The Unique Binary Star α Coronae Borealis

We present a new photoelectric light curve of α Coronae Borealis. The derived rate of apsidal motion differs from the theoretical prediction. A possible solution of the problem is suggested.     

超高层建筑第三方测量关键技术研究

以广州市利通广场第三方测量为研究对象,运用超高层建筑精密工程测量知识,综合采用GPS、测量机器人、激光垂准仪等多种先进设备,制定严密的超高层建筑控制网竖向传递复测方案,确立方便可行的轴线检测、高程检测及核心筒垂直度测量方法,为超高层建筑第三方测量提供新思路,对类似工程具有借鉴作用。     

Imaging Borrelly

The nucleus, coma, and dust jets of short-period Comet 19P/Borrelly were imaged from the Deep Space 1 spacecraft during its close flyby in September 2001. A prominent jet dominated the near-nucleus coma and emanated roughly normal to the long axis of nucleus from a broad central cavity. We show it to have remained fixed in position for more than 34 hr, much longer than the 26-hr rotation period. This confirms earlier suggestions that it is co-aligned with the rotation axis. From a combination of fitting the nucleus light curve from approach images and the nucleus' orientation from stereo images at encounter, we conclude that the sense of rotation is right-handed around the main jet vector. The inferred rotation pole is approximately perpendicular to the long axis of the nucleus, consistent with a simple rotational state. Lacking an existing IAU comet-specific convention but applying a convention provisionally adopted for asteroids, we label this the north pole. This places the sub-solar latitude at ∼60° N at the time of the perihelion with the north pole in constant sunlight and thus receiving maximum average insolation.     

Research on regional comprehensive development in developed regions —The case of Shanghai-Nanjing-Hangzhou area

The developed regions are faced with the problems of regional comprehensive development, and the research on regional comprehensive development has become a trend in the world. To optimize regional industrial structure and to select and determine scientifically the spatial development strategy of regional industries are the central themes to be solved for the research on regional comprehensive development in the developed regions. This paper proposed the basis for optimizing regional industrial structure, and the main factors of selecting and determining the regional leading industries. Based on this, the paper puts forward the leading industries and the spatial development strategy in Shanghai-Nanjing-Hangzhou area in the future ten or more years. Combined with the situation of Shanghai-Nanjing-Hangzhou area, the paper also discusses some problems of locating superior developing axis to benefit the rational distribution of regional productive forces.     

A method to solve the paleotectonic analysis problem

The method to determine the rates of tectonic movements is based on the use of dynamic models of sedimentary basins. A standard dataset should be provided as input information: the present-day position of sedimentary layer interfaces (chronostratigraphic boundaries), land surface and basement, the layer ages, and the uncertainty limits within which the depth of sedimentation of each layer may have differed. In terms of dynamic models, the paleotectonic analysis problem is reduced to the determination of such tectonic rates that, at prescribed reference times, the model surface topography within the assumed limits would be constrained. At the final moment, the interfaces would be brought into agreement with the contemporary geologic cross-section. The analysis the problem of tectonic rates determination has shown that it has no unique solution. One of the ways to obtain the unique solution is to seek it within a prescribed class of functions, for example, the Fourier series. This method differs from the paleotectonic analysis methodology in that it treats the tectonic rates of motion as functions of time and spatial variables. Under certain conditions, it proves feasible to reconstruct the rates of tectonic movements not only within the time intervals represented in the deposited strata, but within periods of erosion as well. It also is possible to take into account the deformation-induced changes in thickness of the layers. The method's application is illustrated with an example of the Terek-Caspian Trough. As follows from the computation, the tectonic movements since the Middle Jurassic may be presented as a sum of two components: an overall slowing-down subsidence whose rate is proportional to the square root of the age, and local movements which follow a regular oscillatory time pattern with a period of 60–70 MY. The character of the local movements is such that the profile appears to break into a northern and southern segment. When one was being uplifted, the other segment was sinking, andvice versa. These two segments are separated by a deep-seated fault. This may have been a result of an external compression on the trough.     

Geometry and growth of sill complexes: insights using 3D seismic from the North Rockall Trough

Doleritic sill complexes, which are an important component of volcanic continental margins, can be imaged using 3D seismic reflection data. This allows unprecedented access to the complete 3D geometry of the bodies and an opportunity to test classic sill emplacement models. The doleritic sills associated with basaltic volcanism in the North Rockall Trough occur in two forms. Radially symmetrical sill complexes consist of a saucer-like inner sill at the base with an arcuate inclined sheet connecting it to a gently inclined, commonly ragged, outer rim. Bilaterally symmetrical sill complexes are sourced by magma diverted from a magma conduit feeding an overlying volcano. With an elongate, concave upwards, trough-like geometry bilaterally symmetrical sills climb away from the magma source from which they originate. Both sill complex types can appear as isolated bodies but commonly occur in close proximity and consequently merge, producing hybrid sill complexes. Radial sill complexes consist of a series of radiating primary flow units. With dimensions up to 3 km, each primary flow unit rises from the inner saucer and is fed by primary magma tube. Primary flow units contain secondary flow units with dimensions up to 2 km, each being fed by a secondary magma tube branching from the primary magma tube. Secondary flow units in turn are composed of 100-m scale tertiary flow units. A similar branching hierarchy of flow units can also be seen in bilaterally symmetrical sill complexes, with their internal architecture resembling an enlarged version of a primary flow unit from a radial sill complex. This branching flow pattern, as well as the interaction between flow units of varying orders, provides new insights into the origin of the structures commonly seen within sill complexes and the hybrid sill bodies produced by their merger. The data demonstrate that each radially symmetrical sill complex is independently fed from a source located beneath the centre of the inner saucer, grows by climbing from the centre outwards and that peripheral dyking from the upper surface is a common feature. These features suggest a laccolith emplacement style involving peripheral fracturing and dyking during inner saucer growth and thickening. The branching hierarchy of flow units within bilaterally symmetrical sill complexes is broadly similar to that of primary flow units within a radially symmetrical sill complex, suggesting that the general features of the laccolith emplacement model also apply.Editorial responsibility: J. Stix     

Principal faults in the Shatsky Rise and their influence upon the evolution of the geological structure in the East Black Sea Region

A fault was traced along the southwestern margin of the Shatsky Rise. It extends to land where it crosses the Mountainous Crimea. Interpretation and analysis of marine seismic and magnetic survey data, as well as geological data on land, allow stating that the fault originated during the rift evolution stage of the East Black Sea Basin. Currently, the fault is in the sea and is a channel for migrating hydrocarbon fluids. Another fault was traced from the West Caucasus into the sea, where it separates the Shatsky Rise into two structural units.     

700年以来冲绳海槽西南部粘土矿物来源及其对沉积环境的响应

利用X射线衍射（XRD）技术对冲绳海槽南部HOBAB4-S2站700年以来的黏土矿物组成以及结晶学特征进行了研究和分析,并对该区的沉积特征、物质来源以及黏土矿物所记录的东亚季风的演化历史进行了探讨。研究发现冲绳海槽南部HOBAB4-S2站黏土矿物组合总体是以伊利石（59–77 %,平均含量69 %）和绿泥石（11–17 %,平均含量14 %）为主,而蒙脱石（5–23 %,平均含量12 %）和高岭石含量（2–6 %,平均含量4 %）则相对较低。通过黏土矿物研究对物源进行分析,发现冲绳海槽南部研究站位的黏土矿物中,蒙脱石主要是来自于长江或者东海大陆架的再沉积。伊利石,绿泥石以及高岭石主要来自于台湾河流,尤其是兰阳溪。蒙脱石/（伊利石+绿泥石）比值的大小可以用来指示东亚夏季风的强弱变化。1320 AD以来的黏土矿物组合的变化较好地记录了部分中世纪暖期后期、小冰期以及现代暖期3个时期在百年时间尺度上的气候波动。该指标显示,相对于中世纪暖期后期,东亚季风强度在小冰期（1405–1850 AD）和在现代暖期（1955 AD）均存在明显的减弱,指示该时期台湾东北部-冲绳海槽南部地区处于相对湿润强降雨的气候环境。     

论冲绳海槽在东海大陆架划界中的意义——以自然地理特征为视角

东海大陆架与中国东部大陆是一个完整的地理单元,东海大陆架是中国大陆在水下的延伸,连续延伸至冲绳海槽。冲绳海槽位于亚欧板块与菲律宾板块的交界处,地质运动活跃,已经逐渐脱离大陆的性质具备洋壳或准洋壳的性质,成为中日大陆架的天然分界线。在东海大陆架划界问题上日本主张"等距离中间线原则",但是"等距离中间线原则"不具有普遍适用性,也不能达到公平的结果。而应当适用"公平原则",考虑多种因素。"自然延伸原则"是大陆架制度的权利依据,而且我国是大陆架自然延伸超过200海里的国家,所以应将大陆架的自然延伸作为中日东海大陆架划界的主要考虑因素。     

冲绳海槽海底地形的补偿模式研究Ⅱ.冲绳海槽均衡响应函数的地质解释

本文从区域补偿模式和实验均衡理论出发,利用重力和地形资料计算了冲绳海槽的均衡响应函数.结果表明,冲绳海槽南段弹性板有效厚度和补偿深度明显大于中段.结合其他地质地球物理资料解释认为,产生这种差异的原因主要是南、中两段岩石圈温度和补偿机制的不同所致.