization. Harzburgite contains abundant orthopyroxene, only slightly serpentinized, and minor to moderate (1–15%) relict olivine. Mantle tectonite fabric is locally preserved. Several petrographic and geochemical characteristics of the peridotite at Cemetery Ridge are ambiguously similar to either abyssal or mantle-wedge (suprasubduction) peridotites and serpentinites. Least ambiguous are orthopyroxene compositions. Orthopyroxene is distinctively depleted in Al₂O₃, Cr₂O₃, and CaO, indicating mantle-wedge affinities. Initial interpretation of field and petrologic data suggests that the peridotite blocks in the Orocopia Schist subduction complex at Cemetery Ridge may be derived from the leading corner or edge of a mantle wedge, presumably in (pre-San Andreas fault) southwest California. However, derivation from a subducting plate is not precluded.     

A garnet–hornblende geothermometer: calibration, testing, and application to the Pelona Schist, Southern California

Abstract A garnet–hornblende Fe–Mg exchange geothermometer has been calibrated against the garnet–clinopyroxene geothermometer of Ellis & Green (1979) using data on coexisting garnet + hornblende + clinopyroxene in amphibolite and granulite facies metamorphic assemblages. Data for the Fe–Mg exchange reaction between garnet and hornblende have been fitted to the equation. In K_D=Δ (X_Ca,g) where K_D is the Fe–Mg distribution coefficient, using a robust regression approach, giving a thermometer of the form: with very satisfactory agreement between garnet–hornblende and garnet–clinopyroxene temperatures. The thermometer is applicable below about 850°C to rocks with Mn-poor garnet and common hornblende of widely varying chemistry metamorphosed at low a_O2. Application of the garnet–hornblende geothermometer to Dalradian garnet amphibolites gives temperatures in good agreement with those predicted by pelite petrogenetic grids, ranging from 520°C for the lower garnet zone to 565–610°C for the staurolite to kyanite zones. These results suggest that systematic errors introduced by closure temperature problems in the application of the garnet–clinopyroxene geothermometer to the ‘calibration’data set are not serious. Application to ‘eclogitic’garnet amphibolites suggests that garnet and hornblende seldom attain Fe–Mg exchange equilibrium in these rocks. Quartzo-feldspathic and mafic schists of the Pelona Schist on Sierra Pelona, Southern California, were metamorphosed under high pressure greenschist, epidote–amphibolite and (oligoclase) amphibolite facies beneath the Vincent Thrust at pressures deduced to be 10±1 kbar using the phengite geobarometer, and 8–9kbar using the jadeite content of clinopyroxene in equilibrium with oligoclase and quartz. Application of the garnet–hornblende thermometer gives temperatures ranging from about 480°C at the garnet isograd through 570°C at the oligoclase isograd to a maximum of 620–650°C near the thrust. Inverted thermal gradients beneath the Vincent Thrust were in the range 170 to 250°C per km close to the thrust.     

Frost action and hydration as rock weathering mechanisms on schist: A laboratory study

Recently it has been proposed that stress generated by the adsorption of water to clay surfaces in argillaceous rocks may be an important agent of mechanical weathering in polar and alpine environments, implying that long-held views on the status of frost action in these areas may be in need of revision. This study documents the response, under controlled experimental conditions, of aggregates of fresh and partlyweathered schist and fresh pre-cut schist blocks to 500 accelerated (12 hour) freeze-thaw and hydration-dehydration cycles. Aggregate samples subjected to freezing cycles produced the largest amounts of material in the less than 2 mm size range (an average of 8 per cent and 16 per cent for the fresh and partly-weathered aggregates respectively), whereas humidity cycles above and below freezing yielded lesser amounts (3 per cent and 4 per cent respectively). The fresh schist blocks were found to be highly resistant to both mechanisms; only those experiencing freeze-thaw oscillations produced measurable amounts of detritus. Although hydration effects were not as effective as frost action in causing particle size reduction in aggregates, the two mechanisms may well reinforce one another in periglacial environments, enhancing the ability of these areas to serve as source regions for loess.     

Zoned (Cretaceous and Cenozoic) garnet and the timing of high grade metamorphism, Southern Alps, New Zealand

New (garnet Sm–Nd and Lu–Hf) and existing (Rb–Sr, ⁴⁰Ar/³⁹Ar, U–Pb and Sm–Nd) ages and data on deformational fabrics and mineral compositions show for the first time that the garnet growth and ductile deformation in the Alpine Schist belt and Southern Alps orogen, New Zealand are diachronous and partly Cenozoic in age. The dominant metamorphic isograds in the Alpine Schist formed during crustal thickening at a previously unsuspected time, at c. 86 Ma, immediately prior to the opening of the Tasman Sea at c. 84–82 Ma. Obvious changes in the textures and compositional zoning patterns of garnet are not always reliable indicators of polymetamorphism, and fabric elements can be highly diachronous. A detailed timing history for the growth of a single garnet is recorded by a Sm–Nd garnet–whole rock age of 97.8 ± 8.1 Ma for the inmost garnet core (zone 1), Lu–Hf ages of 86.2 ± 0.2 Ma and 86.3 ± 0.2 Ma for overgrowth zones 2 and 3, a step‐leach Sm–Nd age of 12 ± 37 Ma for zone 4, and growth of the garnet rim (zone 5) over the Alpine Fault mylonite foliation during the modern phase of oblique collision that began at c. 5–6 Ma. Plate convergence along the New Zealand portion of the Gondwana margin continued after c. 105 Ma, almost certainly culminating in the oblique collision of a large oceanic plateau (Hikurangi Plateau). The metamorphism of the Alpine Schist at c. 86 Ma is evidence of that hit. The mid‐ to late‐Cretaceous extension that is widespread elsewhere in the New Zealand region is attributed to upper plate extension and slab roll‐back. The effects of the collision with the Hikurangi Plateau may have contributed to the changing plate motions in the region leading up to the opening of the Tasman Sea at c. 82 Ma.     

An outline of the petrology, structure and age of the Pompangeo Schist Complex of central Sulawesi, Indonesia

Variably dismembered and metamorphosed accretionary complexes constitute the basement of much of the Indonesian island of Sulawesi. The most extensive of these is the Pompangeo Schist Complex, which crops out over ∼ 5000 km² in central Sulawesi, and is predominantly composed of interbanded phyllitic marble, calcareous phyllite, graphitic schist and quartzite; rocks of terrigenous to shallow marine origin. Along the eastern margin of the complex, schists are interthrust with unmetamorphosed Jurassic sandstone, which may represent parental material of the complex. The schists are unconformably overlain by pelagic sediments with an Albian–Cenomanian biostratigraphy. Synmetamorphic progressive deformation of the Pompangeo Schist Complex has resulted in repeated isoclinal folding and a strong transposition foliation striking north-northwest/south-southeast and dipping west, subparallel to the compositional banding of the complex; microstructural fabrics indicate a top-to-east sense of shear. On a regional scale the Pompangeo Schist Complex is lithostratigraphically coherent and an east-to-west metamorphic field gradient is recognizable, which, if continuous, represents a relatively low thermal gradient of ∼ 15 °C/km. K–Ar dating yielded ages of ca 111 Ma. Correlative metamorphic rocks appear to underlie the entire Neogene magmatic province, since they occur sporadically throughout western Sulawesi, including the Bantimala region of the South Arm. The Pompangeo schist metamorphism cannot be correlated with arc magmatism in western Sulawesi, which is of Neogene age. The Pompangeo and Bantimala schists, as well as other accretionary complexes in western Sulawesi, were probably generated in the same subduction system that was responsible for the extensive Mesozoic continental arc in central Kalimantan, at the eastern margin of Sundaland.     

Lack of porphyroblast rotation in the Otago schists, New Zealand: implications for crenulation cleavage development, folding and deformation partitioning

Porphyroblasts of garnet and plagioclase in the Otago schists have not rotated relative to geographic coordinates during non-coaxial deformation that post-dates their growth. Inclusion trails in most of the porphyroblasts are oriented near-vertical and near-horizontal, and the strike of near-vertical inclusion trails is consistent over 3000 km². Microstructural relationships indicate that the porphyroblasts grew in zones of progressive shortening strain, and that the sense of shear affecting the geometry of porphyroblast inclusion trails on the long limbs of folds is the same as the bulk sense of displacement of fold closures. This is contrary to the sense of shear inferred when porphyroblasts are interpreted as having rotated during folding.
Several crenulation cleavage/fold models have previously been developed to accommodate the apparent sense of rotation of porphyroblasts that grew during folding. In the light of accumulating evidence that porphyroblasts do not generally rotate, the applicability of these models to deformed rocks is questionable.
Whether or not porphyroblasts rotate depends on how deformation is partitioned. Lack of rotation requires that progressive shearing strain (rotational deformation) be partitioned around rigid heterogeneities, such as porphyroblasts, which occupy zones of progressive shortening or no strain (non-rotational deformation). Therefore, processes operating at the porphyroblast/matrix boundary are important considerations. Five qualitative models are presented that accommodate stress and strain energy at the boundary without rotating the porphyroblast: (a) a thin layer of fluid at the porphyroblast boundary; (2) grain-boundary sliding; (3) a locked porphyroblast/matrix boundary; (4) dissolution at the porphyroblast/matrix boundary, and (5) an ellipsoidal porphyroblast/shadow unit.     

Circulation in Tasman Bay

Direct current measurements at four locations in Tasman Bay and numerical model results are used to analyse the mean flow in Tasman Bay. The mean circulation conforms to that previously found from drift card experiments: a clockwise circulation in Golden Bay, and an anti‐clockwise flow in Tasman Bay, with a return south‐westerly flow on the coast near Nelson. Typical mean speeds are 0.02–0.05 m.s^‐1. The circular flow appears asymmetrical in both bays, with a stronger outflow along Farewell Spit in Golden Bay and near D'Urville Island in Tasman Bay.

An analytical tidal solution is used to exhibit the influence of Cook Strait in producing smaller tidal amplitudes in eastern Tasman Bay. Tidal speeds of 0.15–0.30 nus^‐1 are typical, with tidal ellipses having degenerated into north‐east, south‐west lines.