冀东地区油气微渗漏地植物的遥感基础研究

本文通过已知含油区及背景区地植物及地表土壤多种微量金属元素和吸附烃的综合分析,并利用遥感资料与物探资料作复合评价,讨论了冀东油气微渗漏地区的遥感植物地球化学标志。     

Evaluation of the method of collecting suspended sediment from large rivers by discharge-weighted pumping and separation by continuous-flow centrifugation

A method for collecting suspended sediment samples has been developed that pumps a discharge-weighted volume of water from fixed depths at four to 40 locations across a river and separates the suspended sediment in the sample using a continuous-flow centrifuge. The efficacy of the method is evaluated by comparing the particle size distributions of sediment collected by the discharge-weighted pumping method with the particle size distributions of sediment collected by depth integration and separated by gravitational settling. The pumping method was found to undersample the suspended sand sized particles (> 63 μm) but to collect a representative sample of the suspended silt and clay sized particles (< 63 μm). The centrifuge separated the silt and clay sized particles (< 63 μm) into three fractions. Based on the average results of processing 17 samples from the Mississippi River and several of its large tributaries in 1990, about 10% of the silt and clay sized material was trapped in a centrifuge bowl-bottom sealing unit containing the nozzle and consisted of mostly medium and coarse silt from 16 to 63 μm. About 74% was retained on a Teflon liner in the centrifuge bowl and consisted of sizes from 0–1 to 63 μm. About 9% was discharged from the centrifuge in the effluent and was finer than 0–1 μm. About 7% was lost during the processes of removing the wet sediment fractions from the centrifuge, drying and weighing. The success of the discharge-weighted pumping method depends on how homogeneously the silt and clay sized particles (< 63 μm) are distributed in the vertical direction in the river. The degree of homogeneity depends on the composition and degree of aggregation of the suspended sediment particles.     

Meso-scale testing and development of test procedures to maintain mass balance

The Conrad Blucher Institute for Surveying and Science (Texas A&M University––Corpus Christi) has conducted numerous petroleum experiments at the Shoreline Environmental Research Facility (Corpus Christi, Texas, USA). The meso-scale facility has multiple wave tanks, permitting some control in experimental design of the investigations, but allowing for real-world conditions. This paper outlines the evolution of a materials balance approach in conducting petroleum experiments at the facility. The first attempt at a materials balance was during a 1998 study on the fate/effects of dispersant use on crude oil. Both water column and beach sediment samples were collected. For the materials balance, the defined environmental compartments for oil accumulation were sediments, water column, and the water surface, while the discharge from the tanks was presumed to be the primary sink. The “lessons learned” included a need to quantify oil adhesion to the tank surfaces. This was resolved by adhering strips of the polymer tank lining to the tank sides that could be later removed and extracted for oil. Also, a protocol was needed to quantify any floating oil on the water surface. A water surface (oil slick) quantification protocol was developed, involving the use of solid-phase extraction disks. This protocol was first tested during a shoreline cleaner experiment, and later refined in subsequent dispersant effectiveness studies. The effectiveness tests were designed to simulate shallow embayments which created the need for additional adjustments in the tanks. Since dispersant efficacy is largely affected by hydrodynamics, it was necessary to scale the hydrodynamic conditions of the tanks to those expected in our prototype system (Corpus Christi Bay, Texas). The use of a scaled model permits the experiment to be reproduced and/or evaluated under different conditions. To minimize wave reflection in the tank, a parabolic wave dissipater was built. In terms of materials balance, this design reduced available surface area as a sink for oil adsorption.     

Development of airborne oil thickness measurements

A laboratory sensor has now been developed to measure the absolute thickness of oil on water slicks. This prototype oil slick thickness measurement system is known as the laser-ultrasonic remote sensing of oil thickness (LURSOT) sensor. This laser opto-acoustic sensor is the initial step in the ultimate goal of providing an airborne sensor with the ability to remotely measure oil-on-water slick thickness. The LURSOT sensor employs three lasers to produce and measure the time-of-flight of ultrasonic waves in oil and hence provide a direct measurement of oil slick thickness. The successful application of this technology to the measurement of oil slick thickness will benefit the scientific community as a whole by providing information about the dynamics of oil slick spreading and the spill responder by providing a measurement of the effectiveness of spill countermeasures such as dispersant application and in situ burning.

This paper will provide a review of early developments and discuss the current state-of-the-art in the field of oil slick thickness measurement.     

The dose-response relationship between No. 2 fuel oil and the growth of the salt marsh grass,Spartina alterniflora

The effect of No. 2 fuel oil on the biomass production of the salt marsh plant, Spartina alterniflora, was studied in a greenhouse dose-response experiment. S. alterniflora were transplanted into soil with 10 dosage levels of No. 2 fuel oil ranging from 0 to 456 mg g(-1) dry soil. Three months after transplantation, values for plant biomass, stem density, and shoot height decreased significantly with increasing fuel oil level in a dose-response fashion. Evapo-transpiration rates were correlated with the total biomass response. Relative to the control, a significant decrease in total (above- plus below-ground) plant biomass was observed at concentrations above 57 mg g(-1) dry soil. Within the 3-month experimental period, detrimental effects on below-ground biomass accumulation and bioluminescence of the marine bacterium Viberio fisheri in the Microtox Solid Phase Test were observed at oil concentrations >29 mg g(-1) dry soil, suggesting that biological effects of oil within the sediment matrix may be more pronounced than on above-ground biomass, requiring a dosage 228 mg g(-1) dry soil to elicit a significant detrimental effect. Hence, measurements of oil effects with biological end-points based solely on above-ground responses may underestimate the potential impacts of petroleum hydrocarbon spills, especially when the oil has penetrated the soil. While S. alterniflora was proved to be relatively tolerant to the No. 2 fuel oil spills, its effectiveness in phytoremediation operations may be limited at fuel oil levels 228 mg g(-1) dry soil, as both plant growth and microbial activity may be constrained.     

Application of the luciferase cell culture bioassay for the detection of refined petroleum products

A luciferase cell culture-based bioassay, developed to detect 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD)-like activity of halo-genated and polycyclic aromatic hydrocarbons, was optimized to detect refined petroleum products and to determine their relative inducing potency. Quality control standards from 32 refined products (gasolines and diesels, jet fuels, lubricating oils, fuel oils and weathered products) and three commercial products were evaluated. Induction equivalents (I-EQs) were determined by direct comparison of the EC50 and EC20 values (based on the median and 20% TCDD maximal response, respectively) from dose-response curves for each product to those obtained with TCDD. Most petroleum products were active in the luciferase bioassay, with those products composed of fractions produced later in the distillation process (i.e. fuel oils) inducing higher levels. Additionally, weathering of products reduced their induction potency. Based on the high I-EQ estimates of many products, biological effects associated with exposure may have been previously underestimated using other diagnostic methods.     

Tar ball frequency data and analytical results from a long-term beach monitoring program

Following the spill of fuel oils from the New Carissa in February 1999, approximately 300 km of beaches on the Pacific coast of North America were surveyed. A long-term observation program focused on the documentation of stranded tar balls in the vicinity of the spill site. Systematic beach surveys which were conducted over the period March 1999 to April 2001 and semi-logarithmic scale, time-series plots proved the most useful format for identifying trends. Beach monitoring continued through to August 2001. by which time 212 tar balls had been analyzed by GC/MS for their chemical characteristics. The samples of tar balls collected between February 1999 and August 2001 were qualitatively compared with New Carissa source oils (NCSO) and 101 (48%) were not consistent with NSCO. The presence of tar balls that are not related to an incident can confound attempts to define cleanup or endpoint criteria and to assess possible injury to natural resources.     

Salt transport on islands in the Okavango Delta: Numerical investigations

This study uses a numerical model to investigate the groundwater flow and salt transport mechanisms below islands in the Okavango Delta. Continuous evapotranspiration on the islands results in accumulation of solutes and the formation of a saline boundary layer, which may eventually become unstable. A novel Lagrangian method is employed in this study and compared to other numerical methods. The numerical results support the geophysical observations of density fingering on Thata Island. However, the process is slow and it takes some hundreds of years until density fingering is triggered. The results are sensitive to changes of the hydraulic gradient and the evapotranspiration rate. Small changes may lead to different plume developments. Results further demonstrate that density effects may be entirely overridden by lateral flow on islands embedded in a sufficiently high regional hydraulic gradient.     

坪北油田延长组长6油组储层层内非均质性研究

在坪北油田应用岩心观察、岩心分析化验资料、测井解释成果、测试及开发动态等方面的资料分析长6储层的非均质性,重点解剖层内非均质性特点,总结了正韵律,反韵律,复合韵律和交互韵律4种类型的层内非均质性。夹层分布较广泛,加剧了层间非均质性。     

华池油田长33低渗油藏流动单元研究

流动单元的研究,其目的在于对油藏的非均质性有进一步的认识,为提高油藏描述的精度提供依据。本文根据流动单元的理论,选取适合该区实际的参数,应用聚类判别分析的方法,对华池油田陇东地区长33低渗储层进行分类研究,并且分析各类流动单元的特征及其控制因素,得出结论:该区储层可分为三类流动单元,各类流动单元的判别公式,不同的类型在动态、静态上有不同的表现;其分布的差异,宏观上受沉积微相的控制,微观上受成岩作用、岩石自身储集空间特征的限制。