High Precision Sr‐Nd‐Hf‐Pb Isotopic Compositions of USGS Reference Material BCR‐2

The Lamont‐Doherty Earth Observatory radiogenic isotope group has been systematically measuring Sr‐Nd‐Pb‐Hf isotopes of USGS reference material BCR‐2 (Columbia River Basalt 2), as a chemical processing and instrumental quality control monitor for isotopic measurements. BCR‐2 is now a widely used geochemical inter‐laboratory reference material (RM), with its predecessor BCR‐1 no longer available. Recognising that precise and accurate data on RMs is important for ensuring analytical quality and for comparing data between different laboratories, we present a compilation of multiple digestions and analyses made on BCR‐2 during the first author's dissertation research. The best estimates of Sr, Nd and Hf isotope ratios and measurement reproducibilities, after filtering at the 2s level for outliers, were ⁸⁷Sr/⁸⁶Sr = 0.705000 ± 11 (2s, 16 ppm, n = 21, sixteen digestions, one outlier), ¹⁴³Nd/¹⁴⁴Nd = 0.512637 ± 13 (2s, 25 ppm, n = 27, thirteen digestions, one outlier) and ¹⁷⁶Hf/¹⁷⁷Hf = 0.282866 ± 11 (2s, 39 ppm, n = 25, thirteen digestions, no outliers). Mean Nd and Hf values were within error of those reported by Weis et al. (2006, 2007) in their studies of RMs; mean Sr values were just outside the 2s uncertainty range of both laboratories. Moreover, a survey of published Sr‐Nd‐Hf data shows that our results fall within the range of reported values, but with a smaller variability. Our Pb isotope results on acid leached BCR‐2 aliquots (n = 26, twelve digestions, two outliers) were ²⁰⁶Pb/²⁰⁴Pb = 18.8029 ± 10 (2s, 55 ppm), ²⁰⁷Pb/²⁰⁴Pb = 15.6239 ± 8 (2s, 52 ppm), ²⁰⁸Pb/²⁰⁴Pb = 38.8287 ± 25 (2s, 63 ppm). We confirm that unleached BCR‐2 powder is contaminated with Pb, and that sufficient leaching prior to digestion is required to achieve accurate values for the uncontaminated Pb isotopic compositions.     

An Investigation of Digestion Methods for Trace Elements in Bauxite and Their Determination in Ten Bauxite Reference Materials Using Inductively Coupled Plasma‐Mass Spectrometry

Trace elements from samples of bauxite deposits can provide useful information relevant to the exploration of the ore‐forming process. Sample digestion is a fundamental and critical stage in the process of geochemical analysis, which enables the acquisition of accurate trace element data by ICP‐MS. However, the conventional bomb digestion method with HF/HNO₃ results in a significant loss of rare earth elements (REEs) due to the formation of insoluble AlF₃ precipitates during the digestion of bauxite samples. In this study, the digestion capability of the following methods was investigated: (a) ‘Mg‐addition’ bomb digestion, (b) NH₄HF₂ open vessel digestion and (c) NH₄F open vessel digestion. ‘Mg‐addition’ bomb digestion can effectively suppress the formation of AlF₃ and simultaneously ensure the complete decomposition of resistant minerals in bauxite samples. The addition of MgO to the bauxite samples resulted in (Mg + Ca)/Al ratios ≥ 1. However, adding a large amount of MgO leads to significant blank contamination for some transition elements (V, Cr, Ni and Zn). The NH₄HF₂ or NH₄F open vessel digestion methods can also completely digest resistant minerals in bauxite samples in a short period of time (5 hr). Unlike conventional bomb digestion with HF/HNO₃, the white precipitates and the semi‐transparent gels present in the NH₄HF₂ and NH₄F digestion methods could be efficiently dissolved by evaporation with HClO₄. Based on these three optimised digestion methods, thirty‐seven trace elements including REEs in ten bauxite reference materials (RMs) were determined by ICP‐MS. The data obtained showed excellent inter‐method reproducibility (agreement within 5% for REEs). The relative standard deviation (% RSD) for most elements was < 6%. The concentrations of trace elements in the ten bauxite RMs showed agreement with the limited certified (Li, V, Cr, Cu, Zn, Ga, Sr, Zr and Pb) and information values (Co, Ba, Ce and Hf) available. New trace element data for the ten RMs are provided, some of which for the first time.     

Production and Certification of Synthetic Selenium Isotopic Reference Materials

Due to intensive research into selenium isotopes in recent years, the increasing requirement for reliable and comparable measurement results has created a strong demand for selenium isotopic certified reference materials (iCRM) that were previously not available. To address this, eleven selenium iCRMs were developed, including ten synthetic iCRMs (GBW 04447–GBW 04456) and one natural iCRM (GBW 04457). The synthetic iCRMs were prepared with ⁷⁶Se, ⁷⁸Se, ⁸⁰Se and ⁸²Se solutions and a natural selenium solution; the natural iCRM was prepared with highly pure selenium material. The property values of isotope ratios in these iCRMs were certified by calibrated mass spectrometry with a collision cell multi‐collector ICP‐MS. The mass discrimination effect of the instrument was corrected with corresponding ⁷⁸Se/⁷⁶Se isotope mixtures and ⁸²Se/⁷⁶Se isotope mixtures, which were gravimetrically prepared with purified, isotopically enriched selenium materials. Homogeneity and stability tests were performed, and no significant influences were found. The uncertainty of the property values of the iCRMs was evaluated according to the Guide to the Expression of Uncertainty in Measurement (GUM) of ISO/BIPM and ISO Guide 35. The δ^82/76Se value of GBW 04457 relative to NIST SRM 3149 was also calculated. These iCRMs are intended for use in calibration of instruments and evaluation of methods for the determination of selenium isotope ratios.     

渤海湾海岸带地区~(137)Cs参考剖面——意义、方法及初步结果

海岸带地区近百年来的现代地质过程重建必须以精确的年代学研究为基础,~(137)Cs时标法和~(210)Pb_(exc)测年法是目前广泛应用的方法。由于易受到河流沉积物供给变化、潮位状况、极端天气事件等的影响,海岸带现代过程的定量研究一直是高分辨率研究的瓶颈。区域性参考剖面可以提升现代沉积物测年方法在海岸带应用中的可靠性。因此,建立区域性的~(210)Pb_(exc)和~(137)Cs比活度-深度参考剖面,将改善对海岸带及邻近海区实测数据的解释。以渤海湾海岸带为研究区,选取沉积环境相对稳定、水平搬运作用较小的地区,采用人工探坑、Eijkelkamp槽型取样器获取了2个柱状岩心,通过γ能谱仪对样品进行~(210)Pb、~(226)Ra及~(137)Cs比活度测试,绘制剖面图,结合研究区已有数据,总结出6类海岸带常见的~(210)Pb_(exc)和~(137)Cs比活度-深度剖面类型,并重建了渤海湾海岸带~(137)Cs区域性参考剖面。结果显示,~(137)Cs在渤海湾地区的最大峰值指示1963年,可以作为区域性主要参考时标。但是,最大峰值上部的次峰在不同区域指示不同的时标,S4和S5两个站位该峰值指示的并非1986年时标。     

A New Reference Material for Tritium Organic Molecules in Sediment: Results of an International Intercomparison Exercise

Solid matrix ³H reference materials are challenging to prepare given the volatile nature of ³H and are often unrepresentative of the range of ³H forms that may be encountered during routine analysis. As a result, few ³H reference materials are currently available, undermining verification of analytical techniques for environmental ³H measurement. To address this, an International Working Group on Organically‐Bound Tritium Analysis determined to produce a tritium natural matrix reference material (NMRM). The reference material comprises marine sediment blended with sewage sludge contaminated with ³H‐organic species arising from authorised discharges from a radiopharmaceutical manufacturing site. Previous studies have demonstrated that the ³H species have persisted in the environment over three decades providing valuable supporting data to underpin the characterisation of the NMRM. The preparation and characterisation of the NMRM are described along with the subsequent application of the reference material in an international intercomparison exercise involving nineteen laboratories from nine countries. A reference value of 168 ± 22 Bq kg^?1 was derived from the data arising from the proficiency test.     

基于省区协调发展的GDP预测模型

基于柯布-道格拉斯生产函数与自回归移动平均模型(ARIMA)构建出一个GDP综合预测模型,并且考虑十九大全面建成小康社会与实现共同富裕的精神与国家关于技术、资本、劳动力等方面的区域平衡发展战略调整模型的参数,计算了2016—2050年中国分省的GDP总量与人均GDP,进一步通过计算省区间人均GDP的基尼系数来分析省区协调发展的水平。研究结果表明,在考虑省区协调发展时,各省区在2016—2050年间的GDP总量与人均GDP的差距逐渐缩小,省区间人均GDP的基尼系数将从2015年的0.219下降到2030年的0.176和2050年的0.137,未来区域间发展不均衡的态势在实现经济稳步增长同时可以得到缓解。     

基于不同邻近标签数选择的LANDMARC定位算法研究

对于基于射频识别的LANDMARC室内定位算法而言,该系统采用"k近邻"算法,通过选取k个与待测标签相邻且符合特定条件的参考标签,最后根据这些标签的位置结合权值估算出待测标签的坐标信息.但是在实际的操作过程中,最近邻参考标签数的选取无指导原则,具有一定的盲目性.针对这一问题,通过选取与待定位参考点最近邻的参考节点作为未知点,通过搜索法获得最优的邻近标签数k,在随后的未知节点的定位过程中,选取k个邻近标签进行定位.经过多次实验,最终得出结论,使用改进后的LANDMARC算法的性能要优于原来经典的LANDMARC算法,精确度提升了10%左右,同时避免了k值选取的盲目性.     

国际南极大地参考框架的构建与进展

回顾了南极大地参考框架发展的历史,总结了由国际南极研究科学委员会(SCAR)组织的历次南极地区大地测量观测活动的成果,并结合2007~2008第四次国际极地年(IPY)对南极大地参考框架的前景进行了展望,其中重点介绍了我国对构建南极大地参考框架的贡献。     

农业资源信息标准参考模型研究

为满足全社会对农业资源信息共享的迫切需求,使农业资源信息标准化的工作在统一的框架下进行,借鉴国际地理信息标准制定的思路,初步提出了农业资源信息标准化的技术框架--农业资源信息标准参考模型。该标准参考模型是由指导标准、通用标准、专用标准和领域标准等三个部分组成。本文重点阐述了5个指导标准、4类通用标准的标准组成和要点,提出依据基础标准制定专用标准作为农业资源信息较低层次标准制定的重要原则与方法。农业资源信息标准参考模型对于以信息的积累与服务为主的行业信息标准化具有普遍的指导意义。     

型钢混凝土梁柱框支剪力墙结构抗震性能试验研究

框支剪力墙结构在实际工程中经常被采用,震害表明钢筋混凝土框支剪力墙结构抗震性能较差,本文提出型钢混凝土梁柱框支剪力墙结构对此加以改进。作者进行了4个1/4缩尺模型在竖向荷载和单调及低周反复水平荷载作用下的对比试验,其中3个试件采用型钢混凝土转换梁、型钢混凝土框支柱,1个试件采用钢筋混凝土转换梁、钢筋混凝土框支柱。我们分析其承载力、刚度、变形、延性和破坏形态等。试验结果表明,型钢混凝土梁柱框支剪力墙结构承载力高、延性好、滞回曲线丰满,变形能力和耗能能力较强。