海拉尔盆地贝西斜坡北部地区储层特征及影响因素分析

通过测井曲线的标准化处理及信息提取、岩心及录井岩屑观察、铸体薄片、物性分析、扫描电镜、压汞分析等技术手段,研究了海拉尔盆地贝西斜坡北部地区南屯组储层的主要岩性特征、物性特征、储集空间类型和影响因素.研究结果表明.海拉尔盆地南屯组以内陆湖相碎屑岩为主,主要包括角砾岩、砾岩、砂砾岩、粗砂岩、细砂岩、粉砂岩、泥质砂岩及泥岩等.南一段储层孔隙度平均值为6.15%,渗透率平均值为0.31 × 10-3μm2,为低孔特低渗型孔隙特征;南二段储层孔隙度平均值为12.18%,渗透率平均值为2.79× 10-3μm2,属于中孔低渗型孔隙特征.储集空间类型以粒间孔隙为主,发育一定的次生孔隙.喉道分为4种类型(Ⅰ类、Ⅱ类、Ⅲ类、Ⅳ类).扇三角洲前缘分支水道砂体、扇三角洲平原辫状河道砂体和滨浅湖砂坝微相砂体为该区有利的储层砂体类型.储层性质主要受沉积相和成岩作用影响.     

大鹏湾潮流数值计算

应用分步杂交方法建立了大鹏湾边界潮流数值模型，并对其进行了模拟计算，重现了该区域潮波及潮流的分布规律，并根据实测资料对其进行了验证，从而可系统地了解这一海区的潮波系统及潮流场等海洋要素的分布情况。     

Internal generation of waves: Delta source function method and source term addition method

In this study, we investigate two internal wave generation methods in numerical modeling of time-dependent equations for water wave propagation, i.e., delta source function method and source term addition method, the latter of which has been called the line source method in literatures. We derive delta source functions for the Boussinesq-type equations and extended mild-slope equations. By applying the fractional step splitting method, we show that the delta source function method is equivalent to the source term addition method employing the energy velocity. This suggests that the energy velocity should be used rather than the phase velocity for the transport of incident wave energy in the source term addition method. Finally, the performance of the delta source function method is verified by accurately generating nonlinear cnoidal waves as well as linear waves for horizontally one-dimensional cases.     

Generation of random waves in time-dependent extended mild-slope equations using a source function method

We develop techniques of numerical wave generation in the time-dependent extended mild-slope equations of Suh et al. [1997. Time-dependent equations for wave propagation on rapidly varying topography. Coastal Engineering 32, 91–117] and Lee et al. [2003. Extended mild-slope equation for random waves. Coastal Engineering 48, 277–287] for random waves using a source function method. Numerical results for both regular and irregular waves in one and two horizontal dimensions show that the wave heights and the frequency spectra are properly reproduced. The waves that pass through the wave generation region do not cause any numerical disturbances, showing usefulness of the source function method in avoiding re-reflection problems at the offshore boundary.     

渤海三维海洋温度和海流数值预报

"十·五"期间,我国开展了三维海洋温度和海流数值预报的业务化研究工作.经过3年的努力,渤海三维海洋温度和海流数值预报系统研制完成,并于2003年10月,开始试预报.本文对该预报系统以及运行情况进行了介绍,并分析了所存在的问题和发展方向.     

Numerical and experimental study on hydrodynamic interaction of side-by-side moored multiple vessels

This paper aims to investigate the basic interaction characteristics of side-by-side moored vessels both numerically and experimentally. A higher-order boundary element method (HOBEM) combined with generalized mode approach is applied to analysis of motion and drift force of side-by-side moored multiple vessels (LNG FPSO, LNGC and shuttle tankers). Model tests were carried out for the same floating bodies investigated in the numerical study in regular and irregular waves. Global and local motion responses and drift forces of three vessels are compared with those of calculations. Discussions is highlighted on applicability of numerical method to prediction of sophisticated multi-body interaction problem of which motion behavior is very important to analysis of mooring dynamics of deep sea floating bodies.     

Freely floating-body simulation by a 2D fully nonlinear numerical wave tank

Nonlinear interactions between large waves and freely floating bodies are investigated by a 2D fully nonlinear numerical wave tank (NWT). The fully nonlinear 2D NWT is developed based on the potential theory, MEL/material-node time-marching approach, and boundary element method (BEM). A robust and stable 4th-order Runge–Kutta fully updated time-integration scheme is used with regriding (every time step) and smoothing (every five steps). A special φ_n-η type numerical beach on the free surface is developed to minimize wave reflection from end-wall and wave maker. The acceleration-potential formulation and direct mode-decomposition method are used for calculating the time derivative of velocity potential. The indirect mode-decomposition method is also independently developed for cross-checking. The present fully nonlinear simulations for a 2D freely floating barge are compared with the corresponding linear results, Nojiri and Murayama’s (Trans. West-Jpn. Soc. Nav. Archit. 51 (1975)) experimental results, and Tanizawa and Minami’s (Abstract for the 6th Symposium on Nonlinear and Free-surface Flow, 1998) fully nonlinear simulation results. It is shown that the fully nonlinear results converge to the corresponding linear results as incident wave heights decrease. A noticeable discrepancy between linear and fully nonlinear simulations is observed near the resonance area, where the second and third harmonic sway forces are even bigger than the first harmonic component causing highly nonlinear features in sway time series. The surprisingly large second harmonic heave forces in short waves are also successfully reproduced. The fully updated time-marching scheme is found to be much more robust than the frozen-coefficient method in fully nonlinear simulations with floating bodies. To compare the role of free-surface and body-surface nonlinearities, the body-nonlinear-only case with linearized free-surface condition was separately developed and simulated.     

Functional responses for zooplankton feeding on multiple resources: a review of assumptions and biological dynamics

Modelers often need to quantify the rates at which zooplankton consume a variety of species, size classes and trophic types. Implicit in the equations used to describe the multiple resource functional response (i.e. how nutritional intake varies with resource densities) are assumptions that are not often stated, let alone tested. This is problematic because models are sensitive to the details of these formulations. Here, we enable modelers to make more informed decisions by providing them with a new framework for considering zooplankton feeding on multiple resources. We define a new classification of multiple resource responses that is based on preference, selection and switching, and we develop a set of mathematical diagnostics that elucidate model assumptions. We use these tools to evaluate the assumptions and biological dynamics inherent in published multiple resource responses. These models are shown to simulate different resource preferences, implied single resource responses, changes in intake with changing resource densities, nutritional benefits of generalism, and nutritional costs of selection. Certain formulations are further shown to exhibit anomalous dynamics such as negative switching and sub-optimal feeding. Such varied responses can have vastly different ecological consequences for both zooplankton and their resources; inappropriate choices may incorrectly quantify biologically-mediated fluxes and predict spurious dynamics. We discuss how our classes and diagnostics can help constrain parameters, interpret behaviors, and identify limitations to a formulation's applicability for both regional (e.g. High-Nitrate-Low-Chlorophyll regions comprising large areas of the Pacific) and large-scale applications (e.g. global biogeochemical or climate change models). Strategies for assessing uncertainty and for using the mathematics to guide future experimental investigations are also discussed.     

Numerical Simulation of Dynamic Response of Supple Nets

1 .Introduction Owing to the decline of capture fisheries andsaturation of traditional inshorefarms ,sea cage cul-ture as a newtype of aquaculture is developingrapidlyin China .However ,cage culture is a highriskoperation.The practice is vulnerable to natural hazards ,such as strong tides ,storms and typhoons .So,it is necessaryto assess the behavior of a sea cage exposedto waves and current before the designandinstallation of the structure . Computer simulation,due to its many advantages ,ha…